Has your Woodstar or Woodster ST12 / ST12 O table construction saw been serving you for years and are some parts beginning to show signs of wear? A damaged fence, a riving knife that needs replacing, a damaged table extension or a faulty sliding table component does not necessarily justify replacing the entire machine. If the saw is still working properly, replacing only the affected part is often the most practical and economical solution.

This category brings together spare parts for Woodstar and Woodster ST12 and ST12 O table construction saws. You can find rip fences, fence rails, riving knives, table inserts, blade guards, sliding tables, sliding table profiles and rails, table extensions, brackets, transport wheels, handles, dust extraction hoses and outlets, blade flanges, blade retaining parts and 230 V motors.

Why repair a Woodstar ST12 table construction saw?

A table construction saw is a robust machine designed for demanding cutting work and is often kept for many years. Once you are familiar with its fence, sliding table and various adjustments, it would be a shame to replace the complete saw because of a single mechanical part that has become faulty or worn.

Repeated handling, transport and sawdust naturally put the different components under stress. Wheels, handles, fences, sliding table parts, extensions and fastening systems can eventually develop play, become distorted or suffer damage.

Before replacing your machine, take the time to identify the part that is actually causing the problem. On an ST12 that has already seen plenty of use, a targeted repair can often keep it working for many more jobs.

Parts for Woodstar and Woodster ST12 and ST12 O

The Woodstar and Woodster ST12 and ST12 O share many parts with certain table construction saws sold under the Scheppach and Kity brands. This compatibility still makes it possible to find various components for maintaining and repairing these machines today.

However, care is still required: two saws that look almost identical may have undergone changes during their production period. A part that looks similar is therefore not automatically compatible.

Before ordering, always check the exact model, reference, serial number and manufacturing date of your machine whenever this information is available.

Rip fence, fence rail and guide parts

The rip fence is essential for guiding the workpiece correctly during parallel cuts. A damaged fence, one that is difficult to lock or has excessive play, can make the saw less comfortable to use and affect the consistency of the cuts.

The fence rail and various locking parts also contribute to correct positioning. If one of these components is broken or worn, it is often possible to replace only the affected part rather than the complete assembly.

After working on the fence system, take the time to check that it is parallel to the blade before using the saw again.

Riving knife, blade guard and blade-area parts

The riving knife and blade guard are important components of the saw. The riving knife must be correctly positioned and suitable for the blade being used so that it can perform its intended function during cutting.

The table insert, blade support, retaining screw and outer flange are also among the parts available for the cutting assembly. Any damaged component in this area should be replaced with a reference suitable for the machine.

Always unplug the saw before carrying out any work near the blade. After reassembly, carefully check the fastening and positioning of all components before putting the machine back into service.

Sliding table, rail and profile

The sliding table on a table construction saw helps guide workpieces during certain cutting operations. Over time, its rail, profile or bearing components can become damaged or develop excessive play.

Depending on the affected part, it is not always necessary to replace the complete sliding table. Separate components such as the profile, rail or bearing housing allow the faulty section to be repaired more precisely.

After repair, check that the sliding table moves freely without tight spots or excessive play, and verify its alignment in relation to the blade.

Table extensions, supports and transport accessories

Side and rear table extensions increase the available surface for supporting workpieces. Their brackets can be replaced when damaged, as can certain fastening components.

The transport wheels and carrying handle are particularly useful on a construction saw that is moved regularly. They are also parts that are exposed to impacts and repeated handling.

Replacing a damaged wheel, handle or bracket helps keep the machine easy to move and pleasant to use without replacing assemblies that are still perfectly functional.

Dust extraction hose and outlet

Sawdust produced by a table construction saw can quickly accumulate around the machine. The dust extraction hose and extraction outlet allow the saw to be connected to the system designed to remove some of the dust and chips.

A punctured, crushed or badly deteriorated hose can reduce extraction efficiency. A broken outlet can also prevent a proper connection. These parts can be replaced independently of the rest of the machine.

When servicing your ST12, take the opportunity to regularly remove sawdust that has accumulated around the mechanisms and beneath the table.

230 V motor for Woodstar table construction saws

For certain versions, 230 V single-phase motors are available either separately or complete with a switch. Replacing the motor is a more substantial repair and should only be considered after the source of the fault has been correctly identified.

A saw that no longer starts does not necessarily have a failed motor. The power supply, switch and other electrical components should be checked before concluding that the motor needs replacing.

Electrical work must always be carried out with the machine disconnected from the power supply and, if in doubt, should be entrusted to a qualified person.

Identify the correct part before ordering

Woodstar and Woodster ST12 and ST12 O saws may share components with certain Kity and Scheppach saws. This compatibility is useful for keeping an older machine in service, but each part reference must be checked carefully.

Do not order a part simply because it looks like the one fitted to your machine. Check the list of compatible models on the product page and compare references, dimensions and specifications whenever they are provided.

A few minutes spent checking before purchase can often prevent an ordering error and help ensure that you receive the correct part for your saw.

Extend the life of your Woodstar ST12

A Woodstar ST12 or ST12 O that has already given years of service does not necessarily need replacing as soon as a fence, wheel, table extension or another part begins to show signs of wear. These machines often become familiar fixtures in the workshop, and once you know their settings well, repairing them can make far more sense than starting again with a new saw.

Our selection of spare parts for Woodstar and Woodster ST12 / ST12 O table construction saws allows you to replace genuinely worn or damaged components and extend the service life of your machine.

Regular maintenance, effective dust extraction and replacing worn parts at the right time all help keep your saw pleasant and safe to use for many more years.