Outer flange for circular saw Scheppach HS105 and others
Inner flange for circular saw Scheppach HS105 and others
Light plate for Scheppach HS100s and ST10S table saws
Switch reference 5901220018 for radial miter saw Scheppach HM110MP and Dexter DX254 or DX254TS
Press for radial miter saw Scheppach HM90MP, HM110MP and Dexter DX216, DX254 and DX254TS
Complete blade axle with pinion mark 70 and 73 to 77 for radial miter saw Scheppach HM110MP and Dexter DX254, DX254TS
Arming handle reference 5901220003 and marks 40-42-43 for Scheppach HM110MP and Dexter DX254 radial miter saw
Upper handle reference 5901220019 item 133 for Scheppach and Dexter radial miter saw
Lower handle reference 5901220015 mark 120 for Scheppach and Dexter radial miter saw
Bevel pinion diameter 31,5x10 mm n° 53 for circular saw on table Scheppach, Redstone, Toolson, Dexter
Segment for circular saw Scheppach HS105 and others
Armature 5901220007 for radial miter saw Scheppach HM110MP and Dexter DX254
Table insert for table saw Parkside PTKS 2000 F4
Guide rod support reference 5901220023 item 49-53 for Scheppach and Dexter radial miter saw
Stator 5901220008 for radial miter saw Scheppach HM110MP and Dexter DX254
Suction outlet housing for Scheppach, Redstone et Dexter table saw (part 66 on the exploded view)
Saw blade guard for Scheppach, Redstone et Dexter table saw until 09/2019 (part 132 on the exploded view)
Saw blade guard for Scheppach, Redstone et Dexter table saw from 10/2019 (part 249-258 on the exploded view)
Clamping lever for Scheppach, Redstone et Dexter table saw (part 44 on the exploded view)
Riving knife 5901308082 for Scheppach table saw (from 10/2019)
Are you looking for a spare part for your Dexter DX254TS table saw to repair your machine, replace a damaged component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of Dexter circular saws, a brand notably distributed through Leroy Merlin stores.
The Dexter DX254TS table saw is designed for various woodworking operations involving timber and wood-based panels. It can be used for rip cuts and crosscuts, provided that the machine's cutting capacities and the manufacturer's recommendations are respected.
Over time, certain mechanical components may become worn, deformed or broken. Safety devices, adjustment mechanisms and electrical components may also require inspection or replacement.
Our catalogue includes several spare parts for Dexter DX254TS table saws, including blade flanges, bevel gears, gear segments, blade guards, riving knives, clamping levers and dust extraction components.
Some references are also used on Scheppach, Redstone, Toolson or other machines. However, compatibility must always be checked individually before ordering.
A Dexter table saw consists of several mechanical and electrical assemblies that must operate correctly to ensure suitable cutting conditions.
The motor drives the saw blade, while the flanges help secure it to the shaft. Adjustment mechanisms allow cutting parameters to be set, and protective devices help reduce risks during operation.
When a component becomes worn or damaged, replacing the affected part may restore the machine to working condition without having to replace the entire equipment.
In this category, you can notably find:
Part specifications may vary between manufacturing versions. It is therefore essential to consult the information provided on each product page.
Blade flanges for table saws are essential mechanical components used to secure the saw blade to the machine's shaft.
The inner and outer flanges allow the blade to be properly clamped according to the mounting system specified by the manufacturer.
A damaged or deformed flange, or one with an uneven contact surface, may compromise the correct positioning of the saw blade.
Our catalogue includes inner and outer blade flanges for Scheppach HS105 table saws and other compatible machines.
Before ordering a flange for your Dexter DX254TS, it is important to check the dimensions, shaft diameter, component shape and original part reference.
Never install a flange that is only approximately suitable or modify a component in an attempt to make it compatible.
The bevel gear for Dexter table saw is a mechanical component that may be used in the machine's adjustment mechanisms.
Depending on the saw's design, it transmits movement between mechanical components, particularly when a change in the direction of rotation is required.
Our catalogue includes a bevel gear measuring 31.5 x 10 mm, position 53, offered for certain Scheppach, Redstone, Toolson and Dexter table saws.
A defective gear may cause several problems:
Before replacing a gear, it is advisable to inspect the associated gears and transmission shafts.
Misalignment or a blocked mechanism may cause the replacement part to become damaged again.
The gear segment for table saw contributes to the operation of certain adjustment or transmission mechanisms.
This component has a toothed section that allows movement to be transferred to another gear.
Over time, the teeth may wear or break, particularly when a mechanism is operated against abnormal resistance.
We notably offer a gear segment, position 20, for Scheppach HS105 table saws and other compatible models.
This part may be required when an adjustment no longer operates correctly or when the mechanism develops excessive play.
Before ordering for a Dexter DX254TS, check the shape, dimensions and correspondence with your machine's exploded diagram.
The blade guard for Dexter table saw is an essential safety device during cutting operations.
It is designed to limit access to the exposed part of the blade and help reduce the risk of accidental contact with the rotating saw blade.
A blade guard may become damaged following an impact, improper handling or wear affecting its mounting components.
Our catalogue includes different blade guard references for certain Scheppach, Redstone and Dexter table saws.
Two versions must be distinguished according to the manufacturing date:
These references correspond to different configurations. It is therefore essential to check the manufacturing date and the list of compatible machines before ordering.
The blade guard must be correctly installed and operate according to the manufacturer's instructions.
A table saw must never be operated with a missing, broken or deliberately disabled blade guard.
The riving knife for Dexter table saw is a safety component positioned behind the saw blade.
It helps keep the saw kerf open after the blade passes through the material and reduces the risk of the wood pinching the blade.
This pinching may cause the workpiece to be violently thrown back towards the operator, a particularly dangerous phenomenon known as kickback.
Our catalogue includes the riving knife reference 5901308082, position A134, intended for certain Scheppach, Redstone and Dexter table saws manufactured from October 2019 onwards.
It is important to respect the manufacturer's specifications, particularly the riving knife thickness, its position relative to the blade and its compatibility with the saw blade being used.
A bent, cracked or unsuitable riving knife must be replaced with a compliant component.
Important: this reference must not be considered compatible with every Dexter DX254TS table saw without prior verification.
The clamping lever for Dexter table saw is used on certain mechanisms designed to lock or maintain an adjustment.
Depending on its position on the machine, it may help secure a moving component after adjustment.
A damaged lever may make tightening difficult, prevent a mechanism from locking correctly or require excessive force.
Our catalogue includes the clamping lever reference 5901308009, position 44, offered for certain compatible Scheppach, Redstone and Dexter table saws.
Before ordering, check the lever shape, mounting system and reference shown in your machine's documentation.
It is also important to inspect the associated mechanism to ensure that no other components are damaged.
The dust extraction outlet housing for Dexter table saw forms part of the system designed to channel chips and dust produced during woodworking operations.
Depending on the machine's design, it directs cutting waste towards an outlet that can be connected to a suitable dust extraction system.
A cracked, broken or incorrectly secured housing may interfere with dust removal and encourage sawdust to accumulate in certain areas of the machine.
Our selection includes the dust extraction outlet housing reference 5901308013, position 66, intended for certain Scheppach, Redstone and Dexter table saws.
Before ordering, it is necessary to check the housing shape, mounting points and compatibility with your exact saw model.
A properly maintained dust extraction system helps limit sawdust accumulation around mechanical components and improves the cleanliness of the working environment.
Electrical components for Dexter table saws may include different control and drive elements depending on the machine model.
A defective switch may prevent normal starting or stopping of the equipment. Other malfunctions may originate from the motor, power supply or a protection device.
Our catalogue includes the switch reference 5901220018, listed for certain compatible Scheppach HM110MP and Dexter DX254 or DX254TS saws.
However, some electrical references included in this category are also associated with sliding mitre saws. They must therefore not automatically be considered suitable for a table saw.
Before replacement, it is essential to check the electrical specifications, connections, dimensions and original part reference.
Work on electrical circuits must be carried out by a person with the necessary technical expertise.
A Dexter DX254TS table saw may show various signs of wear or malfunction after regular use.
Certain symptoms may help guide the diagnosis:
These symptoms do not always immediately identify the faulty component. A complete diagnosis is recommended before replacing any part.
Choosing a spare part for Dexter DX254TS table saw requires accurate identification of the machine.
Several Dexter models may resemble Scheppach, Redstone or Toolson machines. However, differences may exist in dimensions, mounting systems and mechanical components.
Before ordering, we recommend checking the following information:
The manufacturing date is particularly important for certain safety devices, especially blade guards and riving knives, whose references may differ between versions.
It is also essential not to confuse the Dexter DX254TS with Dexter TS8, TS8XL or TS10 models, or with a Dexter DX254 sliding mitre saw.
WARNING: BEFORE PURCHASING, ALWAYS CHECK THE EXACT MODEL OF YOUR MACHINE, ITS MONTH AND YEAR OF MANUFACTURE AND ITS SERIAL NUMBER. ALWAYS CONSULT THE LIST OF COMPATIBLE MACHINES PROVIDED ON EACH PRODUCT PAGE.
Regular maintenance helps preserve the operation of your Dexter DX254TS table saw and reduce the risk of premature wear.
After each use, it is advisable to clean the worktable and remove chips and dust accumulated in accessible areas.
The saw blade should be inspected regularly to check the condition of its teeth, ensure that it is not deformed and confirm that it is suitable for the material being cut.
The blade flanges must remain clean and in good condition to ensure correct blade mounting.
Adjustment mechanisms should operate without excessive force. Unusual resistance may indicate sawdust accumulation, a damaged gear or an alignment problem.
Safety devices, particularly the blade guard and riving knife, must remain correctly installed and fully functional.
The dust extraction system should also be inspected to limit sawdust accumulation around mechanical components.
If unusual noise, excessive vibration or an electrical malfunction occurs, stop the machine immediately and identify the source of the problem.
Before performing any maintenance or replacing a component, completely disconnect the saw from its power supply and wait until the blade has stopped rotating.
At Probois Machinoutils, we offer a selection of spare parts for Dexter DX254TS table saws to help you maintain and repair your woodworking equipment.
Our catalogue includes blade flanges, bevel gears, gear segments, blade guards, riving knives, clamping levers and dust extraction housings.
We also offer replacement components for various Scheppach, Redstone, Toolson and other machines, depending on the references and compatibility information provided.
The availability of individual parts may vary according to our suppliers' stock levels.
Replacing a worn or damaged component may extend the service life of your table saw and avoid premature replacement of the entire machine.
Whether you are looking for a gear for Dexter DX254TS table saw, a blade guard, a riving knife, a blade flange or a clamping lever, carefully consult the product pages to identify the correct reference for your machine.
Explore our selection of replacement parts for Dexter DX254TS table saws and maintain your equipment regularly to preserve its reliability, cutting accuracy and service life.
