Switch 6 pole for table saw Scheppach HS110, Parkside PTKS 2000 F4
6-pole switch for Scheppach HS110 table saw (manufactured from November 2019), Parkside PTKS 2000 F4 and other models
6-pole switch for Scheppach HS110 table saw (manufactured from November 2019), Parkside PTKS 2000 F4 and other models
Angle guide for table saw Parkside PTKS2000F4, Scheppach HS111 and HS112
Capacitor for various Kity and Scheppach radial miter saws and Parkside table saws
Switch 4 pole to the table saw Scheppach HS110 (from 2021), Parkside PTKS 2000 F4
Warning ! Check if your machine needs the switch with 4 or 6 poles before purchase!
Riving knife for Parkside table saw PTKF2000F4
Table insert for table saw Parkside PTKS 2000 F4
Pair of brushes for table saw Scheppach and Parkside
Are you looking for a spare part for your Parkside PTKS 2000 F4 table saw to repair your machine or replace a damaged component? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of this Parkside circular table saw, designed for woodworking and timber cutting.
The Parkside PTKS 2000 F4 is a table saw used for various cutting operations, including rip cuts and crosscuts in timber suitable for the machine's capabilities. It is particularly useful for DIY enthusiasts and workshop users who need a stationary circular saw for their woodworking projects.
Like any woodworking machine, it contains mechanical and electrical components as well as safety devices that may become worn or damaged over time.
Our catalogue includes electrical switches, mitre gauges, capacitors, riving knives, table inserts and motor carbon brushes. Some of these parts are also used on Scheppach circular table saws, including the HS110, HS111 and HS112 models, depending on the specific reference.
Before ordering, it is essential to check the exact model of your table saw and the compatibility of the required component.
A circular table saw is subjected to repeated mechanical and electrical demands during cutting operations. The motor drives the saw blade at high speed, while the guiding systems help position and support workpieces correctly.
Over time, certain components may show signs of wear or suffer accidental damage. A faulty switch may prevent the machine from starting, while a damaged mitre gauge may make accurate adjustments more difficult.
Similarly, a damaged table insert or a bent riving knife requires particular attention to maintain the machine's normal operating conditions.
Repairing a machine by replacing a suitable component can often extend its service life and avoid the need to purchase new equipment.
The electrical switch of a table saw controls the starting and stopping of the motor. It is therefore an essential component of the machine's control system.
Our catalogue includes a 6-pole switch for the Parkside PTKS 2000 F4 circular table saw, also offered for certain Scheppach HS110 table saws manufactured from November 2019 onwards.
A switch may need replacing if it shows visible damage, no longer operates correctly or cannot reliably control the machine.
However, a starting problem should not automatically be attributed to the switch. The fault may also originate from the motor, power supply or another electrical component.
Before ordering, compare the number of poles, electrical ratings, connections and dimensions with those of the original switch.
Important: work on electrical components must be carried out by a qualified person with the machine disconnected from the power supply. A switch must never be replaced with a model whose specifications differ from those required by the manufacturer.
Our selection also includes the CK5-11 4-pole switch, offered for certain Scheppach HS110 table saws manufactured from 2021 onwards, for the Parkside PTKS 2000 F4 depending on its version, and for other compatible machines.
It is essential to distinguish this switch from the 6-pole version. Although both components perform a similar function, they are not necessarily interchangeable.
Differences may concern the wiring arrangement, number of contacts, electrical characteristics or mounting system.
To avoid ordering the wrong part, we recommend checking the markings on the original switch and comparing its configuration with the information provided on the product page.
Replacement must follow the manufacturer's electrical wiring diagram. Improvised wiring modifications may cause malfunctions and create serious safety hazards.
The mitre gauge for a circular table saw helps guide a wooden workpiece during certain crosscutting and angled cutting operations, according to the machine's capabilities.
It is an important accessory for repetitive cuts and for achieving consistent workpiece positioning.
Our catalogue includes a mitre gauge for the Parkside PTKS 2000 F4, also offered for Scheppach HS111 and HS112 table saws.
A mitre gauge may need replacing if it is broken, bent, incomplete or if its adjustment mechanism can no longer hold the selected angle correctly.
Before ordering, check compatibility with the guide slot in your saw table, as well as the dimensions and mounting arrangement.
A properly fitted mitre gauge can improve working comfort and the repeatability of angle settings. It must always be used according to the manufacturer's instructions and must never replace the machine's required safety devices.
The capacitor in an electric motor contributes to the operation of certain single-phase motors. Depending on its design, it may be involved in motor starting or continuous operation.
Our catalogue includes a capacitor intended for various Kity and Scheppach sliding mitre saws, as well as certain compatible Parkside circular table saws.
A faulty capacitor may cause starting difficulties, abnormal operation or prevent the motor from running correctly.
However, these symptoms may have other causes. A proper diagnosis is therefore necessary before replacing the component.
When selecting a replacement capacitor, it is essential to check its capacitance in microfarads (µF), rated voltage, type and electrical connections.
A capacitor with specifications different from those required by the manufacturer must not be installed.
Capacitors may retain an electrical charge after the machine has been disconnected. Inspection and replacement should only be performed by someone with the appropriate technical qualifications.
The riving knife of a circular table saw is an important safety component. Positioned behind the saw blade, it helps reduce the risk of the wood closing onto the blade during certain cutting operations.
It therefore contributes to reducing the risk of workpiece kickback, although it does not eliminate all hazards associated with circular saw operation.
Our selection includes a riving knife listed for the Parkside PTKF 2000 F4. As this designation differs from the PTKS 2000 F4, compatibility must be confirmed before purchasing.
A riving knife may need replacing if it is bent, cracked, damaged or can no longer be positioned correctly in relation to the saw blade.
It is essential to respect the dimensions and adjustments specified by the manufacturer, particularly the thickness of the riving knife, the saw blade body thickness and the cutting kerf width.
An incompatible or incorrectly aligned riving knife may interfere with the movement of the workpiece and compromise operator safety.
The machine must not be operated with a missing or defective safety device when that device is required for the cutting operation.
The table insert for a Parkside circular table saw is positioned around the blade opening in the worktable.
It helps maintain a continuous supporting surface and limits the opening around the saw blade according to its design.
Our catalogue includes the table insert, reference 5901316008, intended for the Parkside PTKS 2000 F4 table saw.
This component may become damaged following an impact, incorrect adjustment or accidental contact with the blade.
A cracked, broken or severely distorted table insert may affect the proper support of wooden workpieces on the saw table.
Before replacement, check the part reference, shape and dimensions to ensure that the insert fits your machine correctly.
After installation, the insert must be correctly positioned and secured according to the manufacturer's instructions. It must not come into contact with the saw blade in any permitted cutting position.
Motor carbon brushes for Parkside circular table saws are electrical components used in motors equipped with carbon brush systems.
They provide electrical contact with the motor commutator and may gradually wear during operation.
Our catalogue includes a pair of carbon brushes, reference 5901308021, replacing reference 5901316011, intended for certain Scheppach and Parkside circular table saws.
When carbon brushes become worn, the motor may experience starting difficulties, interruptions during operation or irregular performance.
However, these symptoms do not necessarily confirm carbon brush wear. Other electrical or mechanical components may be responsible for the problem.
Before ordering, compare the reference and dimensions of the original carbon brushes and check the compatibility information for your machine.
Replacement must be carried out according to the manufacturer's recommendations, with the necessary precautions for any work involving an electric motor.
Certain Parkside circular table saws share components with Scheppach machines. This is particularly the case for some references offered for the Scheppach HS110, HS111 and HS112 models.
This similarity can make it easier to find replacement parts when the original component has been accurately identified.
However, the same family of machines may include several production versions.
Switches, electrical components and guiding accessories may vary depending on the year of manufacture or manufacturer's reference.
A part compatible with a Scheppach HS110 is therefore not automatically compatible with every Parkside PTKS 2000 F4 table saw.
Each reference must be checked individually before placing an order.
To find the correct spare part for your Parkside table saw, we recommend checking the machine's identification plate and technical documentation.
Several details can help identify the correct component:
A visual comparison may be helpful, but it is not always sufficient to guarantee compatibility.
If you are unsure, it is better to check the references before ordering rather than install a potentially unsuitable component.
Different signs may indicate that a component of your Parkside saw needs inspection or replacement.
If the machine no longer starts, it may be necessary to inspect the power supply, switch and motor components.
If the motor has difficulty operating, a diagnosis may be required to determine whether the problem comes from a capacitor, worn carbon brushes or another component.
If angled cuts become difficult to adjust, check the condition of the mitre gauge and its locking mechanism.
A cracked table insert or bent riving knife requires immediate attention because of its role in the normal operating conditions of the saw.
It is important not to continue using a machine with a defect that could compromise safety.
Regular maintenance helps preserve the performance of your Parkside PTKS 2000 F4 circular table saw and reduces the risk of premature wear.
Before each use, inspect the saw blade, check that all safety devices are present, ensure that the controls operate correctly and verify that the machine is stable.
Also check the positioning of the riving knife and the condition of the table insert according to the manufacturer's instructions.
After use, disconnect the machine from the power supply and wait until the blade has stopped completely before carrying out permitted cleaning operations.
Regularly remove accumulated sawdust and wood dust from accessible areas, following the recommendations in the owner's manual.
A suitable dust extraction system helps reduce the accumulation of wood chips and dust during cutting operations.
Guides should be kept clean, and their adjustment mechanisms should remain in good working condition.
Finally, any damaged component must be replaced with a suitable part before the machine is returned to service.
At Probois Machinoutils, we specialise in woodworking machinery, accessories and spare parts for the maintenance and repair of workshop equipment.
We offer replacement parts for Parkside and Scheppach circular table saws to help users extend the service life of their machines.
Our catalogue includes electrical components, guiding accessories and parts associated with the cutting system.
Each product page provides the available information about the part reference and compatible models to help you identify the component you need.
By choosing to repair your equipment whenever technically possible, you can continue using your circular table saw for longer and avoid premature replacement.
Whether you are looking for a 4-pole or 6-pole switch, mitre gauge, motor capacitor, riving knife, table insert or pair of carbon brushes, discover our selection of replacement parts for Parkside circular table saws and compatible Scheppach models.
Before ordering, always check the exact reference of your machine and the specifications of the original component.
Probois Machinoutils helps you maintain and repair your Parkside PTKS 2000 F4 table saw with a selection of spare parts designed to preserve the performance and service life of your woodworking equipment.