Spare parts for Leman table saw

Spare parts for Leman table saw - Probois Machinoutils

Active filters

Spare Parts for Leman Table Saw

Find our selection of spare parts for Leman table saws, designed for the maintenance, repair and refurbishment of your woodworking machine.

This category includes parts for the Leman LOSST315 table saw, as well as components that may fit other Leman table saw models depending on compatibility.

A table saw contains numerous mechanical, electrical and safety components that can wear out or become damaged over time: table inserts, rip fences, riving knives, blade guards, adjustment handwheels, saw arbors, bearings, drive belts, pulleys, motors, switches and components for the table and carriage mechanisms.

Replacing worn or damaged parts can significantly extend the working life of a Leman table saw.

Spare parts for the Leman LOSST315 table saw

The Leman LOSST315 is a table saw designed for cutting and ripping timber and wood-based materials.

Like any woodworking saw used regularly, it requires appropriate maintenance to maintain cutting accuracy and reliable operation.

Some parts may be accidentally damaged, while others are subject to gradual wear during normal use.

We offer, in particular, a table insert for the Leman LOSST315, fitted around the saw blade in the machine table.

Our selection of Leman spare parts is continually evolving and may be expanded as additional replacement parts become available.

Table inserts for Leman table saws

The table insert, sometimes called a throat plate, is fitted into the opening in the saw table around the blade.

It closes the opening around the blade while providing the clearance required for the blade to rotate and pass through the table.

Over time, a table insert may become:

  • broken;

  • cracked;

  • distorted;

  • damaged by the saw blade;

  • incomplete;

  • incorrectly positioned following an impact.

A badly damaged insert should be replaced with a component designed for the machine.

Before ordering, always check the exact table saw model together with the dimensions and shape of the original insert.

Rip fences and guide systems

The rip fence is an essential component of a table saw.

It guides the timber parallel to the saw blade and allows accurate longitudinal or ripping cuts to be made.

The complete assembly may include several components such as the fence extrusion, mounting bracket, locking mechanism, handle, clamping parts and adjustment components.

A fence with excessive play or a damaged locking system can affect cutting accuracy.

When carrying out a repair, it is therefore advisable to inspect the complete mechanism rather than replacing only the visibly damaged component.

Riving knives for table saws

The riving knife is positioned behind the saw blade and is an important part of the table saw configuration.

It must be suitable for the blade diameter and thickness as well as for the design of the machine.

A bent, incorrectly positioned or unsuitable riving knife can interfere with the passage of the workpiece.

Its condition and alignment with the saw blade should therefore be checked regularly.

When replacing a riving knife, always check the exact Leman table saw model and machine version.

Blade guards and safety components

The blade guard is an essential safety component on a table saw.

Depending on the machine design, it may be mounted on the riving knife or attached to a dedicated support system.

A broken, cracked or incomplete blade guard should be replaced with a suitable component.

Associated mounting systems, pivots, screws and brackets should also be checked to ensure correct installation.

Safety devices should never be removed or disabled to compensate for a damaged component.

Drive belts and transmission parts for Leman table saws

Depending on the model, power from the motor may be transferred to the saw arbor through a drive belt and pulley system.

These components are subjected to significant loads during operation.

A worn drive belt may show:

  • cracks;

  • fraying;

  • loss of tension;

  • worn ribs;

  • slipping;

  • general deterioration of the material.

A faulty belt can cause poor power transmission, vibration or irregular operation.

When replacing a drive belt, always use the correct profile, length and dimensions specified for the original component.

Pulleys, saw arbor and bearings

The drive system of a table saw can include mechanical components such as pulleys, the saw arbor and bearings.

Worn bearings may cause noise, vibration or excessive play in the saw arbor.

A damaged or misaligned pulley can also cause premature belt wear.

If unusual vibration occurs, it is advisable to inspect the complete drive system, including:

  • saw arbor;

  • bearings;

  • pulleys;

  • drive belt;

  • motor mountings;

  • saw blade mounting.

Checking the complete assembly can help identify the actual cause of the problem before replacement parts are ordered.

Handwheels and blade adjustment mechanisms

A table saw generally includes mechanisms for adjusting the cutting height and, depending on the model, the angle or tilt of the saw blade.

These mechanisms may include handwheels, threaded rods, shafts, gears, handles and various connecting components.

With regular use, these parts can develop excessive play, become difficult to operate or suffer mechanical damage.

Correct cleaning and lubrication of the mechanisms can help maintain smooth operation.

When a mechanical component is broken or excessively worn, replacing it can restore accurate blade adjustment.

Motors for Leman table saws

The motor is one of the main components of a table saw.

However, a loss of cutting power does not necessarily mean that the motor needs to be replaced.

Before replacing the motor, it is advisable to check:

  • the electrical power supply;

  • the condition of the saw blade;

  • possible mechanical resistance or blockage;

  • the drive system;

  • bearings;

  • electrical connections;

  • the switch;

  • associated electrical components.

A replacement motor must have electrical and mechanical specifications suitable for the machine.

Switches and electrical components

A faulty switch may prevent the table saw from starting or cause unexpected shutdowns.

Some table saws use switches incorporating additional safety functions.

Before ordering a replacement switch, always check:

  • voltage;

  • current rating;

  • number of connections;

  • wiring configuration;

  • dimensions;

  • mounting system;

  • original part number.

Two switches that look similar externally are not necessarily interchangeable.

Any electrical work must be carried out with the machine disconnected from the power supply and, where necessary, by a suitably qualified person.

Maintaining your Leman table saw

Regular maintenance helps preserve the accuracy and working life of your Leman table saw.

It is advisable to:

  • regularly remove sawdust and wood chips;

  • check the condition of the saw blade;

  • check the alignment of the riving knife;

  • inspect the blade guard;

  • clean and inspect the rip fence;

  • check the blade height and tilt mechanisms;

  • inspect the drive belt where fitted;

  • check the bearings and saw arbor;

  • inspect machine fixings;

  • use suitable dust extraction.

Heavy sawdust accumulation inside the machine can interfere with adjustment mechanisms and chip evacuation.

Regular cleaning therefore also helps reduce premature wear on certain mechanical components.

Identifying the correct spare part for your Leman table saw

Before ordering a spare part for a Leman table saw, identify the exact model and version of your machine.

For a Leman LOSST315, locate the part number or position number on the exploded parts diagram whenever possible.

Also compare:

  • the shape of the component;

  • its dimensions;

  • mounting arrangement;

  • mounting holes;

  • any reference marked on the original component;

  • its position on the machine.

These checks are particularly important for electrical components, drive parts and safety equipment.

IMPORTANT: check compatibility before purchasing

IMPORTANT: BEFORE PURCHASING, ALWAYS CHECK THE LIST OF COMPATIBLE MACHINES.

A replacement part that looks similar to the component fitted to your table saw is not necessarily compatible.

Changes may also have been made to a machine during its production period.

If there is any doubt, provide the exact model, month and year of manufacture and serial number of your machine.

If you have an exploded parts diagram, also provide the position number of the required component.

This information helps reduce identification errors and ensures that the replacement part corresponds to your particular machine.

Repair your Leman table saw

Table inserts, rip fences, riving knives, blade guards, drive belts, pulleys, saw arbors, bearings, handwheels, motors, switches and other components: our range of spare parts for Leman table saws is designed to help you maintain and repair your woodworking machine.

The range may be expanded as additional Leman replacement parts become available.

For the Leman LOSST315, as with other Leman table saws, accurate identification of the machine and original component is essential before ordering.

Replacing a worn or damaged component can significantly extend the working life of a table saw and help keep your machine reliable and accurate for woodworking applications.