Mechanical planing height indicator diameter 18 mm
Trapezoidal belt for jointer, planer and woodworking combination according to the list below
Locking handle for thicknesser planer
Counter iron for Holzmann HOB260NL thicknesser planer
Locking screw for M6 irons with a square head on the planer jointer shaft of different brands (former ref Scheppach 3302636043)
Blade clamp in 250 mm for planer thicknesser Holzmann HOB260NL - Sold individually without screws
Handle No. 167 or 175 for locking the connection guide of Holzmann HOB260ABS and Bernardo PT260/PT305D planers
Height adjustment handwheel for the thickness planer of the Holzmann HOB260NL planer thicknesser. This spare part is used to raise and lower the thicknessing table to adjust the required planing thickness.
Discover our selection of spare parts for the Holzmann HOB260NL planer thicknesser, grouped together to make maintenance, troubleshooting and repairs on your woodworking machine easier.
The Holzmann HOB260NL combines two essential woodworking operations: surface planing, which produces a flat face and a reference edge, and thicknessing, which brings wooden workpieces to the required thickness.
Over time, certain mechanical components may wear out, become deformed or deteriorate. A damaged belt, broken handwheel, faulty locking lever or damaged blade clamping component can interfere with the machine's proper operation.
At Probois Machinoutils, we offer a selection of components designed to replace worn or damaged parts on your Holzmann HOB260NL.
This category includes a V-belt, a mechanical thicknessing height indicator, locking levers, a blade clamping bar, locking screws, a 250 mm clamping wedge, a blade spring and a thicknessing table adjustment handwheel.
Our aim is to help you identify the component required for your repair and carry out a targeted replacement without unnecessarily changing other parts that are still in working condition.
The V-belt plays an important role in transmitting movement between the machine's pulleys.
It transfers the mechanical power required to operate the system it drives.
Our selection includes a V-belt for planer thicknessers and combination woodworking machines, intended for the models specified in its compatibility list.
A belt may need replacing if it shows:
Cracks or splits.
Significant wear on its sides.
Signs of fraying.
Abnormal deformation.
Slipping during operation.
Breakage.
A worn belt can cause irregular power transmission and interfere with the machine's operation.
Before fitting a new belt, it is important to check the condition of the pulleys and investigate any possible cause of premature wear.
A damaged pulley or blocked mechanism can quickly damage a replacement belt.
Always check the belt profile, dimensions and compatibility before ordering.
Our category includes a blade clamping bar for the Holzmann HOB260NL planer.
The blade clamping bar forms part of the cutterblock's blade retention system, depending on the machine's design.
It helps ensure the correct positioning and clamping of the cutting components.
A blade clamping bar must be in good condition to allow the blades to be secured in accordance with the manufacturer's instructions.
It may need replacing if it shows:
Deformation.
Cracks or breakage.
Damage to its contact surfaces.
Damage around the clamping areas.
Wear that prevents the blades from being held securely.
A damaged blade clamping bar must not be reused without inspection.
The safety of the blade assembly depends on the condition of all its fastening components.
Before ordering, identify the exact clamping bar on the exploded parts diagram for your Holzmann HOB260NL and check its specifications.
Never replace a blade clamping bar with a merely similar-looking component whose compatibility has not been confirmed.
We also offer a 250 mm blade clamping wedge for the Holzmann HOB260NL planer thicknesser.
This component forms part of the cutterblock's blade fastening system.
It helps hold the cutting elements in place according to the assembly specified by the manufacturer.
A clamping wedge may need replacing if it is deformed, cracked or broken, or if its contact surfaces are damaged.
A damaged component may prevent the blades from being clamped correctly.
It is essential to inspect the condition of the clamping wedge before reassembly whenever damage is suspected.
Important: this 250 mm clamping wedge is sold individually, without screws.
If the fastening screws are also damaged, they must be identified and ordered separately.
Before purchasing, check the dimensions of the original component and its compatibility with your machine.
The locking screws help secure the blades within the cutterblock's clamping system.
Our selection includes an M6 square-head blade locking screw, intended for the cutterblocks of the planer thicknesser models specified on its product page.
This screw is also associated with the former Scheppach reference 3302636043.
A clamping screw may need replacing if:
Its thread is damaged.
Its head is deformed.
It shows significant corrosion.
It is broken.
It can no longer provide the specified clamping force.
A damaged screw must not be forced during installation.
Using an unsuitable screw can compromise blade retention or damage other components of the clamping system.
Before ordering, check the thread diameter, head specifications and compatibility information.
Never use a replacement screw whose specifications do not match those required by the manufacturer.
Our category includes a planer blade spring, offered for the machines specified on its product page.
Depending on the cutterblock's design, springs help position the blades during installation and adjustment.
They may help hold the blades in a position that allows them to be adjusted before final tightening.
A spring may need replacing if it shows:
Breakage.
Permanent deformation.
Loss of elasticity.
Significant corrosion.
Irregular operation.
A damaged spring can make accurate blade adjustment more difficult.
When carrying out maintenance, it is important to inspect all the components of the blade fastening system.
Replacing a spring does not eliminate the need to check the condition of the screws, clamping bars and other associated components.
Blade installation and adjustment must be carried out with the machine unplugged and in accordance with the manufacturer's instructions.
The blade fastening system is a mechanical assembly in which every component must be in good condition.
If a blade appears to be incorrectly secured or difficult to adjust, it is important not to assume immediately that a single component is responsible.
Check the following in particular:
The condition of the blades.
The blade clamping bars.
The clamping wedges.
The locking screws.
The springs.
The cutterblock's contact surfaces.
A deformed clamping bar can prevent correct positioning.
A screw with a damaged thread can compromise the clamping system.
A deteriorated spring can make adjustment more difficult.
Inspection should therefore cover the entire affected assembly.
Warning: blade fastening components are essential safety parts. Never operate the machine if their installation or clamping shows any signs of a fault.
Installation must be carried out in accordance with the manufacturer's instructions.
Adjusting the thicknessing height determines the final thickness of wooden workpieces.
Our selection includes a mechanical thicknessing height indicator, intended for various Bernardo, Holzmann and Jean l'Ébéniste planer thicknessers, according to the product's compatibility list.
This component is designed for a configuration with an 18 mm diameter handwheel fitting.
The indicator provides a mechanical reference when adjusting the thicknessing height.
A damaged indicator can make the setting more difficult to read or monitor.
It may need replacing if it is broken, its mechanism is damaged or it no longer performs its function correctly.
Before ordering, check the specifications of your machine and the original indicator.
The specified 18 mm diameter is an important measurement to check. Compatibility must also be confirmed using the list of compatible machines.
Our category includes a height adjustment handwheel for the thicknessing table of the Holzmann HOB260NL.
This component operates the mechanism used to raise and lower the table.
It therefore plays a direct role in preparing the machine for thicknessing operations.
A handwheel in good condition allows the adjustment system to be operated correctly.
It may need replacing if it shows:
Breakage.
Cracks.
Deformation.
A damaged fastening system.
Damage that prevents normal operation.
However, a handwheel that becomes difficult to turn is not necessarily defective.
The problem may originate from the table's raising and lowering mechanism.
Before replacing the handwheel, it is therefore important to check that there is no mechanical obstruction.
Never force an adjustment handwheel when the table shows abnormal resistance.
A preliminary diagnosis helps prevent damage to the replacement component.
Locking levers are used to secure certain adjustable machine components, depending on their position and function.
Our selection includes a locking lever for planer machines, intended for the models specified in its compatibility list.
A lever may need replacing if it is broken or cracked, or if its mechanism no longer provides proper locking.
Possible symptoms include:
A broken handle.
Insufficient clamping.
A damaged thread.
Difficulty operating the mechanism.
An adjustable component that can no longer be secured properly.
Before ordering, identify precisely which locking lever needs replacing.
Its dimensions, thread and fastening system must match the original assembly.
A visually similar lever is not necessarily compatible.
Do not operate the machine if a component that requires locking can no longer be secured correctly.
Our category also includes an indexing lever with a cylindrical base, position 167 or 175, intended for locking the planer fence on the machines specified on its product page.
This reference is notably listed for the Holzmann HOB260ABS and Bernardo PT260/PT305D models.
An indexing lever operates a clamping mechanism while allowing its handle to be repositioned, depending on its design.
This can be useful when the available space prevents the lever from completing a full rotation.
However, the presence of this part in the HOB260NL category does not, by itself, confirm compatibility with this model.
Before ordering it for your Holzmann HOB260NL, you must check that your machine appears in the product page's list of compatible models.
Also check the part position number, thread and dimensions of the original component.
A planer fence must be adjustable and then securely locked in accordance with the system specified by the manufacturer.
If the fence no longer stays in position, several components may be responsible.
Start by checking:
The locking lever.
The clamping mechanism.
The threads.
The contact surfaces.
The fence fastening components.
A broken lever or one with a damaged thread may prevent effective locking.
However, a locking fault may also originate from another component within the mechanism.
Replacing the lever alone will therefore not necessarily solve the problem.
It is important to identify the exact cause before ordering a part.
Do not carry out planing operations if the fence cannot be secured in accordance with the manufacturer's instructions.
The thicknessing table's height adjustment mechanism is used regularly.
If the handwheel becomes difficult to turn or the table no longer moves correctly, it is important to investigate the cause.
Several possibilities should be considered:
A broken or damaged handwheel.
A blocked adjustment mechanism.
An accumulation of wood chips in an accessible area.
A damaged mechanical component.
A malfunction involving an associated part.
Start by unplugging the machine and consulting the manufacturer's instructions.
Do not force the handwheel.
Abnormal resistance may indicate a problem that cannot be resolved simply by replacing the control.
Once the cause has been identified, you can determine whether the raising and lowering handwheel offered in this category is the part you need.
Certain spare parts may be shared by several Holzmann planer thicknesser models.
This is particularly the case for components offered for different machines on the same product page.
However, parts for the Holzmann HOB260NL are not automatically compatible with the HOB260ABS, HOB260ECO or HOB260ECO SMW2 models.
These machines may differ in their design, dimensions or fastening systems.
This precaution is particularly important for blade clamping components, handwheels, levers and transmission parts.
It is therefore essential to check the compatibility information specific to each reference.
Visual similarity alone is not sufficient proof of compatibility.
To avoid ordering the wrong part, start by identifying your machine precisely.
Record the information on its identification plate and consult the exploded parts diagram corresponding to your model.
Useful information includes:
Brand: Holzmann.
Exact model: HOB260NL.
Serial number.
Month and year of manufacture, where indicated.
Part position number on the exploded diagram.
Manufacturer's reference, where available.
Dimensions and specifications of the original component.
For a belt, check its profile and dimensions.
For a locking screw, check the thread diameter, head and any other relevant specifications.
For a clamping wedge, check its length and shape in particular.
For a handwheel or lever, check the fastening system.
For a mechanical indicator, check the mounting specifications, including the diameter indicated on its product page.
WARNING: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also check your machine's month and year of manufacture and serial number.
Regular maintenance helps identify signs of wear before they cause a more serious breakdown.
With the machine unplugged and in accordance with the manufacturer's instructions, periodically inspect accessible components.
Pay particular attention to the condition of the belt, adjustment mechanisms, levers and fastening components.
Remove wood chips and accumulated dust using the recommended methods.
Watch for unusual noises, vibrations and adjustment difficulties.
When working on the blades, inspect the fastening components and strictly follow the installation procedures.
A damaged clamping component must not be reused without inspection.
Do not continue using the machine if a mechanical or safety-related fault is suspected.
Appropriate maintenance helps preserve adjustment accuracy and extend the service life of your equipment.
A localised fault does not always require replacing your entire planer thicknesser.
A broken belt, damaged handwheel, deteriorated lever or worn blade clamping component can be replaced individually when a compatible spare part is available.
However, it is important to investigate the cause of the problem.
A belt that deteriorates quickly may indicate a fault involving a pulley.
A broken handwheel may be the result of a blocked adjustment mechanism.
A lever that no longer clamps properly may indicate a damaged thread or associated component.
Replacing the visibly damaged part must therefore not conceal a more serious problem.
A targeted repair, carried out after an appropriate diagnosis, allows you to retain components that are still functional and extend the service life of your machine.
At Probois Machinoutils, discover our selection of spare parts for the Holzmann HOB260NL planer thicknesser to maintain your machine and replace worn or damaged components.
Explore our V-belt, mechanical thicknessing height indicator, locking levers, blade clamping bar, blade locking screws, 250 mm clamping wedge, blade spring and thicknessing table height adjustment handwheel.
Each component must be selected according to the exact model of your machine and the information provided on its product page.
Looking for a part that is not included in our selection?
Send us your machine's exact model, serial number and, if possible, the part's position number on the exploded diagram.
A photograph of the original component and the machine's identification plate may also help us identify it.
Order your Holzmann HOB260NL spare parts from Probois Machinoutils to maintain your planer thicknesser, carry out an appropriate repair and extend the service life of your machine.
