Belt for the saw and spindle moulder on Holzmann KF315VF-2000 and Leman COM310
Poly V belt 736J4 (290J) for the scoring saw on Holzmann KF315VF-2000 spindle moulder saw and TS315VF-2600 or TS315VF-3200 format saw, Leman COM310
660LI belt for the saw on the Holzmann FKS305VF1600/2600/3200 sliding table saw
Outer flange reference C43 for Holzmann circular saw TS315VF2600, TS315VF3200 and reference D43 for Holzmann KF315VF2000 or KF315VF2600 spindle moulder-saw
MS10x25 screw, C45 mark for Holzmann TS315VF2600, TS315VF3200 circular saw and D45 mark for Holzmann KF315VF2000 or KF315VF2600 Sliding table saw
Belt 660J4 for the thicknesser of the mini wood combined machines
Discover our selection of spare parts for Holzmann combined saw and spindle moulders, designed for the maintenance and repair of these versatile woodworking machines.
A combined saw and spindle moulder is a complete woodworking machine in its own right, designed from the outset to provide both circular sawing and spindle moulding functions within a single machine.
This type of machine is particularly suitable for woodworking workshops looking for a versatile solution for cutting, ripping, cross-cutting, profiling, grooving, rebating and moulding solid wood and wood-based panels.
Probois Machinoutils offers a range of spare parts for Holzmann combined saw and spindle moulders, including parts for the Holzmann KF315VF2000, depending on current availability.
Drive belts, spindles, bearings, pulleys, switches, handwheels, fences, sliding table components, guards and electrical parts can be replaced when worn or damaged, helping to extend the service life of the machine.
The Holzmann KF315VF2000 is a combined saw and spindle moulder designed to perform both precision sawing and spindle moulding operations on a single woodworking machine.
It combines a circular saw with scoring unit, a spindle moulder with a 30 mm spindle, a sliding table and the various adjustment and guiding systems required for accurate woodworking.
The KF315VF2000 is available in different electrical versions, including 230 V and 400 V. This distinction is particularly important when ordering electrical components such as switches, motors, contactors or other power-related parts.
Depending on availability, Probois Machinoutils offers various Holzmann KF315VF2000 spare parts for the mechanical, transmission, adjustment, guiding and electrical systems of the machine.
A combined saw and spindle moulder uses several rotating mechanical components that are essential for accurate and reliable operation.
Depending on the component concerned, replacement parts may include spindles, shafts, bearings, pulleys, spindle rings, nuts, washers, screws and other mounting components.
Bearings are particularly important because they ensure smooth rotation while limiting unwanted play in the moving assemblies.
Excessive play, abnormal noise, vibration or irregular rotation may indicate wear in a bearing, spindle, shaft or another mechanical component.
Before ordering, always identify the exact part using the exploded parts diagram for your machine.
The transmission system of a Holzmann combined saw and spindle moulder transfers motor power to the rotating components of the machine.
Drive belts are therefore important wear parts. With regular use, a belt can stretch, crack, harden, become damaged or eventually break.
A worn belt may cause slipping, vibration, irregular operation or reduced power transmission.
Depending on the machine and the required component, replacement parts may include drive belts, pulleys, shafts, bearings and other transmission components.
Always check the belt reference, profile and dimensions before ordering, even if the replacement belt appears visually similar to the original.
Electrical components are essential to the operation and safety of a Holzmann combined saw and spindle moulder.
Depending on the model and version, replacement parts may include switches, emergency stop buttons, safety switches, contactors, wiring components, capacitors on certain single-phase machines and motors.
If the machine does not start, the motor should not automatically be considered defective. A safety switch, contactor, switch or another component may prevent the machine from starting.
For machines produced in both 230 V and 400 V versions, always check the voltage shown on the identification plate before ordering an electrical spare part.
The sliding table is an integral part of the woodworking machine and allows workpieces to be guided accurately during cutting and machining operations.
With prolonged use, some sliding table components may develop play, become damaged or require adjustment.
Depending on the model and spare part availability, replacement parts may include rollers, bearings, guides, handles, locking mechanisms, stops, screws, fixing components and other sliding table parts.
A sliding table that becomes difficult to move, develops excessive play or no longer locks correctly should be inspected to identify the component responsible.
Accurate woodworking requires reliable workpiece guiding systems.
A combined saw and spindle moulder therefore uses various fences, stops, clamping components, hold-down devices and adjustment mechanisms according to the operation being performed.
These components are regularly handled and can eventually wear, become damaged or develop excessive play.
A damaged fence or adjustment component can affect machining accuracy. It is therefore advisable to replace worn components when necessary and check the machine settings after fitting the new part.
A Holzmann combined saw and spindle moulder has numerous adjustment mechanisms for setting the machine according to the required operation.
Handwheels, handles, levers, shafts, screws, threaded rods and locking mechanisms can wear or become damaged through repeated use.
These components are essential for accurately adjusting the machine and should operate smoothly without excessive play or abnormal resistance.
If an adjustment becomes unusually difficult, forcing the mechanism should be avoided. The relevant components should first be inspected to identify possible wear, damage or obstruction.
The guards and safety systems fitted to a combined saw and spindle moulder are integral parts of the machine and must remain in good working condition.
Depending on the model, various guards, covers, safety switches, emergency stop components, fixing parts and protective devices may be available as spare parts.
A damaged or missing safety component should be replaced with a compatible part intended for the machine concerned.
Never remove or permanently bypass a safety device in order to operate the machine.
To identify the correct spare part for a Holzmann combined saw and spindle moulder, first check the exact model shown on the machine identification plate.
Then use the exploded parts diagram corresponding to your machine to locate the required component and note its position number.
Depending on the type of spare part, also check the machine model, 230 V or 400 V power supply, month and year of manufacture, serial number, position number on the exploded diagram and the dimensions or technical specifications of the original component.
Using the machine model and exploded diagram is much more reliable than identifying a spare part solely by its appearance.
IMPORTANT: BEFORE ORDERING, ALWAYS CHECK THE LIST OF COMPATIBLE MACHINES PROVIDED ON THE PRODUCT PAGE.
Some components may have been modified during the production life of a Holzmann machine.
For certain spare parts, compatibility may therefore depend on the month and year of manufacture and the serial number of the machine.
Two components may look almost identical while having different dimensions, mounting points or technical specifications.
Visual similarity alone is therefore not sufficient to guarantee compatibility.
Regular maintenance helps preserve the accuracy, performance and service life of your Holzmann combined saw and spindle moulder.
Regularly check the drive belts, bearings, spindles, shafts, tool-clamping components, sliding table, fences, adjustment mechanisms and guards.
Wood dust and chips should also be removed regularly, particularly around moving mechanisms, transmission components and motors.
A worn belt, bearing with excessive play, damaged handle or defective adjustment mechanism should be replaced when necessary to prevent premature wear or damage to other machine components.
Probois Machinoutils offers a selection of spare parts for Holzmann combined saw and spindle moulders for private users, woodworkers, cabinetmakers and professional workshops wishing to maintain and repair their equipment.
You can find, depending on availability, various mechanical, transmission, electrical, guiding, adjustment and sliding table parts, particularly for the Holzmann KF315VF2000.
Whether you are looking for a drive belt, bearing, spindle, shaft, pulley, switch, handwheel, handle, fence, sliding table component or another mechanical or electrical spare part, always identify the exact machine model and the position number of the required component before ordering.
