Filter By

Brand

Brand

Price

Price

  • €3.00 - €70.00

Availability

Availability

Parts for Zipper ZI-MOS4T brush cutter

Parts for Zipper ZI-MOS4T brush cutter - Probois Machinoutils

Active filters

Spare Part for Zipper ZI-MOS4T Brush Cutter: Maintain and Repair Your Machine

The Zipper ZI-MOS4T petrol brush cutter is a garden machine equipped with a four-stroke engine, designed for maintaining outdoor areas, cutting tall grass and clearing vegetation in difficult-to-reach places. It is a practical piece of equipment for maintaining gardens, plots of land and other outdoor spaces.

Like any petrol-powered garden machine, the Zipper ZI-MOS4T brush cutter requires regular maintenance to preserve its performance and ensure reliable operation. Over time, certain components may wear out, deteriorate or develop faults, particularly in the engine, fuel system, ignition system or operating controls.

At Probois Machinoutils, we offer a selection of spare parts for the Zipper ZI-MOS4T brush cutter to make maintaining and repairing your equipment easier.

This category includes carburettors, air filters, spark plugs, ignition coils, recoil starters, fuel hoses, fuel tanks, fuel caps, throttle handles, switches and transmission components.

Our aim is to help you identify the correct replacement part for your brush cutter, extend its service life and avoid prematurely replacing a machine that can still be repaired.

Carburettor for Zipper ZI-MOS4T Brush Cutter: Ensuring Proper Fuel Supply

The carburettor for the Zipper ZI-MOS4T brush cutter plays an essential role in the operation of its petrol engine. It prepares the air-fuel mixture required for combustion.

A carburettor in good condition helps ensure reliable starting, smooth engine operation and an appropriate response when accelerating.

Over time, deposits may form inside the carburettor, particularly when the machine remains unused for a long period with fuel left in the system.

A clogged or defective carburettor can cause various symptoms:

  • A brush cutter that is difficult to start.
  • An engine that stalls after a few seconds of operation.
  • Unstable engine speed.
  • Difficulty accelerating.
  • Loss of power while cutting vegetation.
  • An engine that no longer starts despite several attempts.

However, these symptoms may also be caused by other components, including the air filter, spark plug or fuel supply system.

We offer a replacement carburettor for the Zipper ZI-MOS4T brush cutter, intended to replace the original component when a fault has been confirmed.

Before ordering, it is important to check the carburettor reference and its compatibility with the exact version of your machine.

Recoil Starter for Zipper ZI-MOS4T Brush Cutter: Restoring Reliable Starting

The recoil starter for the Zipper ZI-MOS4T brush cutter allows the petrol engine to be turned manually during the starting process.

This mechanism is used every time the machine is started. It may gradually show signs of wear, particularly in the starter rope, recoil spring or engagement components.

A damaged recoil starter can make starting difficult or even impossible.

Common problems include a starter rope that no longer retracts correctly, a mechanism that spins without engaging or a starter that no longer turns the engine.

Our catalogue includes a replacement recoil starter for the Zipper ZI-MOS4T brush cutter.

Before replacing this component, we recommend checking that the problem actually comes from the starting mechanism rather than a mechanical blockage inside the engine.

Installation must follow the manufacturer's instructions, using the original fixing points and maintaining all protective devices.

CM7H Spark Plug for Zipper ZI-MOS4T Brush Cutter

The CM7H spark plug for the Zipper ZI-MOS4T brush cutter is an essential component of the petrol engine's ignition system.

It produces the spark required to ignite the air-fuel mixture inside the combustion chamber.

A worn, fouled or damaged spark plug can interfere with starting and engine performance.

Several symptoms may indicate that the spark plug needs to be checked:

  • Difficulty starting the engine when cold or hot.
  • Ignition misfires.
  • Irregular engine operation.
  • Loss of power.
  • Failure to start despite an adequate fuel supply.

We offer a CM7H spark plug suitable for the Zipper ZI-MOS4T brush cutter.

When replacing the spark plug, it is important to use the type recommended by the manufacturer and follow the installation and electrode gap specifications provided in the technical documentation.

Installing a new spark plug will not necessarily solve every starting problem. If the fault persists, other ignition system components may need to be inspected.

Ignition Coil for Zipper ZI-MOS4T Brush Cutter

The ignition coil for the Zipper ZI-MOS4T brush cutter is part of the system that generates the electrical energy required for engine ignition.

When this component develops a fault, the engine may become difficult to start or stop operating correctly.

A defective ignition coil may cause a lack of spark at the spark plug or intermittent ignition problems.

However, these symptoms can also be associated with a faulty spark plug, a damaged electrical connection or a malfunctioning engine stop switch.

Our selection includes a replacement ignition coil for the Zipper ZI-MOS4T.

Before replacing this component, we recommend diagnosing the ignition circuit to avoid purchasing an unnecessary spare part.

Installation and any required adjustments must comply with the manufacturer's technical specifications.

Air Filter for Zipper ZI-MOS4T Brush Cutter: Protecting the Four-Stroke Engine

The air filter for the Zipper ZI-MOS4T brush cutter protects the engine against dust, plant debris and other impurities present in the surrounding air.

During brush cutting, the machine often operates in dusty areas or environments containing large amounts of vegetation. The air filter can therefore become progressively clogged.

A heavily obstructed filter restricts the airflow required for normal engine operation and may reduce performance.

Possible symptoms include poor acceleration, irregular running or abnormal fuel consumption.

We offer a replacement air filter for the Zipper ZI-MOS4T brush cutter.

We recommend checking its condition regularly and cleaning or replacing it according to the manufacturer's maintenance instructions.

The brush cutter must not be operated without the air filter specified for protecting its engine.

Fuel Hose and Fuel Tank for Zipper ZI-MOS4T Brush Cutter

The fuel system of the Zipper ZI-MOS4T brush cutter delivers petrol from the fuel tank to the carburettor.

It consists of several components, including the tank, fuel hoses, connections and parts responsible for maintaining a reliable seal.

Over time, fuel hoses may harden, crack or lose their flexibility due to ageing and prolonged contact with petrol.

A damaged fuel hose can cause a petrol leak or interfere with the engine's fuel supply.

We offer fuel hoses with hose clamps for the Zipper ZI-MOS4T brush cutter.

Our catalogue also includes a replacement fuel tank and a fuel tank cap for this model.

A cracked tank or a cap that no longer seals correctly must be replaced to reduce the risk of fuel leakage.

Before carrying out any work on the fuel system, the engine must be switched off and allowed to cool completely. Repairs must be performed in a well-ventilated area, away from flames, sparks and heat sources.

Throttle Handle and On-Off Switch for Zipper ZI-MOS4T Brush Cutter

The throttle handle for the Zipper ZI-MOS4T brush cutter allows the operator to control engine speed while cutting vegetation.

It contributes to operating comfort and helps maintain control of the machine.

A broken handle, damaged throttle control or mechanism that no longer returns correctly can make the brush cutter difficult and unsafe to operate.

We offer a replacement throttle handle for the Zipper ZI-MOS4T.

This category also includes an on-off switch with cable, designed to control engine shutdown.

A defective switch may prevent the engine from stopping normally or cause electrical malfunctions.

It is essential to maintain a fully functional engine stop system. A brush cutter with a faulty stop switch must not be used until the problem has been repaired.

Angle Gearbox and Transmission Components for Zipper ZI-MOS4T Brush Cutter

The angle gearbox of a petrol brush cutter helps transmit movement from the drive system to the cutting attachment.

It is subjected to considerable mechanical loads during brush cutting, particularly when the machine is used in dense vegetation.

Insufficient maintenance or damaged components may cause vibration, unusual noises or difficulties transmitting power to the cutting attachment.

Our selection includes a nut set for the angle gearbox of the Zipper ZI-MOS4T brush cutter.

These components must be replaced with suitable parts to ensure that the relevant assemblies remain correctly secured.

It is important to check the condition of the fasteners regularly and follow the manufacturer's recommendations regarding angle gearbox maintenance and lubrication.

Before working on transmission components, the engine must be switched off and the cutting attachment must have come to a complete stop.

Oil Hose and Engine Oil Cap for Zipper ZI-MOS4T Brush Cutter

The Zipper ZI-MOS4T brush cutter is equipped with a four-stroke engine that requires appropriate lubrication.

Unlike a two-stroke engine that operates with a petrol-oil mixture, a four-stroke engine has a separate lubrication system, depending on its design.

It is therefore essential to follow the manufacturer's recommendations concerning engine oil, oil level and maintenance procedures.

In this category, you can find an oil hose for the Zipper ZI-MOS4T brush cutter as well as an engine oil cap.

A damaged cap or a component of the lubrication system showing signs of leakage must be inspected and replaced if necessary.

An insufficient oil level can cause poor lubrication and seriously damage the engine.

We therefore recommend checking the oil level according to the manufacturer's instructions and never operating the machine when a known lubrication fault is present.

Why Is My Zipper ZI-MOS4T Brush Cutter Not Starting?

A Zipper ZI-MOS4T brush cutter that no longer starts may be affected by several different faults.

Before replacing any component, it is important to identify the cause of the problem.

Possible causes include:

  • Defective spark plug: the spark required for combustion may be missing or insufficient.
  • Damaged ignition coil: the ignition system may no longer operate correctly.
  • Clogged carburettor: the engine's fuel supply may be disrupted.
  • Damaged fuel hose: petrol may no longer reach the carburettor correctly.
  • Blocked air filter: insufficient air may enter the engine.
  • Faulty stop switch: a problem in the engine stop circuit may prevent the engine from running.
  • Damaged recoil starter: the engine may no longer be turned correctly during starting.
  • Lubrication or mechanical problem: the engine may experience operating difficulties.

It is also important to check that the machine contains the appropriate fuel and that the petrol is in suitable condition, particularly after a long period of storage.

If the engine is mechanically blocked, never force the recoil starter.

Why Does My Zipper ZI-MOS4T Brush Cutter Stall When Accelerating?

A Zipper ZI-MOS4T brush cutter that stalls when accelerating may have a problem with its fuel supply, air intake or ignition system.

A clogged carburettor can interfere with the fuel supply when engine speed increases.

A partially obstructed or damaged fuel hose may also restrict the flow of petrol.

A heavily contaminated air filter can affect the air intake and disrupt normal engine operation.

The condition of the spark plug and other ignition system components should also be checked.

Loss of power does not necessarily mean that the carburettor needs to be replaced.

A systematic diagnosis helps avoid unnecessarily replacing components that are still functioning correctly.

How to Maintain Your Zipper ZI-MOS4T Brush Cutter

Regular maintenance is essential to preserve the performance of your Zipper ZI-MOS4T petrol brush cutter.

Maintenance operations must be carried out according to the instructions and intervals specified in the manufacturer's user manual.

Several checks are particularly important:

  • Regularly remove grass and plant debris from the machine.
  • Check the condition of the air filter and replace it when necessary.
  • Inspect the spark plug.
  • Check fuel hoses and the tank for possible leaks.
  • Make sure the throttle control operates correctly.
  • Verify that the engine stop switch functions properly.
  • Check the oil level of the four-stroke engine.
  • Follow the manufacturer's recommendations for angle gearbox maintenance.
  • Inspect fasteners and protective guards.
  • Clean and store the brush cutter according to the manufacturer's instructions after use.

Before storing the machine for an extended period, it is also important to follow the manufacturer's recommendations regarding fuel management and storage preparation.

A properly maintained brush cutter is generally easier to start and less likely to develop faults caused by dirt accumulation or ageing components.

How to Identify the Correct Spare Part for Your Zipper ZI-MOS4T Brush Cutter

To order a spare part compatible with your Zipper ZI-MOS4T brush cutter, it is essential to check the information displayed on the machine's identification plate.

The exact model, serial number and manufacturing date may be required to identify certain components correctly.

We recommend following these steps:

  • Check the exact Zipper ZI-MOS4T model reference.
  • Record the brush cutter's serial number.
  • Consult the exploded parts diagram corresponding to your machine.
  • Identify the item number of the required component.
  • Compare its shape and dimensions with the original part.
  • Check connections when ordering carburettors and fuel hoses.
  • Verify the specifications of ignition system components.
  • Carefully read the compatibility information provided in each product description.

Some spare parts may be shared by several brush cutters or garden machines from different brands, including Zipper, Scheppach, Woodstar and Parkside.

However, visual similarity alone does not guarantee compatibility.

BEFORE PURCHASING, PLEASE CHECK THE LIST OF MACHINES COMPATIBLE WITH THE REQUIRED SPARE PART. Differences may exist depending on the month or year of manufacture and the serial number of your brush cutter.

Repair Your Zipper ZI-MOS4T Brush Cutter Instead of Replacing It

When a petrol brush cutter develops a fault, replacing the entire machine is not always necessary.

If the problem is caused by a replaceable component, purchasing a replacement part for the Zipper ZI-MOS4T brush cutter may provide an economical solution.

Replacing a defective carburettor, recoil starter, spark plug, ignition coil, fuel hose or throttle handle may restore the machine to working condition, provided that the fault has been correctly identified.

This approach helps extend the service life of your equipment and reduces the need to replace a machine that can still be repaired.

However, all repairs must be carried out in accordance with the manufacturer's safety instructions, particularly when working on engine components, the fuel system or the transmission.

Probois Machinoutils: Your Specialist in Zipper ZI-MOS4T Brush Cutter Spare Parts

At Probois Machinoutils, we offer spare parts for maintaining and repairing a wide range of garden machines, including Zipper petrol brush cutters.

This category is specifically dedicated to the Zipper ZI-MOS4T brush cutter and brings together various components designed to extend its service life.

You can find carburettors, air filters, CM7H spark plugs, ignition coils, recoil starters, fuel hoses, fuel tanks, fuel caps, switches, throttle handles and transmission components.

Our selection may change depending on manufacturer availability and customer requirements.

If you are looking for a component that is not listed in our catalogue, you can provide us with the exact model reference of your machine, its serial number and, if possible, the item number shown in the exploded parts diagram.

This information will help identify the required component and check whether it can be supplied.

Explore our selection of spare parts for the Zipper ZI-MOS4T brush cutter and find the right components to maintain, repair and extend the service life of your garden equipment.