Spare Part for Dexter TS8 Table Saw: Repair and Maintain Your Machine

Are you looking for a spare part for your Dexter TS8 table saw to repair your machine, replace a worn component or restore reliable cutting performance? At Probois Machinoutils, we offer a selection of replacement parts for various Dexter table saws, a brand notably sold through Leroy Merlin stores.

The Dexter TS8 table saw is a woodworking machine designed for cutting timber and wood-based materials. It can be used for rip cuts and crosscuts, within the cutting capacities specified by the manufacturer and with appropriate guiding accessories.

With regular use, certain mechanical and electrical components may become worn, misaligned or damaged. Switches, motor components, gears, table inserts and safety guards are among the parts that may require inspection or replacement.

Our catalogue includes several spare parts for Dexter TS8 table saws, as well as references that may also be suitable for certain Scheppach, Woodster or Dexter TS8XL machines when compatibility is explicitly confirmed.

Before ordering, it is essential to check the exact model, manufacturing date and reference of the required component.

Spare Parts for Dexter TS8 and TS8XL Table Saws

The Dexter TS8 and TS8XL table saws are used for various DIY and woodworking applications requiring consistent cutting performance.

These machines can be used to cut boards, panels and various wooden workpieces, provided that their technical specifications and the manufacturer's recommendations are respected.

As with any woodworking machine, their operation relies on several mechanical and electrical assemblies. The motor drives the saw blade, while the adjustment, guiding and safety systems contribute to cutting accuracy and operator protection.

When a component becomes damaged, it may be possible to restore the machine to working condition by replacing only the affected part.

Our selection notably includes switches, armatures, motors, circuit breakers, bevel gears, blade guards, riving knives and table inserts.

However, parts intended for the Dexter TS8 are not necessarily compatible with the Dexter TS8XL. Different versions must be identified separately.

Switch for Dexter TS8 Table Saw: Control Starting and Stopping

The switch for Dexter table saw is an essential electrical component used to control the machine's operation.

A defective switch may prevent the motor from starting or cause abnormal operation of the controls.

Certain symptoms may indicate that this component requires inspection:

• The saw no longer starts when the start button is pressed.
• The control button becomes stuck or no longer operates normally.
• The switch mechanism shows visible damage.
• The machine develops an electrical control fault.

Our catalogue includes the KJD17B-4 switch, 230 V, offered for certain Woodstar ST8 and Scheppach HS80 table saws.

The presence of this switch in the category does not mean that it is suitable for every Dexter TS8 table saw. It is essential to check the original reference, electrical specifications, mounting system and connections.

Switch replacement must be carried out by a person with the necessary electrical expertise.

Armature and Motor for Dexter Table Saw: Repair the Drive System

The motor of a Dexter table saw drives the saw blade during cutting operations.

It is one of the machine's main components. Proper motor operation is essential for maintaining an appropriate rotational speed and performing cuts under the conditions specified by the manufacturer.

Depending on the motor design, certain internal components may be replaced separately, including the armature.

We offer an armature for Scheppach HS80, TS205 and Woodster ST8 table saws, corresponding to position 103 on certain exploded diagrams.

This component should only be ordered for a Dexter machine if compatibility is explicitly confirmed.

Our catalogue also includes the 1500 W motor, reference 5901311008, intended notably for compatible Scheppach HS81S and Dexter TS8XL table saws.

A defective motor may show various symptoms:

• The machine no longer starts.
• The motor produces unusual noises.
• An abnormal smell appears during operation.
• The motor develops excessive vibrations.
• The electrical protection device trips.

These symptoms may have several causes. A proper diagnosis is required before replacing the motor or armature.

Important: a motor intended for the Dexter TS8XL must not automatically be considered compatible with the Dexter TS8.

Circuit Breaker for Dexter Table Saw: Protect the Electrical Circuit

The circuit breaker for Dexter table saw is one of the electrical protection components that may be fitted to certain machines.

Depending on its design, it interrupts the power supply when an abnormal electrical condition is detected.

Repeated tripping may indicate an overload, a power supply problem, a motor fault or another electrical issue.

The circuit breaker should therefore not automatically be considered defective simply because it trips.

At Probois Machinoutils, we offer a circuit breaker for various Scheppach, Woodster, Parkside and Dexter machines, including certain table saws and other woodworking equipment.

Before ordering, it is essential to compare the original reference, electrical specifications and list of compatible machines.

A safety protection device must never be removed, bypassed or replaced with a component having unsuitable specifications.

Blade Guard for Dexter Table Saw: Maintain Cutting Safety

The blade guard for Dexter table saw is a safety component designed to limit access to the exposed section of the saw blade during cutting operations.

A correctly installed guard helps reduce the risk of accidental contact with the rotating blade.

Depending on its design, it may also help limit the projection of chips and dust.

A damaged or cracked guard, or one with a defective mounting mechanism, must be inspected before the machine is used again.

Our catalogue includes a complete blade guard for Scheppach HS80, TS205 and Woodster ST8 table saws, also offered for certain compatible Dexter and Kity machines.

This component corresponds to several positions on certain exploded diagrams, notably positions 10, 17, 29, 78 and 145.

It is essential to verify the compatibility of the guard with your machine's mounting system and safety devices.

A table saw must never be operated with a missing, damaged or deliberately disabled blade guard.

Riving Knife for Dexter Table Saw: Reduce the Risk of Kickback

The riving knife for Dexter table saw is a safety device positioned behind the saw blade.

It helps keep the saw kerf open after the blade passes through the material and reduces the risk of the wood pinching the blade.

This phenomenon may cause the workpiece to be violently thrown back towards the operator, commonly known as kickback.

A riving knife must be suitable for the blade diameter, blade body thickness and kerf width, in accordance with the machine's specifications.

Our catalogue includes the riving knife reference 3901309003, intended for certain Scheppach HS80, TS205 and Woodster ST8 table saws manufactured before August 2022.

This manufacturing date restriction is important because machines produced later may use a different component.

Before ordering a riving knife for your Dexter TS8, always check the compatibility information provided on the product page.

A bent, cracked or incompatible riving knife must not be installed on the machine.

Bevel Gear for Dexter Table Saw: Maintain the Adjustment Mechanisms

The bevel gear for Dexter table saw is a mechanical component used in certain transmission or adjustment mechanisms.

Depending on the machine's design, this type of gear transfers movement between two shafts and contributes to the operation of an adjustment system.

Over time, gear teeth may wear, break or become deformed following excessive mechanical stress.

Our catalogue includes a bevel gear measuring 32 x 16 mm, with 16 teeth (Z16), offered for various compatible Scheppach and Dexter table saws.

Several symptoms may indicate that a gear requires inspection:

• The adjustment mechanism becomes difficult to operate.
• Cracking or grinding noises occur during adjustment.
• Movement is no longer transmitted correctly.
• The gear has broken or heavily worn teeth.

Before replacement, it is important to inspect the other components of the mechanism to identify the cause of the malfunction.

Table Insert for Dexter Table Saw: Protect the Opening Around the Blade

The table insert for Dexter table saw, also known as a throat plate, is positioned around the opening through which the saw blade passes.

It helps provide a consistent supporting surface for wooden workpieces and reduces the open space surrounding the blade.

With use, the insert may crack, become deformed or develop an excessively enlarged opening.

A damaged insert may interfere with the movement of wooden workpieces and allow small pieces to become trapped in the table opening.

We notably offer the table insert reference 3901309092, intended for certain Scheppach HS80 table saws.

Its compatibility with a Dexter table saw must be checked before purchasing.

It is essential to respect the dimensions and shape of the original insert. The replacement component must be securely fitted and correctly positioned in the worktable.

How to Identify a Defective Part on Your Dexter TS8 Table Saw

Various malfunctions may occur during the service life of a Dexter TS8 table saw.

Some are related to normal component wear, while others may result from incorrect adjustment, unsuitable use or electrical problems.

• The saw no longer starts: check the power supply, switch and electrical components.
• The motor operates abnormally: inspect its condition and identify the cause of the malfunction.
• The circuit breaker trips: investigate a possible overload or electrical fault.
• Mechanical adjustments become difficult: inspect the gears and transmission components.
• The blade guard is broken: replace it with a compatible component before using the machine again.
• The riving knife is bent: check the reference and install only a suitable replacement.
• The table insert is cracked: inspect its condition and replace it if necessary.
• Cutting accuracy decreases: check the blade, adjustments and guiding devices.

These symptoms do not always identify the faulty component immediately. An accurate diagnosis helps avoid unnecessary replacement and contributes to maintaining machine safety.

How to Choose a Compatible Spare Part for Your Dexter TS8 Table Saw

Finding a spare part for Dexter TS8 table saw requires accurate identification of the machine.

Several table saws from different brands may have similar technical features or appearances without using exactly the same components.

Before ordering, we recommend checking:

• The exact brand and model of your table saw.
• The month and year of manufacture.
• The serial number shown on the machine's rating plate.
• The original reference of the required component.
• The dimensions and technical specifications of the part.
• The positions shown on the machine's exploded diagram.
• The list of compatible machines provided on each product page.

Some parts may be shared by Scheppach, Woodster, Kity and Dexter table saws. However, compatibility must be confirmed for each individual reference.

It is also important to distinguish between the Dexter TS8, TS8XL, TS10 and DX254TS models, which must not be considered identical.

WARNING: BEFORE PURCHASING, ALWAYS CHECK THE EXACT MODEL OF YOUR MACHINE, ITS MONTH AND YEAR OF MANUFACTURE AND ITS SERIAL NUMBER. ALWAYS CONSULT THE LIST OF COMPATIBLE MACHINES PROVIDED ON EACH PRODUCT PAGE.

Maintain Your Dexter Table Saw to Extend Its Service Life

Regular maintenance helps preserve the performance of your Dexter table saw and reduce the risk of premature wear.

After each use, it is advisable to clean the worktable and remove chips and dust accumulated in accessible areas.

The saw blade should be inspected regularly to check the condition of its teeth, ensure that it is not deformed and confirm that it is suitable for the material being cut.

Safety devices, particularly the blade guard and riving knife, must be maintained in proper working condition.

Adjustment mechanisms should remain clean and operate without abnormal resistance. Unusual stiffness may indicate compacted sawdust, misalignment or a damaged component.

It is also important to check the condition of the table insert and guiding devices before each use.

If unusual noise, excessive vibration or an electrical problem occurs, stop the machine immediately and identify the source of the fault.

Before performing any maintenance or replacing a component, completely disconnect the saw from its power supply and wait until the blade has stopped rotating.

Why Buy Dexter TS8 Table Saw Spare Parts from Probois Machinoutils?

At Probois Machinoutils, we offer a selection of spare parts for Dexter TS8 table saws to help you maintain and repair your woodworking equipment.

Our catalogue includes switches, motors, armatures, circuit breakers, bevel gears, blade guards, riving knives and table inserts.

We also offer replacement parts for various Scheppach, Woodster and Kity machines, depending on the references and compatibility information provided.

The availability of individual components may vary according to supplier stock.

Replacing a worn or defective component can sometimes extend the service life of your table saw and avoid premature replacement of the entire machine.

Whether you are looking for a switch for Dexter TS8 table saw, a motor for Dexter TS8XL, a bevel gear, a blade guard or a riving knife, carefully consult the product pages to identify the correct references for your equipment.

Explore our selection of replacement parts for Dexter TS8 table saws and maintain your machine regularly to preserve cutting accuracy, reliability and service life.