Parts for Mac Allister table saw

Parts for Mac Allister table saw - Probois Machinoutils

Active filters

Mac Allister Table Saw Spare Parts: Repair and Maintain Your Machine

Discover our selection of spare parts for Mac Allister table saws, designed to help you repair, maintain and extend the service life of your woodworking machine. Table saws are essential tools in woodworking workshops and for DIY projects. They allow users to perform straight cuts, rip cuts, crosscuts and various cutting operations on wooden boards and panels.

At Probois Machinoutils, we offer a range of replacement components for Mac Allister MAC 1800W and MAC 210MM table saws, including electric motors, switches, armatures, circuit breakers, blade guards, table inserts and mechanical components for compatible models.

An electrical fault or a worn mechanical component does not necessarily mean that the entire table saw needs to be replaced. When a repair is possible and economically worthwhile, replacing the defective part can help keep your machine operational while avoiding the expense of purchasing new equipment.

Spare Parts for Mac Allister MAC 1800W and MAC 210MM Table Saws

Mac Allister table saws are used for various woodworking, interior renovation and DIY applications. They are designed to cut wooden boards, wood-based panels and other materials compatible with the machine and the saw blade being used.

The Mac Allister MAC 1800W and MAC 210MM models are among the machines covered by this spare parts category.

Depending on their design, table saws contain several mechanical and electrical assemblies:

  • An electric motor that drives the saw blade.
  • A switch for starting and stopping the machine.
  • An electrical protection system suited to the machine.
  • A blade shaft and blade fastening components.
  • A blade guard and other safety devices.
  • A table insert surrounding the blade opening.
  • Blade height and tilt adjustment mechanisms.
  • Fences and accessories for positioning wooden workpieces.

These components may vary according to the manufacturing version. It is therefore essential to check the exact machine reference before ordering a replacement part.

Electric Motors for Mac Allister Table Saws

The electric motor of a Mac Allister table saw is one of the machine's main components. It drives the saw blade and provides the power required for cutting operations.

A faulty motor may cause starting difficulties, loss of power, unusual noises or complete machine failure.

Our catalogue includes the 230 V electric motor, reference 3901304010, offered for various Scheppach HS100L, Dexter, Woodstar, Mac Allister and Toolson table saws.

We also offer the electric motor, reference 3901309010, intended for certain Scheppach HS80 table saws and compatible models from other brands.

Before ordering a replacement motor, it is essential to check the manufacturer's part number, electrical specifications, dimensions, mounting system and compatibility with your exact table saw model.

A motor that looks similar to the original component is not necessarily interchangeable. Motor replacement must always be carried out in accordance with the manufacturer's instructions and applicable electrical safety requirements.

Motor Armatures for Mac Allister Table Saws

The motor armature is an essential component in electric motors that use this type of construction. It contributes to converting electrical energy into rotational movement.

Over time, an armature may develop wear or electrical faults that affect motor performance.

Possible symptoms include starting difficulties, abnormal sparking, loss of power or irregular operation.

Our selection includes a motor armature, diagram position 103, offered for Scheppach HS80, TS205 and Woodster ST8 table saws.

To determine whether this armature is suitable for a Mac Allister table saw, the original part reference and motor specifications must be carefully compared.

Before replacing the armature, other components that could be responsible for the fault should also be inspected, including motor carbon brushes where fitted, electrical connections and control components.

Electrical diagnosis should be performed by a qualified person to avoid inappropriate repairs and potential safety hazards.

Switches for Mac Allister Table Saws

The table saw switch for Mac Allister machines controls motor starting and stopping. It is an important component for both operation and machine safety.

With regular use, a switch may show signs of wear or develop an electrical fault.

A button that no longer operates correctly, a machine that fails to start or a damaged control assembly may indicate that the switch needs to be inspected.

We offer the KJD17B-4 switch, 230 V, listed for certain Woodstar ST8 and Scheppach HS80 table saws.

Before ordering this switch for a Mac Allister table saw, it is essential to check its electrical ratings, dimensions, connections and original component reference.

Replacement must follow the wiring arrangement specified by the manufacturer. All electrical work must be carried out with the machine disconnected from the power supply and by someone with the appropriate technical knowledge.

Circuit Breakers and Electrical Protection for Table Saws

Circuit breakers and electrical protection devices for table saws help protect electrical circuits and certain machine components against abnormal operating conditions.

Depending on the machine design, these devices may operate in the event of an overload or an electrical fault requiring power interruption.

Our catalogue includes a circuit breaker for various Scheppach, Woodster, Parkside and Dexter machines, including certain table saws, planer thicknessers and router tables.

A protection device that trips repeatedly should not simply be replaced without investigating the underlying cause. Motor overload, electrical faults or mechanical problems may also trigger the protection system.

Before ordering an electrical protection component for your Mac Allister saw, check the rated specifications and compatibility information provided on the product page.

Never bypass or disable a safety device in order to continue using a faulty machine.

Blade Guards for Mac Allister Table Saws

The blade guard on a table saw is an essential safety component. It helps reduce the risk of accidental contact with the exposed section of the saw blade during cutting operations.

A cracked, broken, deformed or incomplete blade guard must be replaced with a suitable component before the machine is used again.

Our catalogue includes a complete blade guard for Scheppach HS80, TS205 and Woodster ST8 table saws, corresponding to diagram positions 10, 17, 29, 78 and 145 on the relevant machines.

This type of protective assembly may also be listed for certain machines from other brands, including Dexter and Kity.

For a Mac Allister table saw, the mounting points, dimensions and exact compatibility must be verified before ordering.

The blade guard must move and operate correctly without interfering with the blade or workpiece under normal operating conditions.

A table saw must not be used with a missing or defective safety guard.

Table Inserts and Blade Throat Plates for Mac Allister Table Saws

The table insert for a circular table saw, also known as a blade throat plate, is positioned around the opening through which the saw blade passes through the worktable.

It completes the table surface close to the blade and helps support wooden workpieces during cutting.

A broken, deformed or excessively damaged table insert can interfere with the movement of workpieces and affect cutting quality.

We offer the table insert, reference 3901309092, intended for the Scheppach HS80 table saw.

To determine whether this insert can be fitted to a Mac Allister table saw, its length, width, thickness, shape and fixing system must be compared with the original component.

A table insert must be correctly positioned and securely retained in the worktable. It must not protrude dangerously or come into contact with the saw blade during operation.

Fixing Screws and Small Mechanical Parts for Table Saws

Fixing screws and fasteners for table saws are used to assemble and secure various machine components.

Although these parts are generally small, they play an important role in the stability and correct operation of mechanical assemblies.

Our catalogue includes an M4 x 8 mm countersunk screw, offered under references 1902403088 and 02096503 for certain Scheppach table saws.

We also offer various fastening components intended for compatible cutting machines.

Before replacing a screw, it is important to check its diameter, length, thread pitch, head type and the specifications required for its installation position.

Components used to secure the saw blade or a safety device require particular attention. An unsuitable screw must never be used instead of a fastener specified by the manufacturer.

Compatibility with Scheppach, Woodstar, Dexter and Kity Table Saws

Some Mac Allister table saw spare parts may correspond to components also used on Scheppach, Woodstar, Dexter, Kity or Toolson machines.

This can make it easier to find replacement parts when original components are no longer available under the Mac Allister brand.

Our catalogue includes electric motors, switches, armatures, blade guards and mechanical components also listed for various table saws from these manufacturers.

Models associated with certain parts in our selection include the Scheppach HS80, HS100L and TS205, as well as the Woodster ST8.

However, two table saws with a similar appearance do not necessarily use identical components. Differences may exist in motor specifications, mounting points, dimensions and electrical systems.

Compatibility must therefore always be verified using the manufacturer's part number and the information provided on each product page.

A replacement part intended for a Scheppach or Woodstar table saw should never automatically be considered compatible with every Mac Allister table saw.

How to Identify the Correct Mac Allister Table Saw Spare Part

To order the correct replacement part for your Mac Allister table saw, it is important to check the information displayed on the machine's identification plate.

We recommend verifying the following details:

  • Brand: Mac Allister.
  • Model: MAC 1800W, MAC 210MM or another reference.
  • Serial number: useful for identifying certain manufacturing versions.
  • Manufacturer's part number: when indicated on the component or in the instruction manual.
  • Dimensions: essential for table inserts, screws, guards and mechanical components.
  • Electrical specifications: voltage, power and other relevant ratings for motors and switches.
  • Exploded parts diagram: useful for identifying the correct component position.

A photograph of the original component may also help with identification, especially when the part number is missing or no longer readable.

For electrical components, it is particularly important not to rely solely on appearance. Two switches or motors with similar dimensions may have different electrical specifications.

If you are unsure, it is always preferable to confirm compatibility before placing an order.

Maintaining Your Mac Allister Table Saw to Prevent Breakdowns

Regular maintenance helps preserve the performance of your Mac Allister table saw and reduces the risk of premature breakdowns.

Sawing operations generate wood chips and dust that may accumulate around the motor, beneath the worktable and inside adjustment mechanisms.

It is therefore advisable to clean accessible parts of the machine regularly and check that all safety devices operate correctly.

Recommended maintenance operations include:

  • Cleaning the worktable and accessible machine components.
  • Removing accumulated sawdust and wood chips.
  • Inspecting the condition of the saw blade.
  • Checking the blade guard.
  • Inspecting the riving knife where fitted.
  • Checking the table insert.
  • Inspecting fences and adjustment mechanisms.
  • Monitoring unusual vibrations and noises.
  • Visually checking the power cable and machine controls.

Before carrying out cleaning, adjustments or maintenance, the saw must be switched off and disconnected from the electrical supply.

It is also important to follow the safety instructions in the user manual and never operate a saw with a defect that could compromise operator safety.

When Should You Replace a Mac Allister Table Saw Part?

Several warning signs may indicate that a Mac Allister table saw component needs inspection or replacement.

A machine that no longer starts may have a power supply problem, a defective switch, an electrical protection fault or a motor problem.

Loss of power, unusual smells or abnormal noises may also indicate a fault requiring further diagnosis.

A damaged blade guard, broken table insert or defective fastening component should be repaired or replaced before the machine is used again.

It is important to distinguish normal wear from an actual mechanical or electrical fault. Replacing a component without identifying the cause does not guarantee that the problem will be resolved.

For electrical repairs and work involving safety-critical components, assistance from a qualified professional is recommended.

Why Repair a Mac Allister Table Saw Instead of Replacing It?

Replacing a Mac Allister table saw spare part can be an economical solution when the machine is otherwise in good working condition.

A faulty switch, damaged table insert or worn mechanical component does not necessarily require purchasing an entirely new saw.

When a repair can be completed correctly and safely, it helps extend the machine's service life and allows users to continue working with equipment whose settings and operating characteristics they already know.

This approach also helps reduce premature equipment replacement and the waste associated with renewing woodworking machinery.

Buy Mac Allister Table Saw Spare Parts at Probois Machinoutils

At Probois Machinoutils, we offer a selection of spare parts for Mac Allister MAC 1800W and MAC 210MM table saws to make maintenance and repair easier.

Discover our range of electric motors, switches, motor armatures, circuit breakers, blade guards, table inserts and small mechanical components for compatible models.

Our catalogue also includes components listed for certain Scheppach, Woodstar, Dexter, Kity and Toolson table saws, some of which may correspond to Mac Allister machines.

Each product page provides available references and compatibility information to help you identify the correct replacement part before ordering.

If you cannot find the component required for your Mac Allister table saw, please contact our customer service team with the exact machine model and, whenever possible, a photograph of the part you need to replace.

Explore our selection of Mac Allister spare parts and find the components needed to maintain your table saw, carry out suitable repairs and extend the service life of your woodworking equipment.