Spare parts for Leman RAD260 and Lurem RD26 planer thicknesser

Find our selection of spare parts for Leman RAD260 and Lurem RD26 / RD26F planer thicknessers, designed to help you maintain, repair and extend the service life of your woodworking machine.

These 260 mm planer thicknessers combine surface planing and thicknessing operations in a single machine, making them suitable for preparing and dimensioning timber in the workshop.

With regular use, some mechanical, electrical and transmission components will naturally wear and may eventually need to be replaced.

We offer a range of replacement parts for the Leman RAD260 and Lurem RD26 / RD26F, subject to carefully checking compatibility with the exact version and production period of your machine.

Drive belts for Leman RAD260 and Lurem RD26

Drive belts play an essential role in the operation of a planer thicknesser.

They transfer power between the motor and the different mechanical components of the machine.

Over time, a belt can:

• stretch;

• crack;

• become worn;

• slip;

• lose its grip;

• eventually break.

A loose or damaged belt can cause unusual noise, poor power transmission or irregular machine operation.

It is therefore advisable to inspect the belts regularly and replace them when significant signs of wear appear.

Pulleys, shafts and transmission components

The drive system also includes various components such as pulleys, pulley shafts, bushes, circlips and other mechanical parts.

These components work together and must remain in good condition to ensure smooth and reliable power transmission.

A worn or damaged pulley may cause premature belt wear. Similarly, excessive play in a shaft or a damaged bush can cause vibration or poor alignment of the transmission system.

This category includes individual replacement components that can help repair these mechanisms without necessarily replacing a complete assembly.

Planer knives for RAD260 and RD26

The quality of both surface planing and thicknessing depends directly on the condition of the planer knives.

The Leman RAD260 and compatible versions of the Lurem RD26 use 260 mm reversible planer knives.

Correctly fitted and sharp knives help produce a clean timber surface while reducing unnecessary strain on the motor and transmission system.

Worn or blunt knives can cause:

• poor surface finish;

• timber tear-out;

• marks on the workpiece;

• increased cutting resistance;

• additional strain on the motor.

Before ordering replacement planer knives, always check their dimensions, thickness and fitting system against the knives currently installed in your machine.

Knife holders, clamping wedges and knife fixing parts

The cutterblock also contains various components used to position and secure the planer knives.

Depending on the version of the machine, it may be necessary to replace a knife holder, clamping wedge, screw or another part of the knife fixing system.

These components must remain in good condition to ensure that the knives are correctly secured during cutterblock rotation.

A damaged or distorted clamping component, or a part with a damaged thread, should be replaced before the machine is put back into operation.

Feed rollers and thicknesser feed system

During thicknessing, the feed rollers automatically move the timber through the machine.

Correct operation of this mechanism is essential to maintain smooth and consistent feeding of the workpiece.

Wear or damage within the feed system may cause:

• irregular timber feeding;

• jerky movement;

• slipping;

• workpiece stoppage;

• inconsistent thicknessing results.

Feed rollers, chains, gears, springs and associated components should therefore be inspected whenever a feed problem occurs.

Chains, gears and mechanical drive components

Various gears, chains and transmission components contribute to the operation of the planer thicknesser.

These parts are subjected to repeated mechanical loads and may gradually wear over time.

A loose chain, damaged gear or component with excessive play can cause noise, jerky feeding or loss of drive.

Regular inspection can help identify wear before it causes damage to other parts of the machine.

Bearings, bushes, circlips and shafts

Bearings, bushes, circlips, shafts and other small mechanical components are essential for supporting and guiding the moving parts of the machine.

Despite their relatively small size, wear to these components can significantly affect the operation of the planer thicknesser.

Mechanical noise, unusual vibration, excessive play or poor alignment may indicate that one of these components needs to be inspected or replaced.

Maintaining your Leman RAD260 or Lurem RD26

Regular maintenance can extend the service life of your Leman RAD260 or Lurem RD26 planer thicknesser and reduce the risk of unexpected breakdowns.

It is advisable to:

• regularly inspect the drive belts;

• check the pulleys and their alignment;

• inspect the feed mechanism;

• check the condition of the feed rollers;

• replace worn or blunt planer knives;

• regularly remove wood chips and dust;

• keep the tables clean;

• use suitable dust extraction;

• investigate unusual noise or vibration.

Checking the machine as soon as a problem appears can prevent a worn component from damaging other parts.

Identifying the correct Leman RAD260 spare part

The Leman RAD260 has an exploded parts diagram with individual position numbers to help identify its replacement components.

Before ordering, we strongly recommend locating the relevant part on the exploded diagram and comparing its appearance and dimensions with the original component.

Some spare parts in this category may also be compatible with other planer thicknessers of similar design.

However, always refer to the list of compatible machines provided on each individual product page.

Special attention for Lurem RD26 and RD26F machines

The Lurem RD26 and RD26F were produced in different configurations during their production period.

Depending on the year of manufacture, some components may differ from the parts used on the Leman RAD260.

For this reason, a part should not be ordered solely because the product description mentions Lurem RD26 or RD26F.

Always compare the original component with the photographs, dimensions and compatibility information shown on the product page.

IMPORTANT: check compatibility before purchasing

IMPORTANT: BEFORE PURCHASING, ALWAYS CHECK THE LIST OF COMPATIBLE MACHINES.

For certain spare parts, particularly those intended for Lurem RD26 and RD26F machines, the month and year of manufacture and the serial number of your machine may be required to confirm compatibility.

Do not rely solely on the general appearance of the machine or component.

Check the part reference, dimensions, position number on the exploded diagram and the appearance of the original component against the information provided on the product page.

Repair your Leman RAD260 or Lurem RD26 with the correct spare parts

Drive belts, pulleys, shafts, bushes, circlips, reversible planer knives, knife holders, clamping wedges, feed rollers, chains, gears, bearings and other mechanical components: find the spare parts for Leman RAD260 and Lurem RD26 / RD26F planer thicknessers you need to maintain and repair your machine.

Replacing an individual worn component can significantly extend the working life of a planer thicknesser and help avoid replacing the complete machine.

For older Lurem woodworking machines in particular, careful identification of the original part remains essential before placing an order.