Hook and Loop disc with 10 punched holes diameter 225 mm for sander polishers and sander giraffe
Velcro sanding disc 225 mm for Parkside sander PWDS920B2 in grit 60-80-120-180-240 - 5 pieces
Velcro plate for different Scheppach sanding machines
Hood for giraffe sanders Scheppach DS920 and Parkside PWDS920A1
Pair of carbons for sander giraffe Scheppach and Parkside PWDS 920 A1
Carbon brush holder for sander giraffe Scheppach DS920, Parkside PWDS 920 A1
Piece 9 for sander giraffe Parkside PWDS 920 A1
Big circle brush for sander giraffe Parkside PWDS 920 A1
Circle brush for sander giraffe Parkside PWDS 920 A1
Switch for Scheppach, Parkside and Woodstar giraffe sander manufactured from 08/2016
Connecting joint ref 5903804027 for giraffe sanders Scheppach DS920 and Parkside PWDS920A1
Are you looking for a spare part for your Parkside drywall sander to replace a damaged component, repair a malfunction or keep your machine in good working condition? At Probois Machinoutils, we offer a selection of replacement parts and accessories for compatible Parkside drywall sanders, particularly the Parkside PWDS 920 A1.
A drywall sander, also known as a long-reach sander, wall and ceiling sander or giraffe sander, is a practical power tool for renovation, interior finishing and surface preparation before painting.
Thanks to its extended handle and adjustable sanding head, it makes sanding walls and ceilings easier, particularly when working on surfaces that are difficult to reach with conventional handheld sanders.
These machines are commonly used for sanding plasterboard joints, joint compounds, fillers and other suitable surfaces before applying paint or decorative finishes.
With regular use, sanding discs and certain mechanical or electrical components naturally wear out. Fine sanding dust can also accumulate around the sanding head and ventilation openings, potentially affecting the machine's performance.
This category includes a range of Parkside drywall sander spare parts, such as hook-and-loop sanding pads, carbon brushes, carbon brush holders, switches, motor armatures, protective covers, brushes, sliding components and sanding discs.
Replacing a worn or damaged component can help restore your sander's operation without necessarily having to purchase a completely new machine.
The Parkside PWDS 920 A1 is one of the drywall sander models for which we offer several replacement components. Certain parts are also compatible with the Scheppach DS920 and selected drywall sanders manufactured under the Scheppach and Woodstar brands.
This compatibility between specific models makes finding replacement components easier, particularly when several machines use identical parts.
However, this does not mean that all Parkside, Scheppach and Woodstar drywall sanders use interchangeable components.
Before ordering, we recommend checking your machine's exact model number, manufacturing date when relevant, and the position number of the required component in the exploded parts diagram.
Correct identification helps prevent ordering mistakes and ensures that you select a replacement part suitable for your particular machine.
The hook-and-loop sanding pad for Parkside drywall sanders is an essential component of the sanding head. It holds the abrasive sanding discs securely in position during operation.
Over time, the hook-and-loop surface can gradually lose its gripping ability. Sanding discs may no longer adhere properly and can move or become detached during sanding.
A worn or damaged sanding pad may also cause excessive vibration and affect the consistency of the finished surface.
We offer a hook-and-loop sanding pad compatible with selected Scheppach drywall sanders and the Parkside PWDS 920 A1.
Replacing the sanding pad may be necessary in several situations:
Before purchasing a replacement pad, check its dimensions and mounting system to ensure compatibility with your machine.
Sanding discs for Parkside drywall sanders are essential consumables for preparing and finishing walls and ceilings.
Our range includes 225 mm diameter hook-and-loop sanding discs featuring dust extraction holes to help remove sanding dust during operation.
These abrasives are available in different grit sizes to suit various sanding applications and finishing requirements.
The appropriate grit depends on the material, the condition of the surface and the desired result:
Depending on the product reference, we also offer packs containing five or six 225 mm sanding discs with ten dust extraction holes.
For consistent sanding results, it is important to choose an abrasive suitable for the material being worked and replace discs when they become worn or clogged.
Make sure the dust extraction holes in the sanding disc align with those in the sanding pad to maintain efficient dust removal.
Carbon brushes for Parkside drywall sanders are wear components used in electric motors equipped with a brushed motor system.
They provide electrical contact with the motor armature commutator and contribute to the correct operation of the motor.
During use, carbon brushes gradually wear down. When they become too short or damaged, the sander may no longer operate correctly.
Worn carbon brushes can cause several symptoms:
However, these symptoms can also result from other faults. The motor should therefore be inspected before concluding that the carbon brushes need replacing.
Our selection includes carbon brushes with references 5903801006 and 5903804017, intended for certain Scheppach, Parkside and Woodstar drywall sanders.
Always check which reference corresponds to your machine before placing an order.
The carbon brush holder keeps the carbon brush in its correct operating position and allows proper contact with the electric motor commutator.
A damaged, deformed or electrically defective brush holder may interfere with the motor's electrical supply.
We offer the carbon brush holder reference 5903804018, compatible with selected Scheppach, Parkside and Woodstar drywall sanders.
When replacing carbon brushes, it is advisable to inspect the condition of the brush holders and commutator as well.
Any work involving the electric motor must only be carried out after the machine has been completely disconnected from the power supply and by someone with the necessary technical knowledge.
The motor armature for Parkside drywall sanders is an internal component of the electric motor. It plays an important role in converting electrical energy into rotational movement.
A damaged armature may cause the motor to stop working, produce excessive sparks, make unusual noises or overheat.
However, these symptoms alone are not sufficient to confirm an armature failure. Electrical and mechanical checks should be carried out before replacing this component.
Our catalogue includes the motor armature reference 5903804015, designed for certain Scheppach, Parkside and Woodstar drywall sanders manufactured from August 2016 onwards.
The manufacturing date is therefore an important factor when identifying the correct version of this replacement part.
Replacing a motor armature involves dismantling part of the electric motor and must be carried out carefully in accordance with the manufacturer's instructions.
The on/off switch of a Parkside drywall sander controls the starting and stopping of the electric motor.
Over time, the internal electrical contacts or mechanical operating components may deteriorate.
A faulty switch can prevent the sander from starting or cause intermittent operation.
We offer an on/off switch for certain Scheppach, Parkside and Woodstar drywall sanders manufactured from August 2016 onwards.
Before replacing the switch, it is important to confirm that the fault actually originates from this component rather than the power cable, carbon brushes or another part of the motor.
Electrical switch replacement should be performed by a qualified person who can ensure that the original wiring arrangement and electrical specifications are respected.
The sanding head of a drywall sander contains several components that help guide the machine over the surface and limit the dispersion of sanding dust.
Our selection includes a protective cover for Scheppach DS920 and Parkside PWDS 920 A1.
This cover helps protect the sanding head and supports dust management around the abrasive sanding pad.
We also offer several replacement components associated with this part of the machine:
These components may need replacing when they become broken, worn or otherwise damaged.
We recommend consulting the machine's exploded parts diagram to identify the required component and its exact position within the assembly.
To purchase a compatible spare part for your Parkside drywall sander, it is important to check the information displayed on the machine's identification plate.
The Parkside brand name alone is not enough to guarantee compatibility. Different versions within the same range of drywall sanders may feature design or manufacturing differences.
Before ordering, we recommend checking the following information:
A visual comparison can help identify a component, but it does not always guarantee compatibility.
For electrical replacement parts and motor components, it is particularly important to use the references and technical specifications specified by the manufacturer.
A Parkside drywall sander regularly used for sanding joint compounds, fillers and plasterboard surfaces is exposed to fine dust that can accumulate around the sanding head and ventilation openings.
Appropriate maintenance helps preserve the machine's performance and reduce premature wear on certain components.
After use, we recommend checking the condition of the hook-and-loop sanding pad, inspecting the abrasive discs and cleaning accessible areas according to the manufacturer's instructions.
The dust extraction system should also be kept in good condition to help limit dust accumulation during sanding operations.
It is equally important to inspect the power cable, protective components and fastening elements regularly.
If unusual noises, excessive vibration or irregular operation occur, stop using the machine immediately and identify the cause before restarting it.
When sanding fillers or plasterboard compounds, use a dust extraction system suitable for the dust produced, together with the necessary personal protective equipment, including appropriate respiratory protection.
Before carrying out any maintenance or replacing a component, always disconnect the drywall sander completely from its electrical power supply.
At Probois Machinoutils, we offer a selection of replacement parts for a wide range of DIY, construction and workshop machines.
Our catalogue includes spare parts for selected Parkside, Scheppach and Woodstar machines, helping users maintain and repair various power tools.
In this category dedicated to Parkside drywall sander spare parts, you can find available components for compatible models, particularly the Parkside PWDS 920 A1.
Whether you need a hook-and-loop sanding pad, 225 mm sanding discs, carbon brushes, a carbon brush holder, a motor armature, an on/off switch, a protective cover or a sanding head component, check the individual product descriptions to confirm compatibility with your machine.
Replacing a worn or damaged component can help extend the service life of your drywall sander and avoid purchasing a new machine when a repair is technically possible and worthwhile.
Discover Parkside drywall sander spare parts at Probois Machinoutils and keep your machine in good working condition with suitable replacement components for sanding, renovation and wall and ceiling finishing projects.
