Woodturning bed extension for mini wood lathe 510 mm
230V motor for Holzmann D510F wood lathe also suitable for Leman TAB050
Complete drive for the Holzmann D510F wood lathe
Poly V belt for Holzmann D510F et Leman TAB050
KJD20 switch for different woodworking machines
Carbon set for Holzmann D510F and Leman TAB050 wood lathe with manufacturing date from 2017 or measuring 18x11x6.4 mm
Set of carbons for Holzmann D510F and Leman TAB050 wood lathe with manufacturing date before 2017
Locking handle for the Holzmann D510F wood lathe
Locking handle for the Leman TAB050 or TAB085 wood lathe
Training claw for Kity TAB 660 and Scheppach DM460T
Are you looking for spare parts for your Holzmann D510F wood lathe? Probois Machinoutils offers a selection of replacement components to maintain, repair and extend the service life of this variable-speed benchtop wood lathe.
The Holzmann D510F is a compact yet robust wood lathe equipped with a 735 W motor and offering a distance between centres of 510 mm. Its design combines a Poly-V belt transmission with an electronic variable-speed system. Three mechanical speed ranges are available by changing the position of the belt on the pulleys, allowing the machine to be adapted to different woodturning operations.
Over time and with regular use, certain mechanical, electrical or electronic components may naturally wear out or require replacement. Our selection includes the motor, speed controller, belt, carbon brushes, KJD20 switch, speed sensor, spindle, clamping components and various woodturning accessories.
Our D510F category includes different components for maintaining and repairing the main functions of the machine:
230 V motor for Holzmann D510F.
Complete speed controller for Holzmann D510F.
Poly-V drive belt.
KJD20 switch.
Set of carbon brushes for machines manufactured before 2017.
Set of carbon brushes for machines manufactured from 2017 onwards.
Speed sensor, position B-13.
Spindle and shaft assembly.
200 mm tool rest with 25.3 mm diameter post.
Bed extension.
Locking lever.
Drive centre.
75 mm screw faceplate with M33 x 3.5 mm thread.
Various components compatible with the Holzmann D510F and, for certain references, the Leman TAB050.
Not all parts are necessarily interchangeable between different machine versions or models. It is therefore essential to check the compatibility information provided on each product page.
The 230 V motor is naturally one of the main components of the D510F.
It drives the spindle through the transmission system and belt.
However, a lathe that no longer starts or appears to lack power does not necessarily have a defective motor.
Before replacing the complete motor, it is advisable to check the different components that may cause similar symptoms: power supply, motor carbon brushes, speed controller, switch, connections, belt and mechanical transmission.
A slipping belt, for example, may cause a loss of drive that can mistakenly be interpreted as insufficient motor power.
Heavily worn carbon brushes can also cause starting difficulties, intermittent cut-outs or irregular operation.
The motor should therefore ideally be replaced only after a diagnosis has ruled out other possible causes.
The electronic speed controller allows the lathe speed to be adjusted within the ranges provided by the mechanical transmission.
It is an important component of the D510F, particularly when adapting the rotational speed to the diameter and balance of the wooden workpiece.
A faulty speed controller may cause different symptoms, including failure to start, irregular operation or an inability to adjust the speed correctly.
However, these symptoms alone do not establish that the speed controller is defective.
Before replacing it, the other components of the electrical circuit and motor should be checked.
It is also essential to compare the original component with the replacement speed controller and verify the manufacturing information of the machine.
The Poly-V belt transmits movement from the motor to the spindle.
On the D510F, it also plays an important role in selecting the different speed ranges, since its position on the pulleys determines the mechanical operating range.
Like any transmission belt, it is subject to wear.
Over time, it may stretch, crack, lose grip or develop damaged ribs.
A worn belt may cause slipping, irregular transmission, loss of speed under load or unusual noises.
When replacing it, also check the condition and alignment of the pulleys.
The Holzmann D510F uses different motor carbon brush versions depending on its manufacturing period.
We offer a set of carbon brushes for machines manufactured before 2017, as well as another version for machines manufactured from 2017 onwards.
The brushes for versions manufactured from 2017 onwards can notably be identified by their dimensions of 18 x 11 x 6.4 mm.
It is therefore essential not to order carbon brushes based solely on the D510F model name.
Check the manufacturing date of your machine and, where necessary, measure the original brushes.
Carbon brushes are motor wear parts.
They provide the electrical contact required for motor operation and gradually become shorter with use.
Heavily worn carbon brushes may cause:
Difficult starting.
Intermittent motor operation.
Cut-outs during use.
Irregular running.
Loss of power.
Poor contact with the commutator.
It is generally preferable to replace both carbon brushes together to maintain even wear.
Worn carbon brushes do not necessarily mean that the complete motor needs replacing.
The KJD20 switch is used on various woodworking machines and is one of the replacement parts available for the D510F.
A defective switch may prevent the machine from starting or cause abnormal operation.
Before ordering, however, it is important to check the exact model installed on your machine, its connections and electrical specifications.
Two switches that look similar externally do not necessarily have the same wiring or electrical characteristics.
Comparison with the original component is therefore essential.
The speed sensor, position B-13, is available for the Holzmann D510F and the Leman TAB050.
It is part of the system that detects rotation and provides the information required for speed indication or monitoring.
If the speed indication becomes incorrect or disappears, the sensor is one of the components that may need checking.
However, the sensor should not automatically be replaced whenever a display problem occurs.
The connections, wiring and other associated components should also be inspected to identify the actual cause of the fault.
The spindle and shaft assembly is an essential part of the lathe's transmission and rotational system.
The spindle receives the various accessories used to hold or drive the workpiece and must maintain smooth, regular rotation.
A mechanical fault in this area may cause abnormal play, vibration or irregular rotation.
Before replacing the spindle, the associated components should also be checked to determine the precise source of the problem.
The D510F exploded view can be used to identify the different components of the assembly by their position numbers.
The D510F features an M33 threaded spindle, a widely used standard on wood lathes.
This configuration allows various compatible accessories, such as chucks and faceplates, to be fitted.
However, the M33 designation alone is not always sufficient to establish complete accessory compatibility.
The diameter, thread pitch, available clearance and mounting characteristics must be checked before use.
The 75 mm screw faceplate available in this category features an M33 x 3.5 mm thread.
It allows certain wooden workpieces to be mounted directly for different turning operations.
Before use, the faceplate must be correctly screwed onto the spindle and the wooden workpiece must be securely attached.
It is also important to select a speed suited to the dimensions, shape and balance of the workpiece.
A heavily unbalanced rough workpiece should always be turned at a low speed during the initial operations.
The 200 mm tool rest with a 25.3 mm diameter post supports and guides woodturning tools during operation.
The tool rest should be positioned as close as practical to the workpiece while maintaining sufficient clearance to prevent contact during rotation.
Before starting the machine, check that the tool rest is securely locked.
After adjusting its position, rotate the workpiece manually to ensure that it cannot come into contact with the rest.
An incorrectly secured tool rest can compromise both turning accuracy and operating safety.
The locking lever is used to secure certain adjustable components of the lathe after positioning.
With repeated use, a lever may become damaged, crack or no longer provide sufficient clamping force.
When a mechanism no longer locks correctly, it is preferable to identify the actual defective component before replacing a complete assembly.
Replacing a simple lever may sometimes be sufficient to restore the clamping system.
The drive centre transfers the spindle's rotational movement to the workpiece during turning between centres.
It is fitted on the headstock side and engages slightly into the wood to provide drive.
The workpiece must be correctly centred and the drive centre sufficiently engaged to prevent slipping.
A damaged or heavily worn drive centre may reduce drive efficiency and increase the risk of the wood slipping during operation.
A bed extension is available for the Holzmann D510F and Leman TAB050.
It increases the lathe's capacity, allowing longer workpieces to be turned than those accommodated by the original bed.
The extension must be installed carefully to ensure correct alignment with the main lathe bed.
Incorrect alignment may prevent smooth tailstock movement or cause misalignment between the different lathe components.
After installation, check the continuity and alignment of the guiding surfaces.
A starting problem can have several causes.
Before ordering a motor or speed controller, begin by checking the power supply and the general condition of the machine.
Then inspect the KJD20 switch, motor carbon brushes and accessible connections.
Also check that the mechanical transmission is not blocked.
Depending on the symptoms, the speed controller and motor can then be tested.
This approach helps avoid unnecessarily replacing expensive components.
No. A perceived loss of power during turning does not automatically mean that the motor is defective.
The belt may slip under load.
The carbon brushes may be heavily worn.
A poorly sharpened turning tool can also place considerably more load on the motor.
The diameter of the wood, selected speed and depth of cut also have a significant influence on the effort required from the machine.
Before replacing the motor, it is therefore important to determine whether the loss of performance actually comes from the motor or another component.
The D510F combines electronic speed variation with three mechanical speed ranges obtained by changing the belt position on the pulleys.
This design allows the machine to be adapted more effectively to different turning operations.
For a large-diameter or heavily unbalanced workpiece, a low speed range is particularly important.
For smaller diameters and properly balanced workpieces, a higher speed may be used according to the operation being performed.
Selecting the correct mechanical range also helps avoid unnecessarily relying on the electronic system to compensate for an unsuitable transmission configuration.
Vibration does not necessarily originate from a defective lathe component.
In woodturning, a rough workpiece can naturally be highly unbalanced.
Begin by checking the centring and mounting of the wood, and reduce the speed if necessary.
Then check the securing of the drive centre, tailstock, tool rest and any accessories fitted to the spindle.
The belt, pulleys and spindle can also be inspected if the vibration persists.
A proper diagnosis must take into account both the machine and the wooden workpiece being turned.
Regular maintenance helps limit premature wear and maintain good operating conditions.
Always disconnect the machine from the mains before carrying out any maintenance work.
Regularly remove wood chips and dust accumulated around the motor, transmission and adjustment mechanisms.
Keep the lathe bed clean so that the tailstock and other sliding components can move normally.
Periodically inspect the belt for cracks, wear or other signs of deterioration.
Turning tools should also remain properly sharpened. A blunt tool considerably increases the effort required for cutting and may place unnecessary strain on the motor and transmission.
The manufacturing year is particularly important for certain Holzmann D510F spare parts.
Carbon brushes are a clear example, as different versions are available for machines manufactured before 2017 and those manufactured from 2017 onwards.
It is therefore not advisable to order a component based solely on the machine model.
The serial number, manufacturing date, component dimensions and any references marked on the original part help ensure correct identification.
Before ordering, record as much of the following information as possible:
Exact model: Holzmann D510F.
Serial number.
Manufacturing month and year.
Information shown on the rating plate.
References marked on the original component.
Position number shown on the exploded view.
Dimensions of the original part.
Electrical specifications and connections for electrical components.
For carbon brushes, pay particular attention to their dimensions and the manufacturing year of the machine.
For a motor, speed controller or switch, also compare the electrical specifications and connections.
WARNING: BEFORE PURCHASING, make sure your machine is listed in the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Where required, also check the manufacturing month and year and the serial number of your machine.
Visual similarity alone never guarantees that a part is compatible.
The D510F includes several electrical and electronic components: motor, speed controller, switch, carbon brushes and speed sensor.
Before replacing any of these components, it is advisable to carry out as accurate a diagnosis as possible.
A machine that no longer starts does not necessarily require a new motor or speed controller.
Similarly, a speed display problem does not automatically mean that the sensor is defective.
Electrical or electronic parts that have already been installed may be subject to specific return conditions. It is therefore essential to check compatibility and the likely cause of the fault before installation.
Several parts available for the D510F are also listed as compatible with the Leman TAB050.
This notably applies to certain components such as the motor, belt, carbon brushes, tool rest, speed sensor and bed extension.
However, this does not mean that every part from the two machines is automatically interchangeable.
Compatibility must be checked individually on the relevant product page.
Replacing a specific spare part can often significantly extend the service life of a wood lathe.
A worn belt, worn-out carbon brushes, a defective switch, a speed sensor or a broken locking lever does not justify replacing the complete machine.
When the bed, structure and main components of the lathe remain in good condition, a targeted repair is a practical way to keep the machine in service.
The availability of mechanical, electrical and electronic components makes it possible to carry out repairs according to the fault actually identified.
Probois Machinoutils offers a selection of spare parts for the Holzmann D510F wood lathe to make maintenance and repairs easier.
You can find the 230 V motor, complete speed controller, Poly-V belt, different generations of carbon brushes, KJD20 switch, speed sensor, spindle and shaft assembly, 200 mm tool rest, bed extension, locking lever, drive centre and M33 x 3.5 mm screw faceplate.
Before ordering, take the time to identify your machine and its original component accurately, particularly for electrical parts and components that have changed according to the manufacturing year.
Probois Machinoutils helps you find spare parts for your Holzmann D510F wood lathe so that you can maintain, repair and extend the service life of your machine.
