Complete blade guard for radial miter saw Holzmann KAP305JL
Blade guard piece n° 149 for radial miter saw Holzmann KAP305JL
Blade clamping screw on radial saw Holzmann KAP305JL
Pair of carbon brushes for various radial arm saws from Kity, Scheppach, Holzmann and Parkside
Table insert for Holzmann KAP305JL radial miter saw
Engine for radial miter saw Holzmann KAP305JL
Inner flange for Holzmann KAP305JL radial miter saw
Outer flange for Holzmann KAP305JL radial miter saw
Guide for Holzmann KAP305JL radial miter saw
Guide rod for Holzmann KAP305JL radial miter saw
Right movable stop mark 20 for Holzmann KAP305JL radial miter saw
Left movable stop mark 19 for Holzmann KAP305JL radial miter saw
Switch for radial miter saw Scheppach KGZ251, Kity MS254, Woodster SL10LU² and others
Belt POLY V 559J10 for radial miter saw Scheppach HM120L, Holzmann KAP305JL, Bernardo ZKG305D
Discover our selection of spare parts for the Holzmann KAP305JL sliding mitre saw, designed for the maintenance, repair and replacement of worn or damaged components on your woodworking machine.
The Holzmann KAP305JL is a sliding mitre saw designed to perform crosscuts, mitre cuts and bevel cuts on suitable wooden workpieces within its cutting capacities.
Its sliding mechanism allows the saw head to move along its guide system, making it possible to cut wider workpieces than with a conventional mitre saw without a sliding function.
With regular use, certain components may wear out, deteriorate or become damaged.
A worn drive belt, carbon brushes reaching the end of their service life, a broken blade guard or a faulty switch can prevent the machine from operating correctly.
At Probois Machinoutils, we offer a range of replacement parts to help you repair your Holzmann KAP305JL without necessarily replacing the entire saw.
Our selection includes protective components, drive system parts, blade-mounting components, guiding elements and various operating controls.
Before ordering, it is essential to identify the required part precisely using its reference, position number in the exploded diagram and your machine's specifications.
The complete blade guard assembly for the Holzmann KAP305JL sliding mitre saw is an essential component of the machine's safety system.
It helps protect the operator against accidental contact with the blade outside the cutting area, in accordance with the saw's design.
During cutting operations, the guard must move correctly and then return to its intended protective position.
A broken, deformed or jammed guard may compromise this function.
Replacing the complete assembly may be necessary when several components of the protective system are damaged or when the required replacement part corresponds to the complete assembly offered.
Before ordering, carefully consult the product listing to check exactly which components are included.
Warning: a sliding mitre saw with a missing or defective protective device must not be used.
We also offer the blade guard, position 149, for the Holzmann KAP305JL.
This part is different from the complete blade guard assembly.
It allows you to replace the component identified as position 149 when it is damaged.
A blade guard may require replacement if it has cracks, breaks, deformation or damaged mounting points.
If the guard no longer moves correctly, the other components of its operating mechanism should also be inspected before ordering.
A malfunction may originate from an associated part rather than the guard itself.
To avoid ordering the wrong component, compare the original part with the photographs in our product listing and check its position in the exploded diagram of your KAP305JL.
The blade fixing screw for the Holzmann KAP305JL forms part of the system that secures the saw blade to its shaft.
It plays an important role in ensuring that the blade is correctly fitted.
A screw with damaged threads, a deteriorated head or signs of deformation should not be reused without inspection.
It is essential to select a screw that corresponds exactly to the original mounting arrangement.
A screw with different dimensions or specifications may prevent the blade from being secured correctly.
When replacing this component, follow the manufacturer's instructions regarding the loosening direction, assembly order and tightening procedure.
Also inspect the blade flanges and other associated components.
Never use the machine if the blade cannot be secured in accordance with the manufacturer's instructions.
The motor carbon brushes for the Holzmann KAP305JL sliding mitre saw are wear parts that contribute to the operation of the electric motor when it uses a commutator system.
They provide electrical contact with the motor commutator.
Over time, the carbon brushes gradually wear down and become shorter.
When they become excessively worn or damaged, motor operation may be affected.
Possible symptoms include:
Difficulty starting.
Intermittent operation.
Unexpected shutdowns.
Loss of power.
Abnormal sparking around the motor.
These symptoms may also have other causes, so it is important to carry out a diagnosis before ordering.
Our category includes a pair of carbon brushes compatible with various Kity, Scheppach, Holzmann and Parkside sliding mitre saws, subject to the compatibility information provided in the product listing.
When replacement is necessary, it is generally advisable to replace both carbon brushes at the same time.
Before installation, also inspect the brush holders and commutator.
The carbon brushes should be inspected when the motor becomes difficult to start or operates irregularly.
Significant wear may prevent proper electrical contact.
However, it is important to distinguish normal carbon brush wear from a more serious motor fault.
New carbon brushes will not necessarily solve the problem if the commutator is badly damaged or another electrical component is defective.
Before carrying out any work, disconnect the saw from the mains.
Electrical inspection and repair must be performed by someone with the necessary qualifications.
To order the correct pair of carbon brushes, always check the compatibility information in our product listing.
The table insert for the Holzmann KAP305JL is located around the area through which the saw blade passes.
It forms part of the sliding mitre saw's work surface.
Over time, this component may develop cutting marks, cracks or breaks.
A severely damaged table insert may compromise the correct support of certain wooden workpieces and may no longer perform its intended function.
Replacement may be necessary when:
The insert is broken.
Cracks appear.
It is deformed.
Its mounting points or seating area are damaged.
The blade opening is abnormally deteriorated.
After replacement, make sure the insert is correctly positioned and that it does not come into abnormal contact with the blade.
The replacement motor for the Holzmann KAP305JL allows you to replace the blade drive motor when it has been confirmed to be defective.
The motor provides the power required to operate the saw and transmits its movement through the drive system.
A motor fault may appear in several ways:
The saw no longer starts.
The motor runs irregularly.
The machine stops unexpectedly.
The motor overheats.
Unusual noises occur.
However, these symptoms do not prove that the motor itself needs replacing.
A faulty switch, worn carbon brushes, a damaged drive belt or a mechanical problem may produce similar symptoms.
It is therefore important to identify the actual cause of the fault before ordering a new motor.
Electrical repairs must be carried out by a qualified person.
The inner blade flange for the Holzmann KAP305JL sliding mitre saw forms part of the blade mounting and securing system.
It contributes to the correct positioning and support of the blade on the shaft.
A damaged flange may compromise proper blade installation.
The main defects to look for include deformation, cracks, damaged contact surfaces and signs of abnormal wear.
It is important to distinguish the inner flange from the outer flange, as these two components occupy different positions.
Before ordering, make sure you have identified the correct part.
The outer blade flange for the Holzmann KAP305JL completes the blade securing system.
It works together with the inner flange and the fixing screw specified by the manufacturer.
Its condition should be checked when replacing the blade or following a mechanical incident.
A deformed flange or one with a damaged contact surface may prevent the blade from being clamped correctly.
Do not use a flange from another machine based solely on its visual appearance.
Compatibility must be confirmed.
Our category offers the inner and outer flanges separately so that you can replace only the component you actually need.
The fence for the Holzmann KAP305JL allows the wooden workpiece to be positioned correctly during cutting.
It provides an essential supporting surface for accurate cuts.
A deformed, broken or incorrectly secured fence may cause the material to be positioned incorrectly.
This can make it difficult to achieve consistent cuts and hold the workpiece properly.
Before replacing the fence, inspect its overall condition and mounting components.
A loss of accuracy may also result from incorrect adjustments or another machine component.
After replacement, check the position of the fence in accordance with the manufacturer's instructions.
The guide rod for the Holzmann KAP305JL belongs to the machine's guiding system.
This component may need replacing if it is bent, broken or damaged.
However, a problem with the movement of the saw head may have several causes.
It may be related to a guiding component, a fastening element or a mechanical obstruction.
Before ordering a guide rod, identify the exact part in your machine's exploded diagram.
It is important not to confuse it with other components of the sliding mechanism.
After repair, check that the movements specified by the manufacturer operate correctly.
The right movable fence, position 20, for the Holzmann KAP305JL sliding mitre saw is one of the components used to guide and support the wooden workpiece.
It must be possible to position and secure it in accordance with the machine's intended operation.
A broken or deformed fence may compromise the support provided to the material.
Replacement may be necessary when the supporting surface is damaged or the fastening system can no longer hold it securely.
Important: the right movable fence on the KAP305JL corresponds to position 20.
Make sure you check this position number before ordering.
The left movable fence, position 19, for the Holzmann KAP305JL is the corresponding component on the left-hand side of the machine.
It contributes to the correct positioning and support of the workpiece during cutting operations.
The left and right movable fences are two different parts.
For the Holzmann KAP305JL:
Left movable fence: position 19.
Right movable fence: position 20.
It is essential to select the correct side.
Do not confuse these position numbers with those of another Holzmann mitre saw model, even if the machines look similar.
Our category also includes a switch for sliding mitre saws, whose product listing mentions various Scheppach, Kity and Woodster machines.
Before ordering it for a Holzmann KAP305JL, you must explicitly confirm that it is compatible with your machine.
Switch specifications may vary depending on the model and manufacturing version.
A similar external appearance is therefore not sufficient to establish compatibility.
If your saw has a starting problem, other electrical components that could be responsible should also be inspected.
Work on the electrical circuit must be carried out by a qualified person.
The locking lever for the Holzmann KAP305JL allows you to replace the corresponding component when it is broken, damaged or no longer performs its function correctly.
A deteriorated lever may prevent the mechanism associated with it from locking normally.
Before ordering, identify its exact position and function on your machine.
A locking problem may also originate from another component of the mechanism.
It is therefore important to inspect the associated parts to determine the actual cause of the malfunction.
After replacement, check that the device operates in accordance with the manufacturer's instructions.
The Poly-V 559J10 drive belt for the Holzmann KAP305JL is an essential component of the machine's transmission system.
It transfers movement from the motor to the blade drive mechanism.
This belt is also offered for various sliding mitre saws, including the Scheppach HM120L and Bernardo ZKG305D, according to the compatibility information provided in its product listing.
The 559J10 reference is particularly important when identifying the correct belt.
A worn belt may cause:
Unusual noises.
Slipping.
Irregular power transmission.
Loss of blade drive.
Complete belt failure.
Before replacing the belt, also inspect the condition of the pulleys and other transmission components.
A new belt may become damaged prematurely if an underlying mechanical problem remains unresolved.
Follow the manufacturer's instructions for disassembly, reassembly and belt tension.
When your Holzmann KAP305JL sliding mitre saw refuses to start, several components may be responsible.
Possible causes include an electrical supply problem, a faulty switch, worn motor carbon brushes or a motor failure.
It is important not to order a new motor immediately without first identifying the cause.
The carbon brushes are one component to inspect when the motor operates intermittently or no longer starts.
The switch and other electrical components should also be checked by a competent person.
If the motor runs but the blade is no longer driven correctly, the transmission system and Poly-V 559J10 belt should be examined.
An accurate diagnosis helps avoid replacing components that are still in working order.
Before ordering a replacement component, identify your machine precisely.
We recommend recording the following information:
Brand: Holzmann.
Exact model: KAP305JL.
Serial number.
Manufacturing month and year.
Supply voltage.
Part position number in the exploded diagram.
Original part reference, if known.
Certain components may differ depending on the model or manufacturing period.
Parts for the Holzmann KAP305JL must therefore not be assumed to be interchangeable with those for the KAP305ECO or another sliding mitre saw.
Also check the specific position numbers of the movable fences: 19 for the left-hand side and 20 for the right-hand side.
IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the relevant spare part product page. Where necessary, also check the manufacturing month, manufacturing year and serial number of your machine.
A visual resemblance does not guarantee that a component is compatible.
Regular maintenance helps detect early signs of wear and preserve the operation of your sliding mitre saw.
Before carrying out any maintenance, disconnect the machine from the mains and wait until the blade has come to a complete stop.
Check the blade guard regularly and make sure it moves freely.
Inspect the supporting surfaces of the fence and movable fences.
Also check the condition of the table insert, blade flanges and clamping components.
The transmission system requires particular attention so that any belt wear can be detected.
If the motor becomes difficult to start, the carbon brushes may need to be inspected.
Clean the machine regularly and ensure that the dust extraction system is working correctly.
A machine with a defect that could compromise safety must be repaired before it is used again.
A fault affecting a single component does not necessarily require purchasing a new sliding mitre saw.
Replacing a belt, a pair of carbon brushes, a blade guard, a movable fence or another component may allow the machine to be restored to working order when the repair is technically appropriate.
Our selection of spare parts for the Holzmann KAP305JL helps you find the component corresponding to your fault.
However, it remains essential to carry out a diagnosis before ordering.
A starting problem is not necessarily caused by the motor.
A loss of blade drive may originate from the belt.
A loss of cutting accuracy may be related to the fence, movable fences or machine adjustments.
Identifying the actual cause of the malfunction allows you to select the correct part and avoid unnecessary purchases.
At Probois Machinoutils, we offer a selection of replacement parts to maintain and repair your Holzmann KAP305JL sliding mitre saw.
Discover the following components in this category:
Complete blade guard assembly.
Blade guard, position 149.
Blade fixing screw.
Pair of motor carbon brushes.
Table insert.
Replacement motor.
Inner blade flange.
Outer blade flange.
Fence.
Guide rod.
Right movable fence, position 20.
Left movable fence, position 19.
Switch, subject to confirmed compatibility.
Locking lever.
Poly-V 559J10 drive belt.
Looking for another part for your KAP305JL?
Send us the exact model, serial number, manufacturing date and, if possible, the position number of the required part in the exploded diagram to help us identify it.
Probois Machinoutils: your specialist in Holzmann sliding mitre saw spare parts, helping you maintain, repair and extend the service life of your woodworking machines.
