Exhaust pipe reference 5912306058 for Scheppach, Woodstar and Parkside lawnmowers, high pressure cleaners and tillers according to the following list : LIST OF COMPATIBLE MACHINES
Belt reference 5912306016 for Scheppach MTP560, LB160 and MTP570 two-wheel tractor
Right outer knife reference 5912306002 and mark 2 for Scheppach tiller
Engine support reference 5912306065 mark 27 for Scheppach MTP560, MTP570 and LB160 motor cultivator
Straight rotary knife reference 5912306003 and mark 3 for Scheppach MTP560, MTP570, LB160 tiller
Accelerator cable with lever reference 5912306022 marks 39-44 and 46, for Scheppach MTP560, MTP570 and LB160 tiller
Drive disc for belt reference 3912303024 for Scheppach MB360, MTP360 and LB160 tiller
Replacement rotary knife for left side reference 5912306009 mark 8 for Scheppach tiller
Exterior knife left side reference 5912306008 mark 9 for Scheppach tiller
Spark plug reference 3904601090 for Scheppach and Woodster lawn mowers and machines
Fuel hose reference 5904602028 for Scheppach mower, tiller and vibrating plate
Air filter reference 5911249030 for Scheppach and Woodster mowers
Carburettor reference 5912311011 for Scheppach mower and tiller (5911249031)
Exhaust reference 5911247061 for Scheppach and Parkside lawnmowers and cultivators according to the following list: LIST OF COMPATIBLE MACHINES
Tension spring 5911238046 for Scheppach and Woodster mower
Fuel tank reference 5911249037 for Scheppach mowers and tillers
Fuel tank cap reference 5911240031 for Scheppach lawn mowers
Exhaust gasket reference 5911247066 for Scheppach mower and tiller
Spark plug wrench with lug reference 3904601093 for Scheppach and Parkside machines
Launcher reference 5911249035 for Scheppach and Woodster lawn mowers
Fuel hose Ref. 5912311020 for Scheppach, Parkside and Woodster lawn mowers – Replaces Ref. 5911249041
Engine drive pulley for Scheppach MTP560, MTP570, LB160 tiller
Complete clutch lever reference 5912306019 marks 29-34, for Scheppach tiller
Mower attachment reference 3911201013 for Scheppach and Woodster lawn mowers
Are you looking for a spare part for your Parkside PBGK 1400 C3 garden tiller to repair your machine or replace a worn component? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of this petrol-powered Parkside garden tiller, designed for soil cultivation and ground preparation.
The Parkside PBGK 1400 C3 is a gardening machine used to cultivate vegetable gardens, prepare planting areas and loosen previously worked soil. Like any motorised gardening equipment, it contains mechanical components and engine parts that may wear over time.
Our catalogue includes drive belts, rotary tiller blades, pulleys, clutch levers, throttle cables, carburettors, spark plugs, fuel tanks and fuel hoses. Some of these components are also used on Scheppach garden tillers, including the MTP560, MTP570 and LB160 models.
Before ordering, it is essential to check the exact part number and its compatibility with your machine.
A garden tiller is subjected to considerable mechanical stress when cultivating soil. The rotary blades must penetrate and turn the ground, while the engine transfers power to the drive mechanism.
Depending on soil conditions, frequency of use and maintenance, certain components may gradually wear out. Compacted soil, stones, roots and foreign objects can also place significant strain on the working parts.
A worn garden tiller drive belt may cause a loss of drive, while a bent rotary blade can reduce cultivation efficiency. Starting difficulties may be caused by the spark plug, carburettor or fuel supply system.
Replacing only the faulty component can often extend the service life of your equipment and avoid the need to purchase an entirely new machine.
The garden tiller drive belt transfers movement between the engine and the drive mechanism. It therefore plays an essential role in operating the rotary blades and transmitting engine power.
Our catalogue includes the Z640 drive belt, reference 5912306016, offered for Scheppach MTP560, MTP570 and LB160 garden tillers. Its compatibility with the Parkside PBGK 1400 C3 must be checked against the original part reference.
A drive belt may need replacing when it shows cracks, visible damage, excessive stretching or loss of grip.
If the rotary blades no longer turn correctly while the engine is running, it may be necessary to inspect the belt, its tension and the condition of the pulleys.
It is also recommended to check the alignment of the transmission components before fitting a new belt to prevent premature wear.
The rotary tiller blades for Parkside garden tillers are the main working components of the machine. They penetrate the soil, help loosen compacted earth, break up clods and prepare the ground before sowing or planting.
These components are particularly exposed to friction and impacts. Their condition directly affects the quality of soil cultivation.
Our selection includes several replacement blades for Scheppach garden tillers and compatible models:
These references are associated in particular with the Scheppach MTP560, MTP570 and LB160 garden tillers. Their compatibility with the Parkside model must be confirmed before purchasing.
When replacing a tiller blade, it is important to respect its installation direction, position on the rotor and the fasteners specified by the manufacturer.
A cracked, severely bent or excessively worn blade should be replaced to maintain the correct operation of the rotary cultivation system.
The garden tiller drive pulley helps transmit movement from the engine to the working mechanism.
Our range includes the engine pulley, reference 5912306017, corresponding to position 22 on certain compatible Scheppach and Parkside garden tillers.
We also offer the belt drive disc, reference 3912303024, intended for certain Scheppach models.
A damaged or misaligned pulley, or one with a worn groove, can accelerate belt wear and interfere with power transmission.
If a drive belt repeatedly slips off or wears unusually quickly, it is advisable to inspect the entire transmission mechanism rather than simply replacing the belt.
The garden tiller's controls allow the operator to manage engine operation and engage the drive mechanism.
The garden tiller clutch lever controls the transmission engagement. A broken, bent or malfunctioning lever may prevent the machine from being operated correctly.
Our catalogue includes the complete clutch lever, reference 5912306019, corresponding to positions 29 to 34 on certain Scheppach and Parkside garden tillers.
The throttle cable with lever, reference 5912306022, is also available for several compatible Scheppach models.
A seized, stretched or damaged cable can make throttle control difficult or inaccurate. Its routing, attachment points and operation should be checked before replacement.
All controls must operate and return to their intended positions in accordance with the manufacturer's instructions. A machine whose clutch does not disengage correctly must not be used.
The carburettor of a petrol garden tiller prepares the air-fuel mixture required for the combustion engine to operate.
Over time, deposits can accumulate in the fuel system, particularly when petrol remains in the tank or carburettor for extended periods.
A dirty carburettor may cause starting difficulties, unstable idling, loss of power or unexpected engine shutdowns.
Our selection includes the carburettor, reference 5912311011, which replaces reference 5911249031 for certain Scheppach lawnmowers and garden tillers.
Before ordering a carburettor for the Parkside PBGK 1400 C3, it is essential to compare the original part number, mounting points and compatibility information.
It is also advisable to inspect the air filter, fuel hoses and fuel supply system to avoid unnecessarily replacing a carburettor that is still functioning correctly.
The garden tiller spark plug produces the spark needed to ignite the air-fuel mixture inside the petrol engine.
A dirty, worn or incorrectly gapped spark plug can cause starting problems and irregular engine operation.
We offer the F7RTC spark plug, reference 3904601090, used on certain Scheppach and Woodster petrol-powered machines.
Its compatibility with the Parkside PBGK 1400 C3 engine must be confirmed before installation.
During maintenance, it is also recommended to check the air filter, general engine condition and the servicing operations specified in the owner's manual.
A properly maintained engine is more likely to operate consistently and reduces the risk of failures caused by inadequate maintenance.
The fuel supply system must remain in good condition to ensure correct engine operation and prevent fuel leaks.
Our selection includes the petrol fuel tank, reference 5911249037, offered for certain Scheppach and Parkside lawnmowers and garden tillers.
The fuel tank cap, reference 5911240031, replacing reference 5911224009, is also among the spare parts available for several compatible machines.
Various fuel hoses are available, including references 5904602028 and 5912311020, depending on the application.
A cracked, hardened or leaking fuel hose must be replaced with a suitable component. It is important to respect the dimensions, connections and compatibility with the fuel used.
Work on the petrol supply system must only be carried out with the engine switched off and cooled down, in a properly ventilated area away from flames and sources of sparks.
The exhaust muffler of a garden tiller allows combustion gases to escape and helps reduce the noise produced by the engine.
A damaged exhaust system may cause increased noise, vibrations or exhaust gas leaks.
Our catalogue includes exhaust mufflers, references 5912306058 and 5911247061, intended for certain Scheppach, Woodster and Parkside petrol-powered machines according to their compatibility lists.
We also offer the exhaust gasket, reference 5911247066, for certain Scheppach machines.
It is essential to check the shape, dimensions and mounting points of the component before replacing it.
Exhaust components can reach extremely high temperatures. Any work must only be carried out after the engine has cooled completely.
When cultivating soil near established plants, plant protection discs for garden tillers can help prevent the rotary blades from coming into contact with vegetation growing alongside the cultivated area.
Our selection includes the plant protection disc, reference 5912306001, intended for certain compatible Scheppach and Parkside garden tillers.
This type of component can be particularly useful when working between vegetable garden rows or near existing plants, provided the machine's configuration allows it.
Before ordering, check the dimensions, mounting system and compatibility with your Parkside PBGK 1400 C3 garden tiller.
To order the correct replacement part for your Parkside garden tiller, it is important to check the information shown on the machine's identification plate.
We recommend checking the following details:
Some spare parts in this category are also listed for the Scheppach MTP560, MTP570 and LB160 garden tillers. However, similar part references do not necessarily mean that all components are interchangeable.
Each replacement part should therefore be checked individually before purchasing.
Several symptoms may indicate that your garden tiller requires maintenance or repair.
If the engine runs but the rotary blades do not turn normally, it may be useful to inspect the drive belt, pulleys and clutch mechanism.
If the machine struggles to cultivate the soil, produces unusual vibrations or leaves an uneven finish, the condition and installation of the rotary tiller blades should be checked.
Starting difficulties or an engine that stalls may require inspection of the spark plug, carburettor, air filter and fuel supply system.
Any petrol leak should result in the machine being stopped immediately until the fault has been identified and repaired.
These symptoms do not always identify the faulty component directly. A preliminary diagnosis is recommended to avoid unnecessary replacement of parts.
Regular maintenance helps preserve the performance of your Parkside PBGK 1400 C3 petrol garden tiller and reduce the risk of premature wear.
Before each use, check the engine oil level according to the owner's manual, the condition of the controls, fasteners and the absence of fuel leaks.
Also inspect the rotary tiller blades for deformation or damage caused by stones or other obstacles.
After use, wait until the machine has stopped completely and the engine has cooled before removing soil deposits from the working components.
Follow the maintenance intervals specified by the manufacturer, particularly for engine oil changes, air filter inspection and spark plug checks.
For extended storage periods, follow the manual's recommendations regarding fuel and engine preparation for winter storage.
A regularly maintained machine is more likely to operate reliably and helps reduce repairs associated with insufficient maintenance.
At Probois Machinoutils, we specialise in machinery and spare parts for gardening, DIY and workshop equipment.
We offer components for Parkside machines manufactured by Scheppach, as well as for numerous Scheppach and Woodster products.
Our catalogue includes engine, transmission, cultivation and control components, helping customers find the parts required to repair their equipment.
Each product page provides available information about the component, its reference numbers and compatible machines to help you make the correct choice.
By replacing a worn or damaged component whenever repair is possible, you can extend the service life of your garden tiller and avoid prematurely replacing the entire machine.
Whether you are looking for a drive belt, right or left rotary tiller blade, engine pulley, clutch lever, carburettor, spark plug or fuel hose, discover our selection of replacement parts for compatible Parkside and Scheppach garden tillers.
Before placing an order, always check the exact model of your machine and the manufacturer's reference number of the required component.
Probois Machinoutils helps you maintain and repair your Parkside PBGK 1400 C3 garden tiller with a selection of spare parts designed to preserve the performance and service life of your gardening equipment.
