Outer flange for radial miter saws Scheppach, Woodster, Parkside, Dexter and Manupro
Outer flange Ø45/Ø16x5 mm for Scheppach, Woodster, Parkside, Dexter and Manupro radial miter saws
Outer flange Ø45/Ø16x5 mm for Scheppach, Woodster, Parkside, Dexter and Manupro radial miter saws
Inner flange for Scheppach, Woodster, Dexter, Manupro and Parkside radial miter saws
This reference guide 5901215005 is dedicated to various radial miter saws Scheppach, Woodstar, Dexter and Manupro
Screw for radial miter saw Scheppach, Parkside, Kity and Dexter
This locking lever with spring reference 5801207001 is dedicated to various radial miter saws Scheppach, Woodstar, Dexter and Manupro
Bag for radial miter saw Scheppach, Parkside, Dexter and Manupro
Table insert reference 5901215010 for radial miter saw Scheppach, Parkside, Dexter and Manupro
Plate with laser reference 5901220016 for Scheppach HM90MP, HM110MP and Dexter radial miter saw
Press for radial miter saw Scheppach HM90MP, HM110MP and Dexter DX216, DX254 and DX254TS
Arming handle reference 5901220003 and marks 40-42-43 for Scheppach HM110MP and Dexter DX254 radial miter saw
Upper handle reference 5901220019 item 133 for Scheppach and Dexter radial miter saw
Lower handle reference 5901220015 mark 120 for Scheppach and Dexter radial miter saw
Support for pieces of wood is dedicated to the radial miter saw Scheppach HM254, MST254 and Manupro MPSOR255MM
Guide rod support reference 5901220023 item 49-53 for Scheppach and Dexter radial miter saw
Are you looking for spare parts for your Dexter DX216 sliding mitre saw? At Probois Machinoutils, we offer a selection of replacement components to help maintain, repair and extend the service life of your machine.
The Dexter DX216 mitre saw, sold under the Dexter brand particularly through Leroy Merlin stores, is designed for woodcutting operations. It allows straight cuts, mitre cuts and bevel cuts for various DIY, renovation and woodworking projects.
It can be used to cut skirting boards, wooden battens, mouldings, trim and other interior fitting components. Its cutting mechanism makes it possible to carry out work requiring accurate material positioning.
Over time, certain mechanical parts may wear out, become loose or suffer damage. Accidental drops, impacts, incorrect adjustments or intensive use can also cause individual components to deteriorate.
Rather than replacing the entire machine, it may be possible to carry out a targeted repair using a replacement part compatible with the Dexter DX216.
This category includes blade flanges, cutting fences, handles, locking mechanisms, support components, table inserts and laser guidance parts.
A sliding mitre saw contains several mechanical assemblies that must operate correctly to ensure cutting quality and user safety.
The blade mounting system secures the saw blade to the motor shaft. Cutting fences help position wooden workpieces, while locking mechanisms keep certain adjustments in place.
Handles make it easier to operate the cutting head, and clamping devices help secure the material during sawing.
It is recommended to regularly check the condition of accessible components, particularly fasteners, supporting surfaces, protective devices and movement mechanisms.
Before carrying out any work, the machine must be disconnected from the mains power supply and the blade must have come to a complete stop.
When a component is damaged, it is important to identify the cause of the problem before replacing it to prevent further deterioration.
Blade flanges for mitre saws are essential components of the saw blade mounting system.
Positioned on either side of the blade, the flanges help secure it to the machine shaft when the assembly is correctly fitted and tightened according to the manufacturer's instructions.
A deformed, damaged or unsuitable flange can affect blade positioning and cause vibrations or operating problems.
Our catalogue includes an outer blade flange and an inner blade flange offered for various mitre saws equipped with 216 mm or 254 mm blades from Scheppach, Woodster, Parkside, Dexter and Manupro.
The outer flange offered has dimensions of approximately Ø45/Ø16 x 5 mm. These specifications must be compared with those of the original component before ordering.
It is essential to check the diameter, bore, thickness and shape of the flange. A component whose dimensions do not exactly match the machine's blade mounting system must not be installed.
Replacing blade flanges must always comply with the manufacturer's assembly and tightening instructions.
The cutting fence of a mitre saw plays an important role in positioning the material during sawing.
It provides a reference surface against which the wooden workpiece can be placed to help achieve consistent cuts.
A damaged, deformed or incorrectly secured fence can cause poor material positioning and affect cutting accuracy.
In this category, we offer a cutting fence, reference 5901215005, designed for various Scheppach, Woodstar, Dexter and Manupro sliding mitre saws.
Before replacing a fence, check its shape, dimensions, mounting points and compatibility with the exact version of your Dexter DX216.
After installation, angle settings and fence alignment must be checked to ensure correct positioning of the workpieces.
The blade fixing screw is an essential component of the saw blade mounting assembly.
Our selection includes an M8x20 screw offered for certain Scheppach, Parkside, Kity and Dexter mitre saws.
This component may be required when the original screw is damaged, has a worn thread or needs replacing during maintenance or repair.
It is important to remember that blade fixing screws may have specific characteristics, particularly regarding thread direction and mechanical strength.
A screw with similar dimensions is therefore not necessarily interchangeable with the original component.
Before ordering, check the exact reference, thread direction and mounting specifications required for the machine.
Locking levers for sliding mitre saws are used to secure certain machine components in a specific position, depending on the design of the mechanism.
They may be involved in adjusting and locking certain moving parts.
This category includes a locking lever with spring, reference 5801207001, offered for various Scheppach, Woodstar, Dexter and Manupro sliding mitre saws.
A broken or deformed lever, or one whose mechanism no longer operates correctly, may make it difficult to secure an adjustment.
Before replacing it, it is advisable to inspect the condition of the spring, fasteners and other associated components.
The replacement lever must match the original mechanism. After installation, the locking function must be checked before the machine is returned to service.
The table insert for a mitre saw is located around the area where the blade passes through the worktable.
It helps support the material close to the cutting area and limits the opening around the blade, depending on the machine's design.
Over time, this insert may show cutting marks, cracks or damage caused by contact with the blade.
Our catalogue includes a table insert, reference 5901215010, offered for various Scheppach, Parkside, Dexter and Manupro sliding mitre saws.
A severely damaged insert may no longer perform its intended function and should be replaced when it no longer allows normal machine operation.
Before ordering, compare the dimensions, shape and mounting points of the replacement insert with those of the original component.
The laser guidance system of a mitre saw provides a useful aid for positioning the material before cutting.
It projects a cutting reference onto the wooden workpiece and can make certain tasks requiring accurate positioning easier.
This category includes a laser circuit board, reference 5901220016, offered for various Scheppach HM90MP, HM110MP and Dexter sliding mitre saws.
When a laser device stops working, it is important to determine whether the problem comes from the module itself, its power supply or its connections.
The laser circuit board should only be replaced after checking its compatibility with the exact version of the machine.
After installation, the laser position must be checked and adjusted if necessary according to the manufacturer's instructions.
The workpiece clamp for a mitre saw is an accessory designed to hold wooden material securely during cutting operations.
Proper workpiece clamping helps limit unwanted movement and makes it easier to achieve consistent cuts.
We offer a workpiece clamp suitable for certain Scheppach HM90MP, HM110MP and Dexter DX216, DX254 and DX254TS sliding mitre saws.
A clamp may need replacing when its rod is bent, its tightening mechanism is damaged or it can no longer hold the material correctly.
Before ordering, check the dimensions of the mounting system and its compatibility with the machine's table.
Clamping pressure must be appropriate for the material being cut, and the clamp must never interfere with the blade path or protective devices.
The handles of a sliding mitre saw allow the cutting head to be operated and help control its movement during work.
A handle may become damaged following an impact, accidental drop or prolonged use.
This category includes an upper handle, reference 5901220019, part number 133, as well as a lower handle, reference 5901220015, part number 120, offered for certain Scheppach and Dexter sliding mitre saws.
An operating handle, reference 5901220003, is also available for certain models, including the Scheppach HM110MP and Dexter DX254.
Please note that the presence of these components in the category does not mean that they are all automatically suitable for the Dexter DX216. It is essential to check the references and compatibility information provided on each product page.
A cracked or broken handle, or one showing excessive movement, must be inspected and replaced if it no longer allows safe machine operation.
Workpiece supports for mitre saws help position materials, particularly when cutting relatively long pieces.
They contribute to improved working comfort and can make it easier to support wooden components during repetitive cutting operations.
Our catalogue includes a set of two workpiece supports offered for certain Scheppach, Manupro and Dexter sliding mitre saws.
We also offer a guide rod support, reference 5901220023, corresponding to part numbers 49-53 and designed for certain Scheppach and Dexter sliding mitre saws.
This component is associated with the machine's guiding system. A damaged mounting point or support may affect the operation of the relevant mechanism.
Before replacing it, it is essential to check the rod diameter, support dimensions and mounting points. The component offered is intended in particular for a 25 mm diameter guide rod.
The dust collection bag for a mitre saw is designed to collect some of the sawdust produced during woodcutting operations.
It helps reduce the dispersion of wood chips around the machine, although it does not replace a suitable dust extraction system when one is required.
Our selection includes a dust collection bag offered for various Scheppach, Parkside, Dexter and Manupro sliding mitre saws.
A torn or damaged bag, or one whose attachment no longer fits securely, may need replacing.
It is important to check the connection diameter and attachment system to select a bag compatible with your machine.
For work generating significant amounts of fine dust, the use of an appropriate dust extraction system and suitable personal protective equipment remains recommended.
Certain mitre saws sold under the Dexter, Scheppach, Woodster, Parkside and Manupro brands may share similar mechanical components.
It is therefore possible to find blade flanges, fences, table inserts, screws or accessories offered for several different models.
This potential compatibility can make it easier to find replacement components for machines whose original parts are difficult to obtain.
However, two saws with a similar appearance do not necessarily use identical components.
Differences may exist in dimensions, mounting points or production versions. It is therefore essential to check the compatibility information provided for each product.
Before ordering a spare part for the Dexter DX216 mitre saw, we recommend checking the information displayed on your machine's identification plate.
To reduce the risk of ordering an incorrect component, several checks are recommended:
For components involved in securing the saw blade, it is particularly important to comply with the original specifications.
If you are unsure, a photograph of the part to be replaced and the machine's identification plate may help with identification.
Replacing a defective component can be an economical solution when the machine is otherwise in good working condition.
Changing a damaged cutting fence, broken handle, worn table insert or defective workpiece clamp can help extend the service life of your saw.
Repairing equipment also helps prevent premature replacement and can reduce the amount of electrical and mechanical waste generated.
However, it remains essential to check the overall condition of the machine. A saw with significant structural damage or defective safety devices must not be used until appropriate repairs have been completed.
As a specialist in woodworking machinery, tools and spare parts, Probois Machinoutils supports both private users and professionals in maintaining and repairing their equipment.
Our category dedicated to the Dexter DX216 sliding mitre saw includes a selection of replacement components: blade flanges, cutting fences, table inserts, handles, locking levers, workpiece clamps, laser components, dust collection bags and guide supports.
Each product page provides the available specifications and compatibility information to help you select the correct component for your machine.
If you cannot find the reference you need, you can contact our customer service team with the exact model of your saw and, if possible, a photograph of the part to be replaced.
Explore our selection of spare parts for Dexter DX216 sliding mitre saws to carry out necessary maintenance, repair your equipment and continue your woodworking, DIY and interior fitting projects.