Blade guard 3901338004 for Parkside PTKS 2200 A1 circular saw
Blade guard part number 3901338004 for Parkside PTKS 2200 A1 table saw
Blade guard part number 3901338004 for Parkside PTKS 2200 A1 table saw
Are you looking for a spare part for your Parkside PTKS 2200 A1 table saw to replace a damaged component or restore your machine to proper working condition? At Probois Machinoutils, we offer replacement parts for the maintenance and repair of woodworking machinery, including Parkside circular table saws.
The Parkside PTKS 2200 A1 is a circular table saw designed for various woodworking applications. It allows users to perform rip cuts and crosscuts on wooden workpieces and panels suitable for the machine's cutting capacity.
Like any machine equipped with a circular blade rotating at high speed, it requires properly installed safety devices in good condition to reduce the risks associated with sawing operations.
Our current selection includes a replacement blade guard for the Parkside PTKS 2200 A1 table saw, reference 3901338004. This component is intended to replace the original guard when it is broken, cracked, distorted or no longer suitable for use.
Replacing a damaged component instead of the entire machine is a practical solution when repair is technically possible and helps restore the equipment to a configuration that meets the manufacturer's requirements.
The replacement blade guard reference 3901338004 is offered for the Parkside PTKS 2200 A1 circular table saw.
The blade guard is one of the safety components of a circular saw. It helps limit accidental access to the cutting area and reduces certain risks associated with a rotating saw blade.
On a table saw, the blade extends above the worktable to cut wood. This configuration requires particular care and the use of the protective devices specified by the manufacturer.
The guard must be suitable for the machine model and installed according to the assembly instructions. Its shape, dimensions and mounting system are essential to ensure correct positioning.
Replacing the original guard with a compatible component helps preserve the intended safety configuration, provided that it is correctly installed and the other protective devices remain in good condition.
The blade guard on a Parkside table saw helps protect the operator against certain accidental contacts with the blade during cutting operations.
It is an important part of the machine's safety equipment and must be used in accordance with the manufacturer's instructions.
Depending on the saw's design, the guard may also help reduce the direct projection of certain debris from the cutting area.
Its effectiveness depends on its condition, positioning and the presence of the other safety devices provided on the machine.
However, it does not replace essential safety precautions when sawing: using a push stick when required, properly supporting wooden workpieces, selecting a suitable blade and following the manufacturer's safety instructions.
The blade guard should always be inspected before starting the saw to ensure that it is free from damage that could affect its operation.
The blade guard for Parkside PTKS 2200 A1 may need replacing following an impact, improper handling or gradual deterioration.
Several warning signs should be taken seriously:
A damaged blade guard should not be repaired using improvised methods such as glue, additional screws or structural modifications.
Such alterations may change its characteristics and compromise its operation.
When the guard is damaged, the appropriate solution is to replace it with a component compatible with the machine.
A circular table saw uses a blade rotating at high speed. Contact with this blade can cause serious injuries.
Safety devices are designed to help reduce the risks associated with operating the machine.
A broken, incorrectly secured or missing guard may expose the operator to additional hazards around the cutting area.
A distorted or incorrectly positioned guard may also interfere with the movement of wooden workpieces.
It is therefore essential not to operate the saw when a required protective device is damaged or incorrectly installed.
Before resuming work, inspect the condition of the guard, its mounting points and the other safety equipment.
Replacing a blade guard does not remove the need to follow the manufacturer's instructions regarding cutting operations, blade adjustment and the use of safety accessories.
To order a replacement blade guard for the Parkside PTKS 2200 A1 table saw, it is essential to check the exact model of your machine.
The replacement part offered in this category is reference 3901338004.
Before placing an order, we recommend checking several details:
These checks help reduce ordering errors and ensure that the selected component corresponds to your saw.
A part that looks similar is not necessarily interchangeable with the original blade guard.
Parkside offers different versions of circular table saws, including the PTKS 2200 A1, PTKS 2000 H5, PTKS 2000 F4 and PTK 2000 A1 models.
Although these machines belong to a similar category of woodworking equipment, they do not necessarily use the same components.
Worktable dimensions, mounting systems, adjustment mechanisms and protective devices may vary from one version to another.
You should therefore never assume that a blade guard designed for a Parkside PTKS 2000 H5 will also fit a PTKS 2200 A1.
The part reference and compatibility information must always be checked individually.
At Probois Machinoutils, spare parts are organised by machine model to make searching easier and help avoid confusion between different versions.
Replacing a circular table saw blade guard must be carried out carefully and in accordance with the manufacturer's instructions.
Before starting any work, completely disconnect the machine from the electrical supply and wait until the blade has stopped rotating.
Inspect the guard's mounting system and check that the attachment components are in good condition.
The new guard must be installed in its intended position without modifying the mounting points or making improvised adaptations.
After installation, check that the guard is stable, that it can move freely where movement is required by the manufacturer, and that it does not come into contact with the blade.
It is also necessary to ensure that all other safety devices are correctly installed.
If installation is difficult or a mounting component appears damaged, the machine should be inspected by a competent person before being returned to service.
The blade guard is not the only component contributing to the safety of a circular table saw.
The riving knife is another important safety device. It is positioned behind the blade and helps reduce the risk of the wood pinching the blade during certain cutting operations.
The rip fence helps guide workpieces during longitudinal cuts, while the mitre gauge assists with certain crosscutting operations.
These accessories perform different functions and must not be considered interchangeable.
Correct operation of the saw depends on the presence, condition and adjustment of the equipment specified by the manufacturer.
Safety devices must never be removed or modified simply to make a cutting operation easier.
Regular maintenance helps preserve the performance of your Parkside PTKS 2200 A1 circular table saw and reduces the risk of component damage.
Before each use, inspect the condition of the blade, blade guard and other safety devices.
Also check the machine's stability, the secure attachment of accessories and the operation of the adjustment mechanisms.
After working, disconnect the saw from the power supply and wait until the blade has stopped completely before cleaning accessible areas.
Regularly remove sawdust and wood dust according to the manufacturer's instructions.
Using a suitable dust extraction system helps reduce dust accumulation around the working area.
A properly maintained blade suitable for the material being cut also helps reduce unnecessary strain on the motor.
Avoid forcing wooden workpieces excessively during sawing and respect the machine's cutting capacity.
Finally, any mechanical or electrical fault should be investigated before work continues.
At Probois Machinoutils, we specialise in woodworking machinery, accessories and spare parts for maintaining and repairing workshop equipment.
Our catalogue includes replacement parts for various Parkside, Scheppach, Kity and other machines used by DIY enthusiasts and professionals.
We organise our spare parts categories by machine type and model to make identifying the required components easier.
Part reference 3901338004 is offered in this category as a replacement blade guard for the Parkside PTKS 2200 A1.
Repairing a machine when technically possible helps extend its service life and avoid prematurely replacing equipment that can still be used.
If the blade guard on your circular table saw is broken, cracked, distorted or missing, discover our replacement blade guard reference 3901338004 for Parkside PTKS 2200 A1.
This spare part is intended to replace the corresponding component on the specified machine, subject to confirming compatibility with your version.
Before ordering, check the exact model of your saw and compare the guard reference with that of the original component.
Probois Machinoutils helps you maintain and repair your Parkside table saw with a selection of spare parts suited to the different machines in your workshop.