Filter By

Brand

Brand

Price

Price

  • €0.00 - €119.00

Availability

Availability

Special Products

Special Products

Metal lathe with 3-axis digital display ES-12 V Bernardo Master 165 Pro - 400V

Metal lathe with 3-axis...

€4,997.80 €5,997.80
Metal Lathe Bernardo Master 165 Pro - 400V

Metal Lathe Bernardo Master...

€4,797.80 €5,597.80
Metal lathe and milling machine Bernardo Proficenter 880 G Vario

Metal lathe and milling...

€4,697.80 €5,697.80
All Products

Spare Parts for 32.6 cc garden tools and brush cutters

Spare Parts for 32.6 cc garden tools and brush cutters - Probois

Active filters

Looking for spare parts for 32.6 cc garden tools and brush cutters? In this category, you will find a wide selection of replacement parts for maintaining and repairing your petrol brush cutters and 4-in-1 multifunction garden tools.

This category includes numerous mechanical, engine and wear parts for various 32.6 cc models, including the Scheppach MFH3300-4P, MFH300-4BP and BCH4300, as well as various models sold under the Woodster brand.

All the parts you need to repair your 32.6 cc garden tool

Petrol garden tools contain many components that are subject to wear, vibration and mechanical stress. A fault does not necessarily mean that the entire machine needs to be replaced: in many cases, replacing the defective part is enough to extend its service life.

This category includes:

  • carburettors and intake parts;
  • ignition coils and spark plugs;
  • recoil starters;
  • air filters and fuel filters;
  • fuel tanks, caps and fuel hoses;
  • pistons, piston rings, cylinders and bearings;
  • clutches and clutch pulleys;
  • exhausts and engine parts;
  • drive shafts and flexible drive shafts;
  • handles and throttle controls;
  • connectors, locking mechanisms and coupling parts;
  • strimmer heads and brush cutter blades;
  • parts for hedge trimmer attachments;
  • parts for pole saw attachments;
  • harnesses and support accessories.

With dozens of references available, this category makes it possible to find both small maintenance parts and complete mechanical assemblies for 32.6 cc garden tools.

Engine parts for 32.6 cc brush cutters and garden tools

Petrol engines are subjected to considerable stress during use. Vibration, heat and wear may eventually require certain components to be replaced.

Find pistons, piston rings, piston pins, cylinders, needle bearings, gaskets, exhausts and other engine parts to repair your garden tool.

Before ordering, it is essential to check the exact model of the machine and, where necessary, its manufacturing date. A part designed for one 32.6 cc garden tool may not necessarily fit every machine with the same engine capacity.

Carburettors, filters and fuel system parts

An engine that is difficult to start, stalls, lacks power or runs irregularly may have a problem with the fuel supply or air intake system.

This category includes:

  • carburettors;
  • intake manifolds and intake parts;
  • carburettor gaskets;
  • complete air filters;
  • air filter bases and covers;
  • fuel filters;
  • primer bulbs;
  • fuel tanks;
  • fuel tank caps;
  • fuel hoses.

These parts can be used to maintain and repair the fuel systems of 32.6 cc Scheppach and Woodster petrol brush cutters and multifunction garden tools.

Ignition and starting parts

A petrol garden tool that no longer starts may have a problem with the spark plug, ignition coil, recoil starter or fuel supply.

In this category, you will find various ignition coils, spark plugs and recoil starters to repair your brush cutter or multifunction garden tool.

To choose the correct part, always check the original part number, the machine model and its manufacturing date when this information is specified on the product page.

Transmission and clutch parts

The transmission transfers power from the engine to the cutting attachment. Wear or breakage can cause loss of drive, abnormal vibrations or complete failure of the attachment.

You will find:

  • clutches;
  • clutch pulleys;
  • drive shafts;
  • flexible drive shafts;
  • aluminium tubes and shafts;
  • drive shaft assemblies;
  • connectors and coupling locks.

These parts can be used to repair the various transmission components of brush cutters and 4-in-1 multifunction garden tools.

Parts for the brush cutter attachment

To maintain and repair the brush cutter function of your garden tool, this category includes various cutting components and mechanical parts:

  • strimmer heads;
  • 3-tooth, 8-tooth and 40-tooth blades;
  • nuts and clamping flanges;
  • debris guards and protective covers;
  • guard supports;
  • drive shaft ends and transmission parts.

Replacing a worn cutting head, blade or transmission component helps maintain efficient and safe machine operation.

Parts for the pole saw attachment of 4-in-1 garden tools

Scheppach and Woodster multifunction garden tools can be equipped with a pole saw attachment. Find the parts required for its maintenance and repair:

  • guide bars;
  • chain tensioners;
  • oil tanks;
  • chainsaw housings;
  • complete pole saw attachments;
  • transmission and fastening parts.

These components allow a broken or worn part to be replaced without having to replace the entire multifunction garden tool.

Parts for the hedge trimmer attachment

This category also includes various parts for hedge trimmer attachments fitted to 4-in-1 garden tools:

  • hedge trimmer blades;
  • gaskets;
  • gears;
  • gear shafts;
  • complete hedge trimmer attachments.

A damaged blade, worn gear or defective transmission part can reduce hedge trimmer performance. Replacing the affected component helps extend the service life of the attachment.

Spare parts for Scheppach, Woodster and selected Parkside garden tools

Many parts in this category are designed for Scheppach and Woodster garden tools. Some references may also fit Parkside machines manufactured by Scheppach, including selected PBK4B3 models.

Please note: compatibility with a Parkside model does not mean that the part fits every machine sold under the same model name. Some versions may have been manufactured by different suppliers and may use different components. It is therefore essential to check the compatibility list provided on each product page.

How to choose the correct part for your 32.6 cc garden tool

Before ordering a spare part, we recommend checking:

  • the exact model of your machine;
  • the engine capacity;
  • the reference number of the required part;
  • the machine rating plate;
  • the serial number;
  • the month and year of manufacture, when this information is required.

Depending on the production period, the same machine model may have been fitted with different parts. Always check the list of compatible machines shown on the spare part product page before purchasing.

Repair your brush cutter and multifunction garden tool

With our selection of spare parts for 32.6 cc garden tools and brush cutters, you can replace worn or damaged components and extend the service life of your machine.

Engine parts, carburettors, ignition components, transmission parts, handles, fuel tanks, brush cutter parts, pole saw parts and hedge trimmer parts: find the main components required to maintain and repair your Scheppach and Woodster garden tools.