Filter cartridge FP2, one of the most efficient for dust collector diameter 500 mm
Felt Filter bag for different dust collector 150-300 liters diameter 500 mm
Felt Filter bag for different dust collector 150-300 liters diameter 500 mm
Y Dust Extraction Fitting diameter 125 mm + 2 x 100 mm outlets with Blast Gate
Y Dust Extraction Fitting diameter 125 mm + 2 x 120 mm outlets with Blast Gate
Turbine metal blades curved to the right diameter 300 mm for dust collector
Plastic lower bag for dust collector Ø500 mm - Set of5 pieces
Plastic lower bag for dust collector Ø500 mm - Set of 10 pieces
Turbine outlet connection for dust collector Ø500 mm
Remote control start system to be installed on vacuum cleaners of the type FM300, FM300S, FM350, AC150 and other models of all brands.
Remote control start system to be installed on vacuum cleaners of the type FM300, FM300S, FM350, AC150 and other models of all brands.
Wheel for chip vacuum cleaners of all brands like those presented below - Sold individually
Filter cartridge Bernardo FP3, the most efficient for dust collector diameter 500 mm
Turbine metal blades curved to the left diameter 300 mm for dust collector
Discover our selection of spare parts for the Holzmann ABS2480 dust collector and maintain your dust extraction system for woodworking machines.
A dust collector is essential for collecting the waste produced during sawing, jointing, thicknessing and spindle moulding operations. It removes wood chips as they are generated and helps keep the working environment cleaner.
Over time, certain components may wear out, become damaged or require replacement. A torn filter bag, damaged impeller, broken connector or leak in the collection system can reduce the dust collector's performance.
At Probois Machinoutils, we offer a range of parts and accessories for maintaining, repairing and equipping your Holzmann ABS2480 dust collector, including filter cartridges, filter bags, collection bags, steel impellers, extraction connectors, branch connectors, castors and electrical accessories.
Our selection is regularly updated to meet the needs of woodworking machine users, whether they are DIY enthusiasts or professionals.
The Holzmann ABS2480 is a dust collector designed to remove waste generated by woodworking machines.
Its operation relies on several complementary components.
The impeller generates the airflow required to transport wood chips.
The electric motor drives the impeller.
The extraction connectors provide the connections between the different sections of the system.
The collection bags collect wood chips and make disposal easier.
The filter bags or filter cartridges retain some of the particles present in the exhaust air.
The fastening components and castors help secure the various parts and allow the dust collector to be moved.
A failure affecting any of these components may disrupt the overall operation of the dust collector.
Before ordering a spare part, it is therefore important to identify the defective component accurately and check its compatibility with your machine.
The FP2 filter cartridge with a diameter of 500 mm is one of the filtration solutions available in this category.
It is intended for dust collectors compatible with this mounting diameter.
A filter cartridge helps retain particles carried by the airflow and limit their release into the workshop.
It provides an alternative to the upper filter bag when the dust collector's configuration allows it to be installed.
When should a filter cartridge be replaced?
Replacement may be necessary when the filter media is torn, significantly deformed or damaged in a way that compromises its operation.
A heavily clogged cartridge may also reduce airflow.
Before replacing it, check the available cleaning methods and the manufacturer's maintenance recommendations.
Main specification: 500 mm mounting diameter.
It is essential to check the attachment system and the cartridge's exact compatibility with your Holzmann ABS2480 before ordering.
This category also includes the Bernardo FP3 filter cartridge with a diameter of 500 mm.
It provides another filtration option for compatible dust collectors.
The choice between different cartridges must be based on their technical specifications, filtration performance and mounting systems.
An identical diameter is not sufficient to guarantee that two cartridges are interchangeable.
Before purchasing, check the dimensions, attachment system and list of compatible machines provided on each product page.
For operations that generate fine wood dust, it is essential to select filtration equipment suited to the risks and protection requirements of the workshop.
The felt filter bag with a diameter of 500 mm is designed for installation on the upper section of a compatible dust collector.
Its purpose is to allow air to pass through while retaining some of the extracted dust and particles.
A filter bag in good condition contributes to the consistent operation of the extraction system.
Conversely, a torn or incorrectly secured bag may allow dust to escape into the working environment.
When should the felt filter bag be replaced?
Replacement may be necessary in the following situations:
Torn or punctured fabric.
Damaged seams.
Significant deformation of the bag.
Poor attachment to its support.
Persistent clogging despite appropriate maintenance.
Before ordering, check the 500 mm mounting diameter and the retaining system.
Do not confuse the upper filter bag with the lower collection bag used to collect wood chips.
We also offer a cotton filter bag with a diameter of 500 mm for compatible dust collectors.
This component provides filtration in the upper section of the collection system.
It allows air to pass through while retaining some of the particles transported by the airflow.
The choice of a filter bag must take into account its dimensions, attachment method and filtration characteristics.
When should a cotton filter bag be replaced?
Replacement is recommended when the fabric has holes, tears or damaged seams.
A bag that can no longer be secured correctly should also be replaced.
If extraction performance decreases, first check how clogged the bag is, as well as the condition of the extraction hose and other components.
Important: A cotton or felt filter bag must not be considered sufficient protection against fine wood dust on its own unless its filtration performance is suitable and documented.
The plastic collection bags with a diameter of 500 mm are designed to collect the wood chips extracted by the machine.
They are offered for dust collectors with a collection capacity of approximately 150 to 300 litres, subject to compatibility.
This category includes several pack sizes to make it easier to keep replacement bags in stock.
The collection bag is an important consumable for dust collector maintenance.
It must be sufficiently strong, correctly sized and securely attached to its support.
When should the collection bag be replaced?
Replacement is necessary when the bag is full, torn or punctured.
A poorly secured bag may also cause wood chips and dust to escape.
Before ordering, check:
The 500 mm mounting diameter.
The capacity of the collection system.
The bag dimensions.
The retaining system used on your dust collector.
An identical diameter does not automatically guarantee that the bag is suitable for every configuration.
The impeller is a central component of the extraction system.
Driven by the electric motor, it generates the airflow required to transport wood chips from the woodworking machine to the collection system.
This category includes two types of 300 mm diameter steel impellers:
Impeller with blades oriented to the right.
Impeller with blades oriented to the left.
The blade orientation is an essential selection criterion: these two impellers must not be considered interchangeable.
Before ordering, carefully compare the original impeller with the specifications of the replacement part.
In particular, check the outside diameter, height, bore, mounting system and blade orientation.
When should an impeller be replaced?
An impeller may require replacement if its blades are broken, cracked or deformed, or if its attachment is damaged.
Significant vibrations or metallic noises may also indicate a problem.
If this occurs, stop the dust collector immediately and disconnect it from the power supply before inspecting it.
Also check whether the fault involves the motor shaft, housing or a fastening component.
An unsuitable impeller may cause vibrations, mechanical damage or incorrect operation of the dust collector.
The 125 mm diameter outlet connector offered in this category is designed to attach to the impeller housing of a compatible dust collector.
It provides the connection between the extraction unit's outlet and the components of the collection system.
A connector in good condition helps maintain an airtight system and limit airflow losses.
When should an extraction connector be replaced?
Replacement may be necessary if it is cracked, broken or deformed, or if its mounting points are damaged.
A poorly fitted connector may cause air leaks and reduce extraction efficiency.
Before ordering, check the 125 mm diameter, mounting dimensions and configuration of your dust collector.
The branch connector with a 125 mm internal diameter inlet and two 100 mm outlets allows an extraction system to be divided into two connections.
It is supplied with a sliding connector designed to facilitate the connection of the extraction hose to the machine.
This accessory can be useful for organising the extraction network in a workshop equipped with several woodworking machines.
It allows connections to be adapted to the available diameters.
Before ordering, carefully check the dimensions of your installation.
Main specifications:
Inlet internal diameter: 125 mm.
Number of outlets: 2.
Outlet diameter: 100 mm.
The presence of two outlets does not mean that the dust collector can operate two machines simultaneously with the same performance as a single connection.
Actual performance depends on the available airflow, pressure losses, hose lengths and network configuration.
This category also includes a branch connector with a 125 mm internal diameter inlet and two 120 mm outlets.
It allows another connection configuration for compatible dust extraction systems.
Main specifications:
Inlet internal diameter: 125 mm.
Number of outlets: 2.
Outlet diameter: 120 mm.
Equipment: Sliding connector for attaching the extraction hose to the machine.
Before purchasing, measure the diameters of your hoses and the connectors fitted to your machines.
It is also important to consider the length of the extraction network and any reductions in diameter, as these may affect extraction performance.
The remote-control starting system allows a compatible dust collector to be switched on remotely.
This accessory is offered in particular for dust collectors in the FM300, FM300S, FM350 and AC150 series, as well as other models from different brands.
It can improve convenience when the dust collector is positioned away from the workstation.
However, compatibility with the Holzmann ABS2480 must not be assumed automatically.
Before ordering, check the system's electrical specifications, your dust collector's supply voltage, the permitted power rating and the connection requirements.
Important: An electrical device designed for a single-phase power supply must not be installed on a three-phase machine without explicit confirmation of compatibility.
Installation must comply with the manufacturer's instructions and be carried out by a qualified person whenever the work requires it.
Castors make it easier to move a dust collector around the workshop.
This category includes a replacement castor sold individually, offered for various dust collectors.
A broken, seized or heavily worn castor can make the machine difficult to move and compromise its stability.
When should a castor be replaced?
Replacement may be necessary when:
The wheel is broken or cracked.
The castor no longer rotates correctly.
The bracket is deformed.
The mounting system is damaged.
The dust collector becomes unstable when moved.
Before ordering, compare the castor dimensions, bracket and mounting system with those of the original part.
A castor described as suitable for several brands is not necessarily compatible with every machine.
A reduction in extraction performance may have several causes.
It is therefore not always necessary to replace the motor or impeller immediately.
Full collection bag: An excessive accumulation of wood chips may interfere with airflow.
Clogged filter bag: A blocked filter may restrict airflow.
Blocked filter cartridge: A saturated cartridge may reduce the dust collector's performance.
Blocked extraction hose: Wood chips or pieces of timber may partially obstruct the system.
Cracked connector: An air leak may reduce extraction efficiency.
Incorrectly configured branch connection: Opening several branches may change the airflow available at each machine.
Damaged impeller: Damaged or deformed blades may disrupt airflow.
Motor problem: An electrical or mechanical fault may prevent the impeller from operating normally.
A systematic diagnosis is recommended before ordering a spare part.
Always disconnect the dust collector from the power supply before dismantling a component or investigating a possible blockage.
Regular maintenance helps preserve your dust collector's performance and reduce the risk of breakdowns.
Empty the collection bags before they become excessively full.
Regularly check the condition of the filter bags or filter cartridges.
Clean filter components only in accordance with their manufacturer's recommendations.
Check that the extraction hoses and connectors are free from cracks and obstructions.
Inspect the bag retaining components and the connections throughout the extraction system.
Pay attention to unusual vibrations and noises coming from the impeller.
Also check the condition of the castors and the overall stability of the dust collector.
Before carrying out any maintenance, cleaning or repair work, disconnect the machine from the power supply and wait until the impeller has come to a complete stop.
Operations that generate fine wood dust require suitable dust capture and filtration equipment. Simply replacing one fabric bag with another does not, on its own, guarantee an adequate level of protection.
Before ordering a component, start by checking the information on your dust collector's identification plate.
Record the exact model, supply voltage, serial number and, where necessary, manufacturing date.
Then consult the machine's exploded parts diagram to identify the component you need.
For an impeller, check the diameter, bore, mounting dimensions and, above all, blade orientation.
For a filter cartridge or bag, check the mounting diameter and dimensions.
For a connector or branch fitting, measure the inlet and outlet diameters accurately.
For a castor, compare the dimensions and mounting system.
For an electrical accessory, always check the voltage, permitted power rating and connection requirements.
Two visually similar parts may have different technical specifications.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
A breakdown does not necessarily mean that the entire dust collector needs to be replaced.
When a diagnosis accurately identifies the defective part, replacing the affected component may extend the machine's service life.
A torn filter bag, damaged impeller, broken connector or worn castor may be repaired through targeted component replacement.
However, the overall condition of the dust collector and the nature of the fault must be taken into account.
Electrical work and complex mechanical repairs should be entrusted to a qualified person.
Replacing a component with an unsuitable part may cause further malfunctions. This is why checking part references and dimensions before ordering is essential.
At Probois Machinoutils, we are expanding our selection of spare parts and accessories for Holzmann dust collectors to help you maintain and repair your woodworking machines.
In this category, you will find Ø 500 mm filter cartridges, felt and cotton filter bags, plastic collection bags, Ø 300 mm steel impellers, Ø 125 mm connectors, branch connectors, castors and control accessories.
If you cannot find the component you need, please provide the exact model of your dust collector, its supply voltage, serial number and, if possible, the position number shown on its exploded parts diagram.
A photograph of the original component together with its dimensions may also help us identify the correct replacement.
Explore our range of spare parts for the Holzmann ABS2480 dust collector and check their compatibility before ordering to maintain your extraction system and restore your machine to working order.
