Set of 2 planer knives 210 mm for Planer and thicknesser Scheppach HMS850 serie n° 0109
Screw for the pulley reference 3902202059 mounted on the 204 mm width joiners Kity Scheppach and Woodstar
Crank mark 16 for various planer and thicknessers Scheppach and Woodster in width 204 mm
Crank stop mark 17 for different planer and thicknessers Scheppach and Woodster in width 204 mm
Clutch pinion item 70 for planer thicknesser Scheppach HMS850 with serial number starting with 0109
Tension spring for various planer and thicknessers Scheppach and Woodster in width 204 mm (part n ° 76) and Zipper
Feed roller for Planer thicknesser Scheppach HMS850 with series n° 0115 only !
Friction ring for planer and thicknesser Scheppach and Woodster
Unit tightening wedge for 204 mm thicknessers Kity Scheppach and Woodstar whose serial number begins with 0115 ...
Shaft for 204 mm Scheppach and Woodstar planer thicknesser with serial numbers starting with 0115...
Axis for the shaft of the planer planers width 204 mm of the Kity, Scheppach and Woodstar brands manufactured before May 2020
M4x10 mm blade adjustment screw for various Scheppach and Woodster planer thicknessers in widths of 204 and 254 mm
Needle bearing for various planer and thicknessers Scheppach and Woodster in width 204 mm
Knife protector for planer and thicknesser Scheppach HMS850
Crank mark 151 for various planer and thicknessers Scheppach and Woodster in width 204 mm
Chip ejection hood for various Scheppach and Woodster planer thicknessers in 204 mm width
Part number 158 for safety and starting for various Scheppach and Woodster planer thicknessers in 204 mm width
Pulley for planers and planers width 204 mm of the Kity, Scheppach and Woodstar brand manufactured from 2006 onwards
Socket (piece 136) for Planer thicknesser Scheppach HMS1070 with series n° 0109 only !
Capacitor for Kity PT8500 et Woodstar PT85
1500W motor for thicknesser planer Scheppach HMS1070 and Scheppach HMS850 serie n° 0109 only !
Scale for planer and thicknesser Scheppach HMS850, HMS2000 and HT850
Blade clamp for 204 mm thicknessers Kity Scheppach and Woodstar whose serial number begins with 0109 ...
Tensioning mechanism for various small planer jointers
Switch for thicknesser Kity Scheppach Woodstar 204 mm
Feed roller for Planer thicknesser Scheppach HMS850 with series n° 0109 only !
Roller mark 100 for Scheppach HMS850 thicknesser and planer with serial number starting with 0115
Bearing housing reference 3902202081, item 114, for Scheppach HMS850, HMS860, HT850, HMS2000, Kity PT8500, Woodstar PT85, Fox F22564-200, Bernardo PT200ED and Parkside PADM1250A1 planer thicknessers.
```html
Are you looking for spare parts for your Mac Allister MPTP1500B planer thicknesser? At Probois Machinoutils, we offer a selection of replacement parts, mechanical components and accessories designed to help you maintain, service and repair your woodworking machine.
The Mac Allister MPTP1500B is a combined planer thicknesser designed for two essential woodworking operations: surface planing to produce flat, straight timber surfaces and thicknessing to achieve a consistent board thickness. Over time, certain mechanical parts may wear out, become damaged or require replacement to maintain reliable operation.
Our range of Mac Allister MPTP1500B replacement parts includes various components such as planer blades, drive belts, feed rollers, pulleys, gears, bearings, adjustment handles and safety-related parts. Always check the specifications and compatibility information provided on each product page before ordering.
Planer blades for the Mac Allister MPTP1500B are essential for achieving smooth, accurate results when planing or thicknessing timber. These cutting components remove material from the wood as it passes through the machine, directly affecting the quality of the finished surface.
Blunt, chipped or incorrectly adjusted planer knives can cause rough finishes, torn grain, excessive vibrations and increased cutting resistance. Replacing worn blades helps restore cutting performance and reduces unnecessary strain on the machine.
When selecting replacement planer blades, carefully check their length, width, thickness and fixing system. Blades with similar dimensions are not necessarily interchangeable. Blade clamping components and adjustment screws should also be inspected to ensure safe and accurate installation.
The Mac Allister planer thicknesser drive belt transfers power between the motor and the machine's mechanical components. A worn, stretched or damaged belt can lead to slipping, unusual noises, reduced performance or irregular operation.
Drive belts may deteriorate through normal use, excessive tension, heat or mechanical misalignment. Common warning signs include visible cracking, frayed edges, damaged ribs or a loss of power transmission.
When replacing a Mac Allister MPTP1500B drive belt, compare the original belt's profile, length, width and number of ribs with the replacement specifications. Choosing the correct belt is important for maintaining reliable transmission and preventing premature wear.
The feed mechanism plays an important role in the thicknessing operation. Planer thicknesser feed rollers move timber through the machine at a controlled speed, helping achieve a consistent finish.
Worn, dirty or damaged feed rollers may cause timber to stop moving, feed unevenly or develop marks on its surface. Other components, including friction rings, drive gears, tension springs and feed mechanisms, may also affect the operation of the thicknesser.
If your Mac Allister MPTP1500B is not feeding timber correctly, inspect the transmission system before replacing individual components. The problem may involve a worn belt, damaged gear, faulty friction component, dirty roller or incorrect adjustment.
Pulleys, shafts, bearings and bearing housings contribute to the smooth operation of the planer thicknesser's mechanical systems. These components must remain in good condition to ensure reliable rotation and minimise excessive vibration.
Worn bearings may produce grinding noises, overheating or unwanted movement. Damaged pulleys can cause belt misalignment, slipping or premature transmission wear.
Our selection of Mac Allister woodworking machine spare parts helps users identify suitable mechanical replacement components, subject to the dimensions and compatibility information specified for each item.
Accurate adjustment is essential when using a combined planer thicknesser. The machine's height adjustment handles, handwheels, screws and positioning components allow users to control the cutting depth and thicknessing settings.
Broken or worn adjustment parts may make the machine difficult to operate or prevent precise positioning. Replacement handles, knobs, sleeves and adjustment components can help restore normal operation.
Before ordering a Mac Allister MPTP1500B adjustment part, compare the original component's dimensions, fixing method and shape with the replacement product.
Some planer thicknesser problems may involve electrical components or safety devices. A faulty power switch, motor capacitor or safety interlock can prevent the machine from starting or cause irregular operation.
Electrical replacement parts must match the original specifications, including voltage, electrical ratings, connection type and safety requirements.
Never bypass a safety switch or protective device. Electrical repairs should be carried out by a suitably qualified person, with the machine disconnected from the power supply.
Finding the correct Mac Allister MPTP1500B spare part begins with identifying the exact machine model. Check the identification plate for the complete model reference and serial number.
Whenever possible, consult the machine's instruction manual or exploded parts diagram to locate the original part number. Compare the replacement component's dimensions, appearance, technical specifications and fixing system before ordering.
Some components used on Scheppach, Kity and Woodstar planer thicknessers may look similar to parts fitted to other woodworking machines. However, visual similarities do not guarantee compatibility with the Mac Allister MPTP1500B.
Always refer to the compatibility details provided on the individual product page.
Regular maintenance helps extend the service life of your Mac Allister MPTP1500B planer thicknesser and reduces the risk of unexpected breakdowns.
Common signs of wear include poor surface finishes, uneven timber feeding, slipping belts, unusual mechanical noises, excessive vibration, difficulty adjusting the cutting height or problems starting the motor.
Inspect the planer blades, drive belts, feed rollers, adjustment mechanisms and safety components regularly. Remove accumulated wood chips and dust, keep the tables clean and ensure that moving parts operate correctly.
Always disconnect the machine from the electrical supply before carrying out maintenance or replacing parts. Damaged safety components must be replaced before the machine is used again.
Probois Machinoutils specialises in woodworking machinery, accessories and replacement parts for a wide range of workshop equipment.
Our catalogue includes spare parts for planer thicknessers, table saws, bandsaws, sanding machines and other woodworking tools from various manufacturers.
Replacing a worn or damaged component can be a practical and economical alternative to purchasing a new machine. Repairing your equipment also helps extend its working life and reduce unnecessary waste.
Browse our selection of Mac Allister MPTP1500B planer thicknesser spare parts and check the individual product specifications to identify the correct replacement components for your machine.
Where can I buy Mac Allister MPTP1500B spare parts?
Probois Machinoutils offers a selection of replacement parts for woodworking machines, including mechanical, cutting, transmission and adjustment components. Check each product's compatibility before ordering.
Which drive belt fits the Mac Allister MPTP1500B?
The replacement drive belt must match the original belt's profile, dimensions and technical specifications. Check the original reference before purchasing.
How do I choose replacement planer blades?
Measure the original blades carefully and check their length, width, thickness and fixing system. Similar-looking blades may not be interchangeable.
Why is my Mac Allister planer thicknesser not feeding wood?
Possible causes include worn feed rollers, damaged drive belts, faulty gears, friction components or accumulated wood dust. Inspect the feed mechanism to identify the cause.
Are Scheppach spare parts compatible with Mac Allister MPTP1500B?
Certain components may be similar or shared between machines, but compatibility must always be confirmed using the original part number, dimensions and product specifications.
```
