Rubber bandage for flywheel Parkside PBS 350 A1, Scheppach HBS20, HBS30 and Kity SAR200 band saws
Black rubber for the replacement of the steering wheel bandage on some Scheppach, Parkside and Kity band saws
Black rubber for the replacement of the steering wheel bandage on some Scheppach, Parkside and Kity band saws
Black rubber for steering wheel bandage replacement for different Woodster, Kity, Scheppach and Parkside band saws
Screw 4.8x9.5 mm part number 02798131 for Scheppach, Kity and Parkside machines according to the following list : LIST OF COMPATIBLE MACHINES
Are you looking for a spare part for your Parkside band saw to repair your machine, replace a worn component or restore its performance? At Probois Machinoutils, we offer a selection of replacement parts for certain Parkside band saws, including rubber wheel tyres and compatible fixing components.
Parkside band saws are used for various woodworking, DIY and home improvement projects. They allow users to perform straight cuts, curved cuts and other cutting operations using a suitable band saw blade.
Like any woodworking machine, a band saw contains mechanical components that are subject to wear and operating stresses. Wheel tyres, blade guides, bearings, blade tensioning mechanisms and fixing elements all play an important role in the machine's operation.
When a component becomes damaged or worn, replacing it with a suitable spare part may help extend the service life of the machine and restore satisfactory working conditions.
This category brings together the Parkside band saw spare parts currently offered in our catalogue. Each component must be selected according to its technical specifications and compatibility with your particular machine.
Our selection mainly includes components designed for the wheels of certain Parkside band saws, along with compatible fixing elements.
You can find the following replacement parts:
These components may be compatible with several machine models, depending on the information provided in their individual product descriptions.
It is important to remember that the two rubber wheel tyres have different dimensions. They are therefore not automatically interchangeable, even when they are intended for wheels with the same nominal diameter.
The rubber wheel tyre for a Parkside band saw is an essential component of the machine's blade drive system.
It is a rubber covering fitted around the circumference of the band saw wheel. It provides the contact surface between the wheel and the blade.
This covering helps maintain adequate grip between the blade and the wheel, reducing unwanted slipping and promoting smooth blade movement during cutting operations.
It also helps protect the blade by preventing direct contact with the metal surface of the wheel.
Over time, rubber wheel tyres may become hard, cracked, worn or detached from the wheel. These problems can interfere with blade tracking and cause irregular operation.
A damaged wheel tyre may lead to:
When a wheel tyre becomes damaged, replacing it with a correctly sized component can help restore smooth and reliable operation.
We offer a rubber wheel tyre for band saw wheels with a diameter of 200 mm, measuring 11.8 mm in width and 2.3 mm in thickness.
This component is intended for certain Parkside, Scheppach and Kity band saws.
It can be used to replace a worn or damaged wheel covering when the dimensions and compatibility correspond to those required by the machine.
Before ordering, it is essential to check the wheel diameter and compare the width and thickness of the original tyre with the replacement part.
A tyre that is too wide, too narrow or has an unsuitable thickness may affect installation and prevent the blade from tracking correctly.
Our catalogue also includes a rubber wheel tyre for 200 mm band saw wheels, measuring 12.5 mm in width and 3 mm in thickness.
This black rubber tyre is intended for various Woodster, Kity, Scheppach and Parkside band saws, depending on the compatible models.
It provides a replacement solution when the original rubber covering has become worn, cracked or damaged.
Although its nominal wheel diameter is identical to that of the previous tyre, its dimensions are different.
The 11.8 mm and 12.5 mm wide wheel tyres should not be considered interchangeable without checking compatibility.
To select the correct component, consult the product specifications and compare them with the dimensions of the original wheel tyre.
The rubber tyres fitted to band saw wheels should be inspected regularly, particularly when the machine develops blade tracking problems or unusual vibrations.
Several signs may indicate that replacement is necessary:
These symptoms may also result from other issues, including incorrectly adjusted blade guides, unsuitable blade tension or wheel alignment problems.
It is therefore advisable to inspect the complete blade guidance system before concluding that the wheel tyres are responsible for the fault.
Replacing a band saw wheel tyre requires following the machine manufacturer's instructions and any fitting recommendations supplied with the replacement component.
Before carrying out any work, always disconnect the band saw from the electrical power supply.
Wait until the blade has completely stopped, then remove it according to the machine's operating instructions to gain access to the wheels.
The damaged tyre can then be removed carefully without damaging the wheel surface.
Clean the contact area thoroughly and check that no residue, deformation or mechanical damage remains.
The new rubber tyre must be installed using the method appropriate for its design, while respecting the specified dimensions and fitting instructions.
After installation, check that the tyre is correctly positioned and adjust the blade according to the manufacturer's recommendations.
Before restarting the machine, make sure the blade tracks correctly, all guards are fitted and no mechanical abnormalities are present.
In addition to rubber wheel tyres, our catalogue includes certain fixing components compatible with Parkside machines.
We offer the fixing screw reference 02798131, measuring 4.8 x 9.5 mm, intended for certain Scheppach, Kity and Parkside machines.
Screws and other fastening components play an important role in securing mechanical parts and protective devices.
A missing, damaged or stripped screw should be replaced with a suitable component.
Similar dimensions alone do not guarantee that two screws are interchangeable.
It is also important to check the thread type, head design, fastening characteristics and original part reference.
For screw reference 02798131, always consult the list of compatible machines provided on the product page before ordering.
Certain Parkside band saws share components with machines sold under other brands, including Scheppach, Woodster and Kity.
This compatibility may concern specific mechanical components, such as certain rubber wheel tyres or fixing parts.
As a result, the same spare part reference may be suitable for several machines sold under different brand names.
However, this compatibility should never be assumed for every component.
Two band saws may look similar while using different mechanical parts.
Wheel dimensions, blade guidance systems, fastening arrangements and component specifications may vary between models and production versions.
At Probois Machinoutils, compatibility should therefore be checked using the available technical specifications and part references.
To order a spare part compatible with your Parkside band saw, it is essential to identify the machine accurately.
We recommend checking the following information:
When choosing a rubber wheel tyre, pay particular attention to the wheel diameter, tyre width and thickness.
A difference of only a few millimetres may be enough to make a replacement tyre unsuitable for your machine.
It is therefore better to compare the technical specifications carefully rather than relying solely on a product photograph.
Regular maintenance helps preserve cutting accuracy, mechanical performance and safe operating conditions on your Parkside band saw.
Sawdust can accumulate around the wheels, blade guides and tensioning mechanisms. Appropriate cleaning helps prevent deposits from interfering with the machine's operation.
We recommend checking the following components regularly:
Incorrect blade tension, poorly adjusted guides or damaged wheel tyres can cause irregular cuts and premature wear of certain components.
Before cleaning, adjusting or repairing the machine, always disconnect it from the power supply and wait until the blade has completely stopped.
All maintenance and repair work must follow the manufacturer's instructions, and safety devices must never be bypassed or disabled.
A band saw that develops a mechanical problem does not necessarily need to be replaced.
When the fault involves an identifiable component that can be replaced, repairing the machine may help extend its useful life.
Replacing a worn rubber wheel tyre or a damaged fixing component can contribute to restoring certain mechanical functions.
This approach offers several advantages. It allows you to keep using equipment you already own, may reduce costs when the repair is economically worthwhile and helps limit waste associated with premature machine replacement.
However, repairs must always be carried out under conditions that protect the operator's safety.
If a wheel is deformed, the machine structure is damaged or a safety device has a serious fault, a thorough inspection is essential before returning the band saw to service.
Probois Machinoutils specialises in woodworking machinery, accessories and replacement parts for a wide range of brands.
We offer a selection of spare parts for Parkside band saws to help you maintain and repair your equipment.
Our range includes rubber wheel tyres for 200 mm band saw wheels, available in different widths and thicknesses depending on the reference, as well as certain fixing components compatible with Parkside, Scheppach and Kity machines.
Each replacement part must be selected according to the technical specifications of your band saw and the compatibility information provided on its product page.
Whether you need a rubber wheel tyre for a Parkside band saw, a mechanical component or a fixing screw, always check the exact dimensions and part reference before ordering.
With the correct Parkside band saw replacement parts, you can carry out the necessary repairs, maintain your machine in good working condition and extend its service life.