Felt Filter bag for different dust collector 150-300 liters diameter 500 mm
Filter cartridge FP2, one of the most efficient for dust collector diameter 500 mm
Felt Filter bag for different dust collector 150-300 liters diameter 500 mm
Turbine metal blades curved to the right diameter 300 mm for dust collector
Extraction Fitting 150 mm + 3 outputs 100 mm for dust collector
Extraction Fitting 125 mm + 2 outputs 100 mm for dust collector
Plastic lower bag for dust collector Ø500 mm - Set of5 pieces
Plastic lower bag for dust collector Ø500 mm - Set of 10 pieces
Y Dust Extraction Fitting diameter 150 mm + 2 x 100 mm outlets with Blast Gate
Y Dust Extraction Fitting diameter 150 mm + 2 x 150 mm outlets with Blast Gate
Turbine outlet connection for dust collector Ø500 mm
400V motor for Holzmann ABS3880 chip vacuum cleaner
Remote control start system to be installed on vacuum cleaners of the type FM300, FM300S, FM350, AC150 and other models of all brands.
Remote control start system to be installed on vacuum cleaners of the type FM300, FM300S, FM350, AC150 and other models of all brands.
Filter cartridge Bernardo FP3, the most efficient for dust collector diameter 500 mm
Turbine metal blades curved to the left diameter 300 mm for dust collector
Discover our selection of spare parts for the Holzmann ABS3880 dust collector and extend the service life of your equipment through proper maintenance and replacement of defective components.
The Holzmann ABS3880 is designed to collect wood chips produced by woodworking machines. It can be used with jointers, thickness planers, circular saws, bandsaws and spindle moulders, provided that suitable extraction connections are installed.
Over time, certain components may wear out, become damaged or require replacement: filter bags, collection bags, impellers, motors, fittings and control accessories.
At Probois Machinoutils, we offer a range of parts for maintaining and repairing the Holzmann ABS3880. This category includes filter cartridges, filter bags, collection bags, steel impellers, a replacement three-phase motor, extraction fittings and remote-control starting systems.
Each part must be selected according to its reference and the exact version of your machine.
The Holzmann ABS3880 is a dust collector equipped with a steel impeller and a collection system comprising two bags.
It is available in both 230 V single-phase and 400 V three-phase versions.
Here are the main specifications of the machine:
Model: Holzmann ABS3880.
Motor power: 2200 W / 3 HP.
Rated airflow: 3880 m³/h.
Rotational speed: 2950 rpm.
Collection capacity: 2 × 200 litres.
Bag diameter: 500 mm.
Extraction connections: One Ø 150 mm inlet or three Ø 100 mm inlets.
Rated noise level: 89.4 dB.
Dimensions: 1150 × 730 × 2150 mm.
Weight: 53 kg.
Equipment supplied with the machine: Two felt filter bags, two plastic collection bags, two blanking caps, tools and an instruction manual.
These specifications help identify the machine and select certain consumables, particularly bags with a diameter of 500 mm.
Important: Electrical components for the 230 V and 400 V versions are not automatically interchangeable. Always check your machine's voltage before ordering a motor or control accessory.
This category includes a replacement 400 V motor for the Holzmann ABS3880 dust collector.
The motor drives the impeller and generates the airflow required to transport wood chips into the collection bags.
A defective motor may prevent the dust collector from starting or cause abnormal operation.
However, a machine that no longer starts does not necessarily have a faulty motor.
Before ordering a replacement motor, we recommend checking:
Whether the electrical supply is suitable and functioning.
The condition of the control switch.
Any electrical protection devices.
The wiring and connections.
Whether the impeller is mechanically blocked.
When should the motor be replaced?
Replacement may be necessary when a diagnosis confirms an internal failure, damaged windings or a mechanical defect that prevents normal operation.
The motor offered here is intended for the compatible 400 V version.
It must not be ordered for a 230 V single-phase ABS3880 without explicit confirmation of compatibility.
All electrical work must be carried out with the power disconnected and by a qualified person.
The impeller is one of the essential components of the extraction system.
As it rotates, it generates the airflow that transports wood chips from the woodworking machine to the collection system.
This category includes two types of 300 mm diameter steel impellers:
Impeller with blades oriented to the right.
Impeller with blades oriented to the left.
These two versions must not be considered interchangeable.
The blade orientation, dimensions and mounting system must match the original impeller.
When should the impeller be replaced?
Replacement may be necessary if the blades are broken, cracked or deformed.
Unusual vibrations, metallic noises or a mounting defect may also indicate a problem.
Before carrying out any work, switch off the dust collector, disconnect it from the power supply and wait until the impeller has stopped completely.
Then inspect the component, motor shaft and housing.
Important: Always check the blade orientation, bore, dimensions and compatibility of the impeller before ordering.
The FP2 filter cartridge with a diameter of 500 mm provides a filtration solution for compatible dust collectors.
It can replace the upper filtration system when the machine's configuration and mounting arrangement allow installation.
A suitable filter cartridge helps retain particles present in the airflow and limit their release into the workshop.
When should the filter cartridge be replaced?
Replacement may be necessary when the filter medium is torn, deformed or damaged.
Significant clogging can also reduce airflow.
Before replacing the cartridge, check the cleaning methods permitted by its manufacturer.
A diameter of 500 mm alone is not sufficient to confirm compatibility: the mounting system must also be checked.
We also offer the Bernardo FP3 filter cartridge with a diameter of 500 mm.
It provides another filtration option for dust collectors compatible with its dimensions and mounting system.
The choice between an FP2 and an FP3 cartridge must take into account the technical specifications of each product.
Two cartridges with the same diameter may differ in height, mounting arrangement or filtration performance.
Before ordering, consult the product page and check compatibility with your Holzmann ABS3880.
For work that generates fine wood dust, use a dust collection and filtration system suited to the risks present in the workshop.
The felt filter bag with a diameter of 500 mm is designed for the upper section of a compatible dust collector.
It allows air to pass through while retaining some of the particles transported by the extraction system.
A filter bag in good condition contributes to consistent machine operation.
Conversely, a torn or poorly secured bag may allow dust to escape into the working environment.
When should the filter bag be replaced?
Replacement may be necessary in the following situations:
Torn or punctured fabric.
Damaged seams.
Significant deformation.
Insufficient attachment.
Persistent clogging despite appropriate maintenance.
Check the 500 mm mounting diameter before purchasing.
Do not confuse the upper filter bag with the lower collection bag, which is used to collect wood chips.
This category also includes a Holzprofi cotton filter bag for dust collectors with a capacity of 150 to 300 litres, featuring a diameter of 500 mm.
It is intended for machines compatible with its dimensions and mounting system.
A cotton filter bag may require replacement when its fabric is torn, its seams are damaged or its mounting no longer provides a secure fit.
Before ordering, check the product specifications and list of compatible machines.
Important: A cotton or felt filter bag does not, on its own, guarantee sufficient protection against fine wood dust. Its filtration performance must be suitable for the intended application.
Collection bags are used to collect the wood chips transported by the airflow.
This category offers plastic collection bags with a diameter of 500 mm, intended for compatible dust collectors with an approximate capacity of 150 to 300 litres.
They are available in two pack sizes:
Pack of 5 collection bags.
Pack of 10 collection bags.
These packs allow you to keep replacement bags available for regular dust collector maintenance.
When should a collection bag be replaced?
Replace it when it is full, torn, punctured or can no longer be secured correctly.
A damaged bag may allow wood chips and dust to escape.
The Holzmann ABS3880 has two collection bags with a capacity of 200 litres each. Nevertheless, check the dimensions and mounting system of the replacement bags before ordering.
The 150 mm diameter branch connector with three 100 mm outlets allows an extraction system to be adapted to multiple connections.
It can be used to organise the connections between a compatible dust collector and woodworking machine extraction hoses.
Main specifications:
Inlet diameter: 150 mm.
Number of outlets: 3.
Outlet diameter: 100 mm.
Before purchasing, check the dimensions of the fittings and hoses in your installation.
Having three outlets does not guarantee that the dust collector can serve three machines simultaneously with the same performance as a single connected machine.
The available airflow depends on the extraction network configuration, hose lengths and pressure losses.
This category also includes a 125 mm diameter branch connector with two 100 mm outlets.
This accessory allows a different extraction network configuration.
It can be used when an installation requires a 125 mm inlet and two 100 mm connections.
Before ordering, measure the diameters of your installation accurately.
A 125 mm fitting must not be considered directly interchangeable with a 150 mm fitting.
The use of reducers and branch connectors can also affect extraction performance.
The branch connector with a 150 mm internal diameter and two 100 mm outlets is equipped with a sliding shut-off gate and a connector designed to attach the extraction hose to the machine.
It allows the connections within the extraction system to be organised.
The sliding gate controls the opening or closing of the airflow passage according to the accessory's design.
Main specifications:
Internal inlet diameter: 150 mm.
Number of outlets: 2.
Outlet diameter: 100 mm.
Equipment: Sliding shut-off gate.
Check hose dimensions and mounting requirements before ordering.
We also offer a branch connector with a 150 mm internal diameter and two 150 mm outlets, equipped with a sliding shut-off gate.
It provides a different connection configuration for installations using larger-diameter ducts.
Main specifications:
Internal inlet diameter: 150 mm.
Number of outlets: 2.
Outlet diameter: 150 mm.
Equipment: Sliding shut-off gate.
The choice of branch connector must take into account machine connection diameters, extraction network configuration and airflow requirements.
It is advisable to limit unsuitable fittings and unnecessary diameter changes to avoid reducing the installation's performance.
The 125 mm diameter impeller outlet connector offered in this category is intended for dust collectors compatible with its mounting system.
It connects the impeller unit to another section of the extraction system.
A cracked or poorly secured connector can cause an air leak and reduce extraction efficiency.
When should this connector be replaced?
Replacement may be necessary when it is broken, deformed or cracked, or when its mounting points are damaged.
Before ordering, always check the 125 mm diameter and mounting dimensions.
Important: The ABS3880 also has a 150 mm main extraction connection. The 125 mm impeller outlet connector must therefore not be confused with the machine's main extraction inlet.
The Holzprofi FM-RC-MONO remote-control starting system is an accessory designed for dust collectors compatible with its electrical specifications.
It allows the dust collector to be switched on remotely, which can be convenient when the machine is installed away from the workstation.
This device is offered in particular for various dust collectors in the FM300, FM300S, FM350 and AC150 series, as well as other compatible models.
Compatibility with the Holzmann ABS3880 must be checked before purchasing.
Check the voltage, permitted power rating and connection requirements.
The MONO model must not be considered suitable for a three-phase machine without explicit confirmation.
The Holzprofi FM-RC-TRI remote-control starting system provides another remote-control solution for compatible dust collectors.
It is intended for a different electrical configuration from the MONO model.
Before ordering it for a 400 V Holzmann ABS3880, always check its electrical specifications, permitted power rating and compatibility with the machine's control system.
The presence of a three-phase power supply alone is not sufficient to guarantee compatibility.
Electrical work must be carried out in accordance with the manufacturer's instructions and by a qualified person whenever necessary.
A reduction in suction performance can have several causes.
Before replacing the motor or impeller, we recommend checking the most accessible components.
Full collection bags: Excessive accumulation of wood chips can disrupt the system's operation.
Clogged filter bags: Significant clogging can restrict airflow.
Blocked filter cartridges: Saturated filters can reduce extraction airflow.
Blocked hose: Wood chips or pieces of timber may partially obstruct the extraction system.
Damaged fittings: Cracks or poorly secured connections can cause air leaks.
Incorrectly configured branch connectors: Several open branches can reduce the airflow available at each machine.
Damaged impeller: Broken or deformed blades can disrupt airflow.
Motor fault: An electrical or mechanical problem may prevent the impeller from operating normally.
A loss of suction does not necessarily mean that the motor needs replacing.
It is preferable to identify the exact cause of the problem before ordering a part.
Regular maintenance helps preserve your dust collector's performance and reduce the risk of breakdowns.
Empty the collection bags before they become excessively full.
Regularly inspect the condition of the two filter bags or the installed filter cartridges.
Clean filtration components only in accordance with their manufacturer's recommendations.
Check that extraction hoses are neither blocked nor damaged.
Inspect the fittings, branch connectors and bag retaining systems.
Pay attention to abnormal vibrations and noises coming from the impeller.
If the machine operates unusually, stop it and investigate the cause before continuing to use it.
Before any cleaning, inspection or repair, disconnect the dust collector from the power supply and wait until the impeller has stopped completely.
Work that produces fine wood dust requires a suitable dust capture and filtration system. The performance of a simple fabric bag must not be assumed sufficient without appropriate filtration specifications.
Before ordering, record the information shown on your dust collector's identification plate.
In particular, note:
Exact model: Holzmann ABS3880.
Supply voltage: 230 V or 400 V.
Serial number.
Month and year of manufacture, if available.
Component position number on the exploded parts diagram.
For an impeller, compare its dimensions, bore, mounting system and blade orientation.
For a motor, check the voltage, power rating and mounting specifications.
For a bag or filter cartridge, check the mounting diameter and dimensions.
For a fitting or branch connector, measure the inlet and outlet diameters.
For an electrical accessory, check both your installation's specifications and those of the product.
Two components that look similar may have different specifications and may not be interchangeable.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
A dust collector that develops a fault does not necessarily need to be replaced entirely.
When the defective component has been correctly identified, a targeted repair can help extend the machine's service life.
Replacing a torn filter bag, broken fitting, damaged impeller or defective motor may provide an appropriate solution.
However, the machine's overall condition and the nature of the fault must be taken into account.
Electrical work and complex mechanical repairs should be entrusted to a qualified person.
Installing an unsuitable part can cause further malfunctions, so checking part references and dimensions remains essential.
At Probois Machinoutils, we are expanding our selection of spare parts for Holzmann dust collectors to help you maintain and repair your woodworking equipment.
This category includes Ø 500 mm filter bags, FP2 and FP3 filter cartridges, plastic collection bags, Ø 300 mm steel impellers, a 400 V motor, extraction fittings, branch connectors and remote-control starting systems.
If you cannot find the part you need, please provide the exact model of your dust collector, its supply voltage, serial number and, if possible, the component's position number on the exploded parts diagram.
A photograph of the original component together with its dimensions may also help us identify the correct replacement.
Explore our range of spare parts for the Holzmann ABS3880 dust collector and check compatibility before ordering to maintain your extraction system and restore your machine to working order.
