Flat Belt for scorer of the wood combined Jean l’ébéniste COMB250 et COMB305, leman COM250, Bernardo FK250F and CWM260F
Trapezoidal Belt for saw of the wood combined Jean l’ébéniste COMB250 et COMB305, leman COM250, Bernardo FK250F and CWM260F
Trapezoidal Belt for spindle moulder of the wood combined Jean l’ébéniste COMB250 et COMB305, leman COM250, Bernardo FK250F and CWM260F
Belt for the saw and spindle moulder on Holzmann KF315VF-2000 and Leman COM310
Poly V belt 736J4 (290J) for the scoring saw on Holzmann KF315VF-2000 spindle moulder saw and TS315VF-2600 or TS315VF-3200 format saw, Leman COM310
This category is dedicated to spare parts for Leman combination woodworking machines, which combine several workshop operations in one machine. Depending on the model, these can include sawing, scoring, spindle moulding, surface planing and thicknessing. Such versatility involves many mechanical, drive, adjustment, safety and electrical components that may require servicing or replacement.
Availability changes with sourcing and discontinued references, so this page is not a fixed list of today's stock. It is designed as a long-term resource for maintaining, diagnosing and repairing Leman combination machines, including COM250 and COM310 machines whenever compatibility is confirmed.
The saw function includes shafts, flanges, clamping components, rise and tilt mechanisms, pulleys, belts, bearings and guides depending on the machine. Models fitted with a scoring unit also have a separate small saw assembly with its own drive, adjustment and support parts.
Blade misalignment, difficult height adjustment or vibration does not automatically mean that the saw shaft has failed. Inspect bearings, fasteners, flanges, pulleys, belts and adjustment mechanisms. For scoring-unit parts, identify the function and exploded-diagram item number precisely.
A combination machine can use several drive systems for its different functions. A belt may be dedicated to the main saw, scorer, spindle moulder or another mechanism. Do not select a belt from approximate length alone: section, width, number of ribs and drive arrangement must match the original.
If a belt slips, breaks prematurely or tracks incorrectly, check pulley alignment, tension and bearing condition before fitting a new belt. A replacement belt cannot correct an underlying mechanical fault.
Depending on the model, spindle-moulder servicing may involve the spindle, spacers, nuts and clamping parts, bearings, transmission, pulleys, height adjustment, fence or guards. Accurate identification is essential because these components support and position the tooling.
Unusual noise, spindle play or difficult height adjustment should be investigated before use. Never substitute a clamping component simply because it looks similar; spindle diameter, thread, tightening direction, dimensions and reference must match.
On Leman machines combining surface planing and thicknessing, the cutterhead, knives or other cutting components according to version, tables, feed rollers and their drive are repeatedly loaded. Wear or incorrect adjustment can affect finish quality, feed consistency and thickness accuracy.
If timber feeds irregularly, inspect the complete system. Depending on design, the cause may involve a belt, chain, sprocket, roller, spring, bearing, bush or chip accumulation. Cutting problems should also prompt checks of tool condition, adjustment and table stability.
Accuracy also depends on tables, fences and movement systems. The sliding table, stops, handles, handwheels, shafts, adjustment screws, slides and locking devices can develop wear or damage. A broken control may sometimes be the consequence of a mechanism that has become stiff.
Before forcing a handwheel or handle, look for contamination, loose fasteners, a bent shaft or seized mechanism. For carriage and fence parts, compare dimensions and the exploded-diagram item number whenever available.
Depending on model and version, the functions can be powered by one or more motors and controlled by specific electrical devices. Starting faults can involve the supply, switch, contactor, safety device, capacitor on a single-phase version, wiring or motor.
For electrical replacements, record machine voltage, component markings, terminal arrangement and reference. Never select a switch or contactor from appearance alone. Disconnect the machine before work and use a competent person for electrical repairs requiring specialist knowledge.
Blade guards, covers, fences, emergency stops, safety switches and other protective devices should never be bypassed to keep a faulty machine running. Depending on the model, changing configuration between functions or opening a cover may operate a safety device.
If a safety circuit prevents starting, identify the cause rather than bypassing it. Check mechanical operation, cover position and the exact component reference.
IMPORTANT: BEFORE PURCHASING, carefully check the list of compatible machines shown on each product page.
For some parts, the model name alone is not sufficient. Production changes can mean that Leman machines carrying the same model designation use different components.
If unsure, provide the exact model, month and year of manufacture and serial number. Also send the relevant function, exploded-diagram item number, clear photographs, dimensions and markings from the original part whenever possible.
Combination machines sold under different brands can occasionally share a belt or another component. Certain Leman parts may therefore be explicitly listed for Jean l'Ébéniste, Bernardo, Holzmann or other machines of similar design.
Probois Machinoutils – SEO pièces combinés à bois Leman Page 5
This must never be generalised. A shared saw belt does not prove that motors, shafts, switches, bearings or adjustment mechanisms are interchangeable. Rely only on the compatibility stated for the individual spare part.
On a complex combination machine, the exploded diagram is particularly valuable. First identify the affected function - saw, scorer, spindle moulder, planer thicknesser, sliding carriage or electrical section - then locate the component on the relevant drawing. The item number helps distinguish visually similar parts.
If the required part is not yet listed online, send the rating plate, an overall photograph of the affected area and clear pictures of the component. Measurements and readable references can also help identify a suitable replacement.
Routine maintenance helps preserve accuracy and reliability. With the machine disconnected, inspect accessible belts and drives, guards, fasteners and chip accumulation. Effective dust extraction is especially important around sawing, spindle moulding and planing functions.
Probois Machinoutils develops an evolving range of Leman combination woodworking machine spare parts. Available references can change over time, so accurate identification of the machine, version and affected function remains the best route to the correct component and a durable repair.
