Dexter Compressor Parts
Air hose for Scheppach and Dexter air compressors - Ref. 3906115004
Air hose Ref. 3906115004 for Scheppach and Dexter air compressors
Spare Part for Dexter Air Compressor: Repair and Maintain Your Equipment
Are you looking for a spare part for your Dexter air compressor to repair your machine, replace a damaged component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for maintaining and repairing various Dexter air compressors, according to the compatibility information provided on each product page.
The Dexter brand, distributed through retailers including Leroy Merlin, is well known among DIY enthusiasts and home workshop users. It offers a range of workshop equipment, including air compressors designed to power pneumatic accessories, inflate tyres and other objects, or perform blowing and cleaning operations.
An air compressor is subjected to mechanical, electrical and pneumatic stresses. With repeated use, certain components may wear out, deteriorate or lose their original properties.
An air leak, pressure loss or damaged component does not necessarily mean that the entire machine needs replacing. In some cases, replacing a spare part for your Dexter air compressor can help restore satisfactory operation.
This category includes an air pipe reference 3906115004 for Scheppach and Dexter compressors, as well as a 33 mm diameter O-ring for certain Scheppach compressors.
Compatibility may vary depending on the model, version and manufacturing date. It is therefore essential to check the relevant references before ordering.
Why Replace a Defective Part on Your Dexter Air Compressor?
A Dexter air compressor is designed to produce and store compressed air before delivering it at a pressure suitable for the intended application.
To operate correctly, several components must maintain an airtight seal and withstand the stresses generated by air compression.
When a component in the pneumatic circuit becomes damaged, different problems may occur:
- Abnormal pressure loss in the system.
- An audible air leak during or after operation.
- Longer air receiver filling times.
- More frequent motor starts to compensate for air loss.
- Reduced performance when using pneumatic accessories.
- Visible damage to an air pipe or sealing component.
These symptoms can have several causes. An accurate diagnosis is necessary to determine whether the problem comes from an air pipe, fitting, seal or another component.
Once the defective part has been identified, replacing it may offer an economical solution and help extend the compressor's service life.
Air Pipe for Dexter Compressor: Replace a Damaged Pneumatic Line
The air pipe for Dexter air compressor is a component of the pneumatic circuit that carries compressed air between different parts of the machine.
Depending on its position and the compressor's design, this pipe may be exposed to pressure variations, high temperatures and vibrations during operation.
Our catalogue includes air pipe reference 3906115004 for Scheppach and Dexter compressors.
This reference provides a replacement option for the compatible models specified on its product page. It is essential to check that your machine corresponds to one of the intended versions.
An air pipe in good condition helps maintain the airtightness of the system and ensures proper circulation of compressed air.
When cracked, punctured or deformed, it may cause an air leak that interferes with the compressor's operation.
Signs that an air pipe may need replacing include:
- A visible crack in the pipe.
- A puncture or damage to its surface.
- An air leak around one of its ends.
- Significant deformation of the pipe.
- Wear caused by friction or vibration.
- Deterioration resulting from excessive heat.
Before ordering Scheppach and Dexter air pipe reference 3906115004, compare the original component with the information available on the product page.
In particular, check the dimensions, connections, shape and reference number of your compressor.
Important: an air pipe designed to carry compressed air must be suitable for the machine's operating pressures and temperatures. It must never be replaced with an ordinary hose that does not meet the manufacturer's requirements.
O-Ring for Air Compressor: Maintain Proper Sealing Between Components
An O-ring for air compressor is a sealing component used in certain mechanical and pneumatic assemblies.
Its circular shape allows it to fit into a specially designed groove to reduce air leakage between two mating surfaces.
Depending on its location, it may be subjected to compression forces, temperature changes and pressure.
Our catalogue includes a 33 mm diameter O-ring for certain Scheppach compressors.
Although this part appears in the Dexter compressor category, its compatibility with a Dexter machine must not be assumed without prior verification.
Over time, an O-ring may deteriorate due to material ageing, temperature variations or repeated mechanical stress.
Several signs may indicate that a seal requires inspection:
- Visible cracks or splits.
- A flattened or deformed seal.
- Loss of flexibility.
- Tearing or breakage.
- Air leakage around the relevant assembly.
- Unusual signs of wear.
To choose the correct O-ring, knowing its approximate diameter is not sufficient.
You must also check its inside diameter, cross-sectional thickness, material and the dimensions of its groove.
An unsuitable seal may prevent correct assembly or fail to provide the airtightness required for the compressor to operate properly.
How to Identify an Air Leak on a Dexter Compressor
An air leak on a Dexter compressor may be noticeable through a hissing sound, a drop in pressure or more frequent motor operation.
Air loss may originate from several areas of the pneumatic system, including pipes, fittings, seals and other components.
It is important to distinguish an abnormal leak from air discharge that forms part of the normal operation of certain devices, particularly when the compressor stops.
Several observations can help guide the diagnosis:
- An audible leak near a pipe: inspect the condition of the pipe and its connections.
- A pressure drop when the compressor is switched off: investigate possible leakage in the pneumatic circuit.
- An unusually long filling time: check for possible air leaks and inspect the compression system.
- A leak around a mechanical connection: inspect the seals and mating surfaces.
- A visibly damaged pipe: identify a compatible replacement reference.
An air leak may also originate from a component that is not available in this category. It is therefore preferable to confirm the source of the problem before ordering a part.
All inspections and repairs must comply with the manufacturer's safety instructions. Pipes, fittings and sealing components must only be dismantled when the compressor has been disconnected from its power supply and completely depressurised.
How to Choose a Compatible Spare Part for Your Dexter Air Compressor
Finding a spare part for Dexter air compressor starts with accurately identifying your machine.
Two compressors with a similar appearance may be equipped with different components. Manufacturers may also modify certain parts during production.
It is therefore important not to rely solely on the compressor's external appearance or the similarity between two references.
Before ordering, we recommend checking the following information:
- Brand: Dexter, Scheppach or another relevant manufacturer.
- Exact model: as indicated on the machine's identification plate.
- Manufacturing reference: when specified on the machine.
- Serial number: useful for distinguishing between different versions.
- Manufacturing date: some components may vary depending on the production period.
- Original part number: if it can still be identified.
- Dimensions: particularly important for air pipes, fittings and seals.
- Exploded parts diagram: when available for your model.
For air pipe reference 3906115004, check that your compressor appears among the compatible models and that the pipe specifications match those of the original component.
For the 33 mm O-ring, check the exact dimensions and compatibility information for the relevant compressor.
Some Scheppach parts may also be used on certain Dexter machines, but this possibility must never be considered universal compatibility.
IMPORTANT: BEFORE ORDERING A SPARE PART, ALWAYS CHECK YOUR DEXTER COMPRESSOR'S EXACT MODEL, REFERENCE NUMBER, SERIAL NUMBER AND THE COMPATIBILITY INFORMATION PROVIDED ON THE PRODUCT PAGE.
Dexter AC50ATD Compressor and Other Models: Pay Attention to Manufacturing Differences
Users frequently search for spare parts for Dexter AC50ATD compressors and various other workshop compressors from the brand.
These machines may have different specifications depending on their capacity, motor design, pneumatic circuit and manufacturing period.
It is therefore essential to find a part suitable for the exact version of your machine rather than selecting a component simply because it is intended for a Dexter compressor.
For example, the dimensions of an air pipe, the position of its connections or the specifications of a seal may vary between different models.
The fact that a part is offered for a Scheppach compressor does not automatically mean that it will fit a Dexter AC50ATD compressor.
Likewise, references intended for certain Dexter vertical compressors are not necessarily interchangeable with those used on other compressor configurations.
To avoid mistakes, it is preferable to compare the manufacturer's part number and the characteristics of the original component with the product information.
This precaution helps reduce the risk of ordering a part whose dimensions or connections do not match your equipment.
Maintain Your Dexter Air Compressor to Reduce Breakdowns
Regular maintenance is essential for preserving the operation and service life of your Dexter air compressor.
Properly maintained equipment is generally less likely to experience premature component deterioration.
It is advisable to periodically inspect pneumatic pipes, connections and accessible sealing components according to the manufacturer's recommendations.
The main maintenance operations may include:
- Cleaning the compressor's external surfaces.
- Checking the condition of air pipes.
- Visually inspecting pneumatic connections.
- Looking for signs of deterioration on accessible components.
- Checking the operation of pressure gauges and other measuring instruments.
- Maintaining the air intake filter when fitted.
- Draining condensate from the air receiver according to the manufacturer's instructions.
- Respecting the compressor's specified operating cycles.
Particular attention should be paid to pipes exposed to vibration or temperature variations.
Seals should also be replaced when deterioration is detected and their replacement is provided for by the manufacturer.
A compressor showing significant air leakage, abnormal overheating or a safety-related malfunction must not continue to be used until the problem has been identified and corrected.
Before carrying out any maintenance or repair, disconnect the compressor from its electrical supply, allow it to cool down and completely depressurise the air receiver and pneumatic circuit according to the manufacturer's instructions.
Work on electrical components, safety devices and pressurised parts should be carried out by a qualified professional whenever necessary.
Why Buy Dexter Air Compressor Spare Parts from Probois Machinoutils?
At Probois Machinoutils, we offer spare parts for Dexter air compressors to help users maintain and repair their equipment.
Our selection includes Scheppach and Dexter air pipe reference 3906115004, as well as a 33 mm O-ring intended for certain Scheppach compressors.
We also sell spare parts for various machines from Scheppach, Woodster, Parkside and Dexter, depending on the references available in our catalogue.
Our aim is to make replacement components easier to find and help extend the useful life of machines whenever repair is technically possible.
Replacing a damaged air pipe or worn sealing component can help avoid prematurely replacing a compressor that is otherwise still functional.
Parts availability may vary depending on stock levels and supplier deliveries.
Before ordering, take the time to review the specifications and compatibility information provided on each product page.
Whether you are looking for an air pipe for Dexter compressor, an air compressor seal or a solution for repairing an air leak, discover our selection of replacement parts and maintain your equipment to preserve its reliability and service life.