Zipper ZI-COM50SI Air Compressor Parts

Zipper ZI-COM50SI Air Compressor Parts - Probois Machinoutils

Active filters

Spare Parts for Zipper ZI-COM50SI Air Compressor: Maintenance and Repair of Your Machine

The Zipper ZI-COM50SI air compressor is a quiet, oil-free air compressor featuring a 50-litre air tank and two compression units. Designed for workshop applications, it can supply various pneumatic accessories compatible with its performance, carry out inflation tasks and clean surfaces using an air blow gun.

Despite its robust construction and oil-free operation, certain components may wear out, become clogged or deteriorate over time. Air leaks, pressure loss, regulation problems or unusually slow tank filling may require inspection of several parts of the pneumatic system.

At Probois Machinoutils, we offer a selection of spare parts for the Zipper ZI-COM50SI air compressor to make maintenance and repairs easier.

In this category, you will find various replacement components, including air filters, pressure regulators, pressure gauges, check valves and specific air pipes designed for the ZI-COM50SI model.

Air Filter for Zipper ZI-COM50SI Compressor: Protecting the Compression Units

The air filter for the Zipper ZI-COM50SI compressor plays an essential role in protecting the compression units. It helps prevent dust and airborne impurities from entering the compression mechanism.

When the compressor is used in a garage, woodworking workshop or dusty environment, the filter can gradually become clogged. This accumulation of particles may restrict airflow and affect the machine's performance.

A heavily obstructed filter can cause slower tank filling or reduced compressor efficiency.

For this model, we offer the Zipper air filter reference ZI-10015536, compatible with the Zipper ZI-COM50SI and ZI-COM24SI air compressors.

It is recommended to inspect the condition of the air filters regularly and replace them when they become damaged, heavily clogged or can no longer provide adequate airflow after maintenance.

The compressor must not be operated without the air filtration components specified by the manufacturer, as airborne particles could damage internal components.

Pressure Regulator for Zipper ZI-COM50SI Air Compressor

The pressure regulator for the Zipper ZI-COM50SI air compressor allows the operator to adjust the compressed air outlet pressure according to the requirements of the pneumatic accessory being used.

Different air tools require different operating pressures. Tyre inflation guns, air blow guns and pneumatic staplers must be operated according to the specifications provided by their manufacturers.

The pressure regulator helps adapt the available outlet pressure to the intended application, within the operating limits of the compressor.

If the regulator becomes difficult to adjust, no longer maintains the selected pressure correctly or develops an air leak, its condition should be checked and replacement may be necessary.

Our catalogue includes a pressure regulator for the Zipper ZI-COM50SI compressor, also suitable for other models in the Zipper range, including the ZI-COM24E, ZI-COM24SI and ZI-COM50E.

Before ordering, it is important to check your machine's configuration and the specifications of the original pressure regulator.

Pressure Gauge for Zipper ZI-COM50SI Compressor: Monitoring Air Pressure

The pressure gauge for the Zipper ZI-COM50SI air compressor allows the operator to visually monitor the pressure in the pneumatic system.

This compressor is equipped with two pressure gauges, used to monitor the pressure inside the air tank and the regulated working pressure supplied to pneumatic accessories.

These readings are important for operating the compressor correctly and checking its behaviour during tank filling or compressed air consumption.

A pressure gauge may need replacing if its needle becomes stuck, its dial is no longer readable or its readings are clearly inconsistent.

An air leak around the gauge connection may also require inspection.

We offer a 50 mm pressure gauge for the Zipper ZI-COM50SI compressor, also compatible with several Zipper models in the COM24 and COM50 ranges.

Before replacing a pressure gauge, always check its diameter, connection type and pressure measurement range.

Check Valve for Zipper ZI-COM50SI Air Compressor: Preventing Air Backflow

The check valve for the Zipper ZI-COM50SI compressor is an important component of the compressed air circuit.

Its purpose is to prevent compressed air from flowing backwards when the compression units stop operating.

This function helps maintain pressure inside the tank and contributes to the correct operation of the pneumatic system.

A faulty check valve may be associated with several symptoms, including:

  • Persistent air leakage after the compressor stops.
  • Unusual pressure loss.
  • Difficulty restarting the compressor.
  • Abnormal operation of the pneumatic system.

However, these symptoms do not necessarily mean that the check valve is defective. Leaks from fittings, pipes or other components can produce similar problems.

A proper diagnosis is therefore essential before ordering a replacement part.

Probois Machinoutils offers a check valve compatible with the Zipper ZI-COM50SI and ZI-COM24SI air compressors.

Before carrying out any work on this component, the compressor must be disconnected from the power supply and the air tank must be completely depressurised, in accordance with the manufacturer's safety instructions.

280 mm Air Pipe for Zipper ZI-COM50SI Compressor: Part No. 33

The pneumatic system of the Zipper ZI-COM50SI compressor includes several pipes that allow compressed air to circulate between the different components.

These pipes must withstand the compressor's normal operating conditions and maintain an airtight seal at their connections.

Our selection of spare parts includes the 280 mm air pipe for the Zipper ZI-COM50SI compressor, identified as item 33 in the manufacturer's exploded parts diagram.

This component may require replacement if it develops cracks, deformation, air leaks or damage around its connections.

A damaged air pipe can cause compressed air loss and may force the compression units to operate for longer periods to maintain the required pressure.

It is important to check the exact reference and position of the pipe in the technical documentation. Two pipes of similar length are not necessarily interchangeable if their shape or connections differ.

Aluminium Air Pipe for Zipper ZI-COM50SI Compressor: Part No. 38

The aluminium air pipe for the Zipper ZI-COM50SI compressor is another component of the machine's pneumatic circuit.

This metal pipe is identified as item 38 in the manufacturer's exploded parts diagram.

It allows compressed air to circulate between the components to which it is connected.

Over time, an air pipe may be subjected to mechanical stress, become deformed or develop leaks around its fittings.

If an aluminium pipe becomes cracked, crushed or otherwise damaged, replacement with a suitable component may be necessary.

Attempting to modify or straighten a pipe designed to carry compressed air is not recommended unless the manufacturer's instructions specifically permit it.

Before ordering, check that the required component corresponds to item 38 for the Zipper ZI-COM50SI compressor.

Why Is My Zipper ZI-COM50SI Air Compressor Not Building Pressure?

A Zipper ZI-COM50SI air compressor that no longer builds pressure correctly may be experiencing several different types of malfunction.

Before replacing any component, it is important to identify the cause of the problem.

Possible causes include:

  • Clogged air filter: restricted air intake may slow down tank filling.
  • Leaking air fitting: part of the compressed air escapes from the system.
  • Damaged pneumatic pipe: cracks or defective seals prevent the system from maintaining pressure.
  • Faulty check valve: compressed air may flow backwards through the pneumatic circuit.
  • Incorrectly closed drain valve: compressed air gradually escapes from the tank.
  • Malfunctioning compression unit: compressed air production may become insufficient.

As the ZI-COM50SI is equipped with two oil-free compression units, reduced performance may also require checking the operation of each unit individually.

It is also important to distinguish an actual compression fault from excessive compressed air consumption by the connected tool.

A pneumatic accessory requiring more airflow than the compressor can deliver may cause the working pressure to drop during use, even when the compressor is operating normally.

Quiet Zipper ZI-COM50SI Air Compressor: What Maintenance Is Required?

The Zipper ZI-COM50SI belongs to the manufacturer's range of quiet, oil-free air compressors.

Unlike conventional oil-lubricated compressors, its compression units do not require oil changes. However, this does not mean that the machine is maintenance-free.

To maintain performance and reduce the risk of breakdowns, several checks are recommended:

  • Regularly inspect the condition of the air filters.
  • Keep ventilation openings clean and unobstructed.
  • Check pneumatic pipes and fittings for air leaks.
  • Monitor the pressure gauge readings.
  • Check that the pressure regulator operates correctly.
  • Regularly drain condensation from the air tank.
  • Follow the operating and cooling periods specified in the instruction manual.
  • Watch for unusual noises or vibrations.

Draining the air tank is particularly important. During compression, moisture contained in the air can condense and accumulate at the bottom of the tank.

Regularly removing this water, according to the manufacturer's instructions, helps reduce the risk of internal corrosion.

Never attempt to weld, drill or modify a compressed air tank.

How to Identify the Correct Spare Part for Your Zipper ZI-COM50SI Compressor

To order a spare part compatible with your Zipper ZI-COM50SI air compressor, it is essential to check the information on the machine's identification plate and in its technical documentation.

The model reference is the first step in identifying the correct component, but it may not always be sufficient to guarantee compatibility.

Some parts may have been modified depending on the manufacturing period or the compressor's serial number.

We recommend the following checks:

  • Confirm that your compressor is identified as model ZI-COM50SI.
  • Record the serial number shown on the identification plate.
  • Consult the instruction manual and exploded parts diagram corresponding to your machine.
  • Identify the component to be replaced and its item number.
  • Compare the dimensions, shape and connections of the original part.
  • Check the compatibility information provided in the product description before ordering.

This procedure is particularly important for air pipes, fittings, electrical components and parts belonging to the compression units.

BEFORE PURCHASING, PLEASE CHECK THAT THE SPARE PART IS COMPATIBLE WITH YOUR MACHINE. Differences may exist depending on the month or year of manufacture and the compressor's serial number.

Are Zipper ZI-COM50SI Spare Parts Compatible with the ZI-COM24SI?

The Zipper ZI-COM50SI and ZI-COM24SI compressors both belong to the manufacturer's range of quiet, oil-free air compressors.

Although their air tank capacities differ, certain components may be shared between the two models.

This is particularly the case for the Zipper air filter reference ZI-10015536 and the check valve offered for both compressors.

Other components, including certain pressure regulators and pressure gauges, may also be compatible with several Zipper compressors in the COM24 and COM50 ranges, depending on their exact reference.

However, this compatibility must not be assumed for every spare part.

Air pipes, mounting components, electrical parts and certain internal components may differ between models.

It is therefore essential to consult the compatibility information provided for each product.

Repair Your Zipper ZI-COM50SI Compressor with the Correct Replacement Part

When an air compressor develops a fault, replacing the entire machine is not always necessary.

If the malfunction is caused by an identifiable and replaceable component, purchasing a spare part for the Zipper ZI-COM50SI air compressor can be a cost-effective solution.

Replacing a clogged air filter, leaking pipe, defective pressure gauge or damaged check valve may restore normal operation when the diagnosis confirms that the component is responsible for the problem.

This approach helps extend the service life of the equipment while avoiding premature replacement of a compressor whose other components remain in good condition.

For any work involving electrical components, safety devices or the pressurised air tank, we recommend consulting a qualified professional.

Probois Machinoutils: Your Specialist in Zipper ZI-COM50SI Air Compressor Spare Parts

At Probois Machinoutils, we offer spare parts for the maintenance and repair of numerous workshop machines, including Zipper air compressors.

This category is specifically dedicated to the Zipper ZI-COM50SI 50-litre quiet oil-free air compressor.

Here you can find various replacement components for maintaining or repairing your machine, including air filters, pressure regulators, pressure gauges, check valves, 280 mm air pipes and aluminium air pipes.

If you are looking for a component that is not listed in our catalogue, you can provide us with the exact model of your compressor, its serial number and, if possible, the item number shown in the exploded parts diagram.

This information will help us identify the required component and check whether it can be supplied.

Explore our selection of spare parts for the Zipper ZI-COM50SI air compressor and find suitable replacement components to maintain, repair and extend the service life of your quiet air compressor.