Spare parts for the Holzmann HBS245HQ bandsaw: maintain and repair your machine

Discover our selection of spare parts for the Holzmann HBS245HQ bandsaw, designed for the maintenance, troubleshooting and repair of your woodworking machine.

The Holzmann HBS245HQ is a compact bandsaw designed for various woodworking operations. It can be used for straight and curved cuts with a blade suited to the material and the machine's technical capacities.

Its operation relies on several mechanical and electrical assemblies: the motor, transmission system, wheels, rubber tyres, blade guides and control devices.

After many hours of use, certain components may wear out or develop faults. A deteriorated drive belt, damaged wheel tyre or worn guide bearing can interfere with the normal operation of the bandsaw.

At Probois Machinoutils, we offer a range of replacement parts that allow you to replace defective components without necessarily having to purchase an entirely new machine.

Our category includes wheel tyres, a drive belt, guide bearings, a lower blade guide, cutting guides, switches, a capacitor, a motor and several adjustment components.

Each part performs a specific function. It is therefore essential to identify the source of the problem correctly before ordering.

Which Holzmann HBS245HQ spare parts are available in this category?

Our selection includes the following parts:

• Guide bearing assembly for Holzmann HBS245HQ bandsaw.

• Table insert for Holzmann HBS245HQ bandsaw.

• Black rubber wheel tyre for Holzmann HBS245HQ.

• Lower blade guide for bandsaw.

• Drive belt for Holzmann HBS245HQ and Bernardo HBS260 bandsaws.

• 12 µF wired capacitor.

• Complete rip fence for bandsaw.

• Mitre gauge for bandsaw.

• Replacement motor for bandsaw.

• Switch for Holzmann HBS245HQ bandsaw.

• Bandsaw light switch.

• Blade tension adjustment knob for bandsaw.

• Guide locking lever for Holzmann HBS245HQ.

These components allow you to work on different parts of the machine, including blade drive, guidance, cutting adjustments, motorisation and electrical controls.

For parts whose descriptions refer to several bandsaw models, always check the exact compatibility information on the individual product page.

Rubber wheel tyre for the Holzmann HBS245HQ

The black rubber wheel tyre for the Holzmann HBS245HQ bandsaw is fitted around the circumference of the wheel.

It forms the contact surface between the wheel and the bandsaw blade.

Its purpose is to contribute to proper blade drive and smooth blade movement, together with correct blade tension and wheel adjustment.

The rubber tyre also prevents direct contact between the blade and the metal surface of the wheel.

Over time, the rubber may deteriorate, crack, harden or begin to detach.

A damaged tyre can interfere with blade tracking and contribute to vibrations or irregular operation.

Replacement may be necessary when its surface shows significant deformation, cracking or separation from the wheel.

Please note that a blade coming off the wheels does not automatically mean that the tyre is defective. Incorrect blade tracking, unsuitable blade tension or a mechanical problem can produce similar symptoms.

Before ordering, check the tyre reference and compatibility information.

Drive belt for Holzmann HBS245HQ and Bernardo HBS260

The drive belt for the Holzmann HBS245HQ and Bernardo HBS260 bandsaws is part of the machine's transmission system.

It transfers movement between the mechanical components specified by the manufacturer.

A drive belt in good condition contributes to smooth transmission operation.

Over the years and after many hours of use, it may wear, crack, stretch or break.

Several signs may indicate that replacement is necessary:

• Cracked drive belt.

• Torn or broken belt.

• Significant surface wear.

• Irregular transmission.

• Abnormal slipping, where applicable to the transmission system.

Before replacing the belt, it is advisable to inspect the pulleys and other transmission components to identify any possible cause of premature wear.

The belt offered is also listed for the Bernardo HBS260. This compatibility must not automatically be extended to other Bernardo or Holzmann models.

Guide bearing assembly and lower blade guide for Holzmann HBS245HQ

The guide bearings and blade guidance components play an essential role in keeping the blade correctly positioned during cutting.

They help limit unwanted blade movement and maintain suitable guidance for the work being performed.

Our category includes a guide bearing assembly for the Holzmann HBS245HQ and a lower blade guide.

Guide bearings can wear over time, particularly around their contact surfaces or internal bearings.

A guide bearing that does not rotate freely, has excessive play or produces unusual noise should be inspected.

Incorrectly adjusted guides can also cause premature blade wear or affect cutting quality.

Before replacing a guide assembly, inspect its mechanical condition and make sure that the problem is not simply caused by incorrect adjustment.

After any intervention, the guides must be adjusted according to the manufacturer's instructions.

Your bandsaw cuts off line: should you replace the guide bearings?

A cut that drifts to one side can have several causes.

Worn or incorrectly adjusted guide bearings may contribute to the problem, but they are not necessarily responsible.

You should also check:

• The condition and sharpness of the blade.

• The quality and alignment of its weld.

• Blade tension.

• Upper and lower blade guide adjustment.

• Blade positioning on the wheels.

• Whether the blade is suitable for the wood being cut.

A blunt blade or one with an uneven tooth set may cause the cut to drift sideways.

Similarly, guides positioned too far from the blade can allow excessive movement during cutting.

Replacing the guide bearings will therefore not automatically correct an inaccurate cut.

A complete diagnosis helps determine whether the fault originates from the blade, the guides or another component.

Table insert for Holzmann HBS245HQ bandsaw

The table insert, also known as a throat plate, is positioned around the blade opening in the bandsaw table.

It helps reduce the opening around the blade and provides a suitable support surface for wooden workpieces.

A table insert may become damaged following contact with the blade, incorrect adjustment or mechanical deterioration.

Replacement may be necessary when it is broken, heavily cut or no longer remains securely in place.

A damaged insert may interfere with the support of small workpieces or leave an excessively large opening around the blade.

Before installing a new insert, check that the blade is correctly positioned and that no adjustment problem could cause further contact.

The table insert must match the dimensions and mounting arrangement specified for the Holzmann HBS245HQ.

Rip fence and mitre gauge for bandsaw

The rip fence is used to guide a wooden workpiece during longitudinal cuts.

It provides a reference for maintaining a set distance between the blade and the edge of the workpiece.

A correctly positioned rip fence makes repetitive cutting easier and contributes to consistent results.

Our category includes a complete rip fence for bandsaws.

We also offer a mitre gauge, designed for operations requiring the workpiece to be positioned at a particular angle.

These accessories may need replacing if they are broken, bent or their locking mechanisms no longer function correctly.

Before ordering, check the dimensions, mounting system and compatibility information provided on each product page.

A guide designed for another bandsaw must not be considered compatible simply because it looks similar.

Replacement motor for Holzmann HBS245HQ bandsaw

The motor is the main component of the bandsaw's drive system.

It provides the mechanical power required to drive the blade through the transmission system specified by the manufacturer.

Our category includes a replacement motor for bandsaws.

Replacement may be considered when an internal motor fault has been confirmed and repair is not appropriate.

However, a bandsaw that no longer starts does not necessarily have a defective motor.

The problem may also originate from the electrical supply, switch, capacitor or a safety device.

It is therefore essential to carry out a diagnosis before ordering a complete motor.

Also check that the electrical specifications, dimensions and mounting points correspond exactly to those of your Holzmann HBS245HQ.

External resemblance alone is not sufficient to confirm motor compatibility.

12 µF capacitor: a component to check when the motor has starting problems

Our selection includes a 12 µF wired capacitor, intended for compatible machines according to the information provided on its product page.

A capacitor performs a function in the electrical operation of the motor with which it is associated.

When defective, it may cause starting difficulties or prevent the motor from starting correctly.

Several symptoms may justify checking it:

• The motor no longer starts.

• The motor hums but does not start.

• Starting becomes difficult.

• The capacitor shows visible deformation or damage.

However, these symptoms do not prove that the capacitor is responsible.

A defective switch, an electrical supply problem or an internal motor fault can produce similar symptoms.

Important: a capacitance of 12 µF alone is not sufficient to select a replacement capacitor. Its function, rated voltage, electrical characteristics and connection system must also be checked.

A capacitor may retain an electrical charge after the machine has been disconnected. Inspection and replacement should be carried out by a competent person.

Main switch and light switch for Holzmann HBS245HQ

Switches control the electrical functions of the machine.

Our category includes a switch for the Holzmann HBS245HQ bandsaw and a bandsaw light switch.

The main switch controls the operation of the bandsaw in accordance with its design.

The light switch controls the lighting when the machine is equipped with this feature.

A switch may require replacement when its mechanism is broken, it no longer operates correctly or an electrical fault has been confirmed.

It is important to distinguish between these two components: a light switch cannot replace the machine's main switch.

Before ordering, check the electrical ratings, number of connections, dimensions and model compatibility.

Never modify the machine's controls or safety devices to accommodate an unsuitable switch.

Blade tension adjustment knob and guide locking lever

Blade tension and guide positioning are essential adjustments on a bandsaw.

Our category includes a blade tension adjustment knob and a guide locking lever for the Holzmann HBS245HQ.

The tension adjustment knob operates the mechanism used to adjust blade tension.

A broken knob or damaged mounting may prevent this adjustment from being carried out correctly.

The locking lever is used to secure the relevant guide in the selected position.

If it is broken, bent or no longer provides adequate clamping, replacement may be necessary.

Before ordering, check that the problem actually originates from the knob or lever rather than the mechanism it operates.

After replacement, carry out the adjustments according to the machine's instruction manual.

How to identify the correct spare part for your Holzmann HBS245HQ

Before ordering a replacement part, identify your bandsaw precisely.

We recommend recording the following information:

• Brand: Holzmann.

• Exact model: HBS245HQ.

• Serial number.

• Manufacturing month and year.

• Original part reference, if known.

• Position number on the exploded diagram, where available.

It is particularly important to verify the compatibility of motors, capacitors, switches and mechanical components.

The Holzmann HBS230HQ, HBS245HQ, HBS250 and HBS261 bandsaws are different models.

Their components must not be considered interchangeable without verification.

IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part product page. Where necessary, also check your machine's manufacturing month, manufacturing year and serial number.

Visual resemblance alone does not guarantee that a replacement part is compatible.

How to maintain your Holzmann HBS245HQ bandsaw

Regular maintenance helps preserve the correct operation of your bandsaw and detect early signs of wear.

Before carrying out any work, disconnect the machine from the mains and wait until the blade has stopped completely.

Periodically inspect the wheel tyres and check that they do not show cracks or signs of separation.

Also examine the drive belt and accessible transmission components in accordance with the manufacturer's instructions.

Check the condition of the guide bearings and blade guides.

Inspect blade tension and its position on the wheels.

Make sure that the rip fence and mitre gauge are correctly secured before starting a cut.

Regularly remove sawdust accumulations from accessible areas without damaging electrical or mechanical components.

A properly maintained machine makes it easier to identify an abnormality before it develops into a more serious breakdown.

Check the safety devices before returning the machine to service

After replacing a part, check that all covers and protective devices have been correctly refitted.

Check the blade's position and make sure that it is not damaged.

Verify that the control and safety devices are functioning correctly.

Never operate the bandsaw with an open cover or a disabled safety device.

If you notice abnormal vibrations, unusual noise or incorrect blade movement, stop the machine immediately.

Electrical work must be carried out by a competent person.

The machine must only be returned to service when its operation complies with the manufacturer's instructions.

Repair your Holzmann HBS245HQ instead of replacing the entire machine

A localised fault does not necessarily require purchasing a new bandsaw.

When a wheel tyre, drive belt, guide bearing, switch or another component has been confirmed as defective, replacing that part may restore normal operation.

This approach helps extend the service life of your equipment.

However, confirming the cause of the fault remains essential.

A blade that drifts does not necessarily require new guide bearings.

A motor that no longer starts should not be replaced before the other relevant electrical components have been checked.

An effective repair depends on an accurate diagnosis and the selection of a fully compatible replacement part.

Order your Holzmann HBS245HQ spare parts from Probois Machinoutils

At Probois Machinoutils, discover a selection of spare parts for the maintenance and repair of your Holzmann HBS245HQ bandsaw.

Wheel tyres, drive belt, guide bearings, lower blade guide, table insert, cutting guides, motor, capacitor, switches and adjustment components: our range allows you to work on different parts of your machine.

Looking for another spare part for your Holzmann bandsaw?

Send us the exact model, serial number, manufacturing date and, if possible, the position number of the required part on the exploded diagram to help us identify it.

Probois Machinoutils: your specialist in spare parts for Holzmann woodworking machines, helping you maintain, repair and extend the service life of your HBS245HQ bandsaw.