Bernardo Table Saw Spare Parts – Repair and Maintain Your Machine

Is your Bernardo table saw showing signs of wear, or does it have a broken or faulty component? Browse our selection of Bernardo table saw spare parts designed for the maintenance and repair of various stationary circular saws from the brand.

A table saw consists of numerous mechanical, electrical and adjustment components that contribute to cutting accuracy, motor performance and operator safety.

Over time and with repeated use, certain components may wear out, become misaligned or require replacement.

At Probois Machinoutils, we help you identify the correct replacement parts for Bernardo table saws so you can repair your equipment and extend its service life.

Spare Parts for Bernardo TK200 and TK250 Table Saws

The Bernardo TK200 and TK250 table saws are used for a wide range of woodworking and timber-cutting applications.

Our category includes a dedicated section for spare parts compatible with the following models:

  • Bernardo TK200

  • Bernardo TK200R

  • Bernardo TK200RS

  • Bernardo TK250

  • Bernardo TK250R

  • Bernardo TK250RS

Depending on the machine version and the available spare parts, it may be necessary to replace components of the drive system, adjustment mechanisms, guiding system or electrical equipment.

Please note: a part suitable for a TK200 is not necessarily compatible with a TK250, and the R and RS versions may have different components. Always check your machine's exact model reference before ordering.

Spare Parts for Bernardo STS1300ECO and STS1600ECO Table Saws

The Bernardo STS1300ECO and STS1600ECO also have their own dedicated spare parts subcategory.

During their service life, these machines may require the replacement of mechanical or electrical components.

Depending on the problem encountered, components that may need inspection include:

  • The blade height adjustment mechanism.

  • The blade tilting mechanism.

  • Guiding and adjustment systems.

  • Transmission components.

  • Switches and electrical components.

  • Guards and safety devices.

The compatibility of each replacement part must be checked against the exact Bernardo table saw model and, where necessary, its serial number.

Spare Parts for the Bernardo PKS250P Table Saw

Are you looking for a replacement part for your Bernardo PKS250P table saw?

A dedicated subcategory is available for this model to help you find suitable components more easily.

Depending on your repair requirements and the available references, you can search for parts needed for the operation, adjustment or maintenance of your machine.

To avoid ordering an incorrect component, we recommend consulting the exploded parts diagram of your Bernardo PKS250P and identifying the corresponding part number.

Which Components May Need Replacing on a Bernardo Table Saw?

A Bernardo table saw contains several mechanical and electrical assemblies that may require maintenance or repair.

Common types of replacement components include:

  • Drive belts: transmit power from the motor to the saw spindle on machines equipped with a belt-drive system.

  • Switches and contactors: contribute to the electrical control and safety of the machine.

  • Capacitors: fitted to certain single-phase motors and involved in motor starting or operation.

  • Bearings: help ensure smooth rotation of shafts and mechanical components.

  • Handwheels and adjustment mechanisms: allow blade height or tilt adjustment, depending on the model.

  • Fences and clamping components: help maintain settings and guide workpieces accurately.

  • Guards and safety devices: contribute to safer machine operation.

  • Screws and fastening components: secure the various mechanical assemblies.

This list describes common table saw components. Their availability and compatibility depend on the specific Bernardo model and machine version.

How to Identify the Correct Spare Part for Your Bernardo Table Saw

To order a Bernardo replacement part that fits your machine, it is important to carry out a few checks.

1. Identify the exact model of your table saw

Check the machine's identification plate to determine its precise model: TK200, TK250, STS1300ECO, STS1600ECO, PKS250P or another version.

2. Check the serial number

Some machines may have undergone design changes over the years. The serial number can help distinguish between different versions.

3. Consult the exploded parts diagram

An exploded diagram allows you to identify the machine's components and locate the reference number of the required part.

4. Compare the part specifications

Whenever possible, check dimensions, mounting points, electrical specifications and other relevant characteristics to confirm compatibility.

5. Contact us if you are unsure

If you cannot find the required component, please provide the exact Bernardo machine model, its serial number and the item number shown on the exploded diagram.

This information will help us review your request more efficiently.

When Should You Replace a Part on a Bernardo Table Saw?

Several symptoms may indicate that a component of your Bernardo table saw requires inspection:

  • The machine no longer starts or has difficulty starting.

  • The motor runs, but the saw blade does not rotate correctly.

  • Unusual vibrations or noises occur.

  • Blade height or tilt adjustments become difficult.

  • The rip fence or another guide no longer locks securely.

  • A mechanical component develops excessive play.

  • A safety guard is broken or no longer functions correctly.

  • A component shows visible wear or damage.

These symptoms do not necessarily mean that the suspected part is defective. Incorrect adjustment, insufficient maintenance or another mechanical or electrical issue may produce similar symptoms.

Always disconnect the machine from the electrical supply before carrying out any maintenance or repair work. Work involving electrical components or safety devices should be performed by a suitably qualified person.

Maintaining Your Bernardo Table Saw to Extend Its Service Life

Regular maintenance helps preserve the performance and cutting accuracy of your Bernardo circular table saw.

Several good practices are recommended:

  • Regularly remove accumulated sawdust and wood chips.

  • Check the condition and tension of drive belts when fitted.

  • Inspect accessible mechanical fasteners for tightness.

  • Keep adjustment mechanisms clean and maintain them according to the manufacturer's instructions.

  • Check the condition of fences, guides and safety devices.

  • Use a saw blade suitable for the material and the machine.

  • Ensure the dust extraction system is working correctly.

  • Check for unusual vibrations or noises.

A properly maintained machine is more likely to retain its performance and experience less premature component wear.

Why Buy Bernardo Table Saw Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we understand that a machine breakdown can quickly disrupt workshop operations.

That is why we are continuously developing our range of Bernardo machinery spare parts, helping customers maintain and repair their equipment.

By choosing Probois Machinoutils, you benefit from:

  • A dedicated category for Bernardo table saw spare parts.

  • Replacement components organised by machine model.

  • A growing selection of spare parts.

  • Assistance with identifying compatible references.

  • A specialist supplier of woodworking machinery and replacement parts.

Can't find the part you need? Send us the exact model of your Bernardo table saw along with the corresponding item number from its exploded parts diagram. We can review your request and advise you on possible availability.

Browse our selection of spare parts for Bernardo TK200, TK250, STS1300ECO, STS1600ECO and PKS250P table saws and give your machine a new lease of life.