Return spring diameter 55 mm for Holzmann SB3116RMN, SB4116HM and Jean l'ébéniste PCR3116E drill
Table for drill press Holzmann SB3116RMN
Table support reference 10004397 mark C7 for drill press
Belt for drill press Holzmann SB3116RMN and Jean l'ébéniste PCR3116E
Chuck protector for Holzmann SB3116RMN and PCR3116E drill press
Chuck protector for Holzmann SB3116RMN (new version)
Capacitor 16UF - 450V special start-up machine - Dimensions : dia. 40 mm x 72 mm
Discover our selection of spare parts for the Holzmann SB3116RMN radial bench drill press, designed for maintenance, repair and restoration of your machine. Replacing a worn or damaged component can significantly extend the service life of the drill press and help restore accurate and reliable operation.
The Holzmann SB3116RMN is a versatile radial bench drill press. Unlike a conventional drill press, its radial design allows the position of the drilling head to be adjusted, providing greater flexibility when working on different areas of the workpiece.
With regular use, mechanical, electrical and transmission components are subject to wear. Some parts may therefore require adjustment or replacement to maintain the performance and accuracy of the machine.
The Holzmann SB3116RMN radial bench drill press consists of numerous components that can be replaced individually. Depending on availability, this category includes various SB3116RMN spare parts for servicing and repairing your machine.
Available spare parts may include:
Our range of spare parts for the Holzmann SB3116RMN radial drill press is regularly updated according to the availability of individual replacement components.
One of the main features of the Holzmann SB3116RMN is its radial adjustment system. This design provides greater flexibility when positioning the drilling head compared with a conventional bench drill press.
The locking levers, shafts, supports and other components used to adjust and secure the drilling head are therefore important for the correct operation of the machine.
Excessive play, a damaged lever or a faulty locking mechanism can prevent the drilling head from being positioned correctly. The affected component should therefore be accurately identified before ordering a spare part for the Holzmann SB3116RMN.
The Holzmann SB3116RMN uses a belt and pulley drive system to transmit power from the motor to the spindle and provide different spindle speeds.
The Holzmann SB3116RMN drive belt is a wear part and should be inspected regularly. A loose, cracked, deformed or damaged belt can cause slipping, vibration, reduced power transmission or irregular spindle operation.
The pulleys and other drive components should also be checked if unusual noises or vibrations occur. Excessive play or a damaged component can affect the operation of the machine and accelerate wear on the belt or bearings.
The spindle is one of the essential components of the Holzmann SB3116RMN radial bench drill press. It provides the rotational movement required for drilling and should operate with minimal play to maintain good drilling accuracy.
Worn spindle bearings can cause vibration, unusual noises, overheating, excessive play or reduced drilling accuracy. If any of these symptoms occur, the bearings and other spindle components should be inspected.
Replacing a bearing or spindle component can help restore a Holzmann SB3116RMN that has developed excessive play or irregular operation.
The drill chuck holds the drill bit securely during drilling operations. Over time, its mechanism can become worn or damaged, particularly after repeated tightening and loosening.
When replacing a drill chuck for the Holzmann SB3116RMN or an associated component, always check the mounting type, taper and dimensions to ensure that the replacement part is fully compatible with your machine.
Do not rely solely on the appearance of a component. Two parts may look almost identical while having different dimensions, technical specifications or mounting systems.
The table of the Holzmann SB3116RMN radial drill press features various mechanisms for positioning and adjustment. The rack, crank handle, locking handles and associated shafts are used whenever the table position is changed.
Over time, these components may develop play, wear or damage. Replacing worn parts helps maintain proper table adjustment and makes it easier to position the workpiece correctly for drilling.
A drill press malfunction can also be caused by an electrical component. If the machine no longer starts, stops unexpectedly or operates abnormally, the cause should be correctly diagnosed before replacing any part.
Depending on availability, this category may also include various electrical spare parts for the Holzmann SB3116RMN, including switches, controls, motors and other electrical components required to repair the machine.
As the Holzmann SB3116RMN has been available in different power supply versions, it is particularly important to check the voltage and electrical specifications of your machine before ordering an electrical spare part.
Before carrying out any work on electrical components, the drill press must be completely disconnected from the power supply. Electrical repairs requiring specialist knowledge should be carried out by a suitably qualified person.
Regular maintenance helps reduce premature wear and maintain the performance and accuracy of your drill press. The condition of the belt, pulleys, bearings, spindle, drill chuck and the head and table adjustment mechanisms should be checked periodically.
Vibration, unusual noises, excessive spindle play or incorrect locking of the drilling head should be investigated before continuing to use the machine.
Identifying a faulty component at an early stage can prevent its wear from causing damage to other Holzmann SB3116RMN drill press components.
Before ordering a spare part for your Holzmann SB3116RMN radial bench drill press, consult the exploded diagram and spare parts list for your machine to accurately identify the required component and its position number.
This check is particularly important because some components may vary depending on the production period or machine version. A replacement part that looks similar to the original component is therefore not necessarily compatible.
IMPORTANT: BEFORE PURCHASING, always check the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Depending on the component, you may also need to check the month and year of manufacture and the serial number of your machine.
Not all spare parts for the Holzmann SB3116RMN radial bench drill press are necessarily listed in our online catalogue. If you cannot find the component you need, consult the exploded diagram for your machine to identify its position number.
To help identify the correct spare part, provide the exact drill press model, serial number, manufacturing date and position number of the required component. A photograph of the original part and its main dimensions can also help with identification.
A worn belt, faulty bearing, damaged pulley, switch, lever or other component does not necessarily mean that the complete drill press needs to be replaced. Many mechanical and electrical components can be replaced individually to restore the machine.
Replacing the faulty component can help repair your Holzmann SB3116RMN radial bench drill press, restore correct operation and extend its service life.
Probois Machinoutils offers a constantly evolving range of spare parts for Holzmann drill presses to help with the maintenance, repair and restoration of your machines.
Browse our Holzmann SB3116RMN spare parts and use the exploded diagram together with the information shown on your machine to accurately identify the replacement part you need.
