Blade protector for circular saw Jet JTS-315SP
External flange for circular saw Jet JTS-315SP
Internal flange for circular saw Jet JTS-315SP
Divider knife for circular saw Jet JTS-315SP
Piece n° 81 for Divider knife for circular saw Jet JTS-315SP
Piece n° 78 for Divider knife for circular saw Jet JTS-315SP
The JET JTS-315SP jobsite table saw is designed for cutting wood in woodworking, carpentry, construction and various workshop applications. Equipped with a circular saw blade, this machine allows users to cut timber and prepare wooden components for furniture manufacturing, joinery and other woodworking projects.
Like any woodworking machine, a table saw requires regular maintenance and the replacement of certain components when they become worn, damaged or missing. Parts responsible for securing the blade, guiding the cutting process and protecting the operator must remain in good working condition.
At Probois Machinoutils, we offer a selection of JET JTS-315SP table saw spare parts to help you maintain, repair and restore your woodworking equipment.
This category includes essential components such as the saw blade guard, inner and outer blade flanges, M14 blade retaining nut, riving knife and the associated mounting and guiding components.
These replacement parts contribute to the correct operation of the machine and the reliability of its safety devices. Each component must be selected according to the exact model and manufacturer's specifications.
The blade guard for JET JTS-315SP is an essential component of the table saw's safety system. Its main purpose is to reduce the risk of accidental contact with the upper section of the rotating saw blade during cutting operations.
The blade guard also helps limit the direct projection of certain wood chips and debris generated during sawing.
This protective device must be correctly installed and remain functional whenever its use is required by the manufacturer. It should never be removed or disabled simply to make a cutting operation easier.
Over time, a blade guard may become damaged due to accidental impact, improper handling or deterioration of its mounting components.
Cracks, deformation or defective fastening can compromise its protective function and make replacement necessary.
Our catalogue includes a replacement blade guard for the JET JTS-315SP jobsite table saw, allowing you to restore this important safety component.
Before ordering, check the exact model reference and make sure that all components required for installation are present and in good condition.
The inner blade flange for JET JTS-315SP forms part of the system used to secure the circular saw blade to the machine's arbor.
It provides a supporting surface that helps position the blade correctly during installation.
Together with the outer flange and retaining nut, it contributes to keeping the saw blade securely mounted during rotation.
The inner flange must have a clean, even supporting surface without deformation that could affect the blade mounting system.
If the flange is damaged, distorted or shows signs of abnormal wear, its condition must be assessed before the saw is used again.
Incorrect blade support may cause vibrations, irregular rotation or poor cutting quality.
Replacing the JET JTS-315SP inner blade flange requires a component that matches the manufacturer's original specifications.
When installing a new saw blade, always inspect the contact surfaces and remove any sawdust, wood chips or other debris that could interfere with proper mounting.
The outer blade flange for the JET JTS-315SP saw completes the blade clamping system.
It is positioned on the outer side of the circular saw blade and works together with the inner flange and retaining nut to secure the cutting tool to the arbor.
Both flanges must be compatible with the machine and have contact surfaces in good condition.
A damaged or distorted outer flange can compromise blade clamping and cause incorrect blade positioning.
When changing a circular saw blade, it is advisable to check that both flanges are clean and free from chips or residues between their contact surfaces.
If the outer flange shows signs of damage, it must be replaced before the machine is put back into operation.
At Probois Machinoutils, you can find the outer blade flange for JET JTS-315SP among the spare parts available for this jobsite table saw.
The M14 retaining nut for JET JTS-315SP table saw is used to secure the circular saw blade to its arbor.
It works with the blade flanges to hold the blade in place according to the mounting system specified by the manufacturer.
This nut must have an undamaged thread and be fully compatible with the machine's arbor.
A damaged thread, deformed nut or component showing excessive wear may compromise the quality of the blade fastening.
It is essential not to replace this part with a standard nut selected solely according to its nominal thread diameter.
The thread direction, dimensions and other technical characteristics must match the original component.
Our catalogue includes an M14 blade retaining nut for the JET JTS-315SP circular table saw.
When replacing the saw blade, follow the manufacturer's instructions regarding installation and tightening. Never operate the machine if there is any uncertainty about the security of the blade mounting.
The riving knife for JET JTS-315SP is a particularly important safety component on a circular table saw.
Positioned behind the blade, it helps reduce the risk of the wood closing onto and pinching the rotating saw blade during certain cutting operations.
By maintaining separation within the saw kerf, it contributes to reducing the risk of workpiece kickback.
A correctly installed riving knife must be suitable for the blade diameter, blade body thickness and cutting kerf width, in accordance with the manufacturer's instructions.
Its position relative to the blade must also comply with the adjustment specifications provided for the machine.
A bent, damaged or incorrectly secured riving knife may lose its effectiveness and create a safety risk during operation.
If this component is missing or damaged, the safety system must be restored before carrying out operations that require its use.
We offer a replacement riving knife for the JET JTS-315SP table saw to help restore the machine's original protective equipment.
The riving knife holder for JET JTS-315SP is part of the mounting system used to secure this essential safety component.
It helps maintain the riving knife in the position specified by the manufacturer and contributes to its stability during cutting operations.
Correct fastening is essential to maintain proper alignment between the riving knife and the circular saw blade.
If a mounting component becomes bent, worn or damaged, the riving knife may no longer remain correctly positioned.
This can cause friction against the workpiece, interfere with its movement or reduce the effectiveness of the protective system.
Before replacing the holder, inspect the associated components and check the assembly using the machine's technical documentation.
Our catalogue includes a riving knife mounting component for the JET JTS-315SP table saw.
After installation, always verify that the riving knife is correctly aligned and securely fastened before operating the machine.
The JET JTS-315SP riving knife guide plate is one of the components involved in positioning and guiding the machine's riving knife.
It contributes to the proper operation of the mounting assembly by helping keep the components in the configuration specified by the manufacturer.
A damaged guide plate may cause adjustment difficulties or incorrect riving knife positioning.
It is therefore important to inspect this component whenever alignment problems occur.
Replacement must be carried out using a part suitable for the machine and installed according to the corresponding exploded parts diagram.
At Probois Machinoutils, we offer a riving knife guide plate for the JET JTS-315SP circular table saw.
After any intervention on this system, the position of the riving knife relative to the saw blade must be checked before the machine is returned to service.
To order the correct JET JTS-315SP table saw replacement part, it is important to check the exact references of both the machine and the component required.
Some parts may look similar while having different dimensions or technical specifications.
We recommend following these steps:
This procedure is particularly important for components associated with blade fastening and machine safety systems.
Never modify or adapt an incompatible component simply to make it fit the machine.
A vibrating circular saw blade can cause uneven cuts, unusual noises and premature wear of certain machine components.
Several factors may explain this problem:
Before carrying out any inspection or repair, switch off and disconnect the machine from the electrical supply. It is important to identify the actual cause rather than replacing several components without a proper diagnosis.
If significant vibrations occur during cutting, stop using the saw immediately until the problem has been resolved.
The riving knife and blade guard are two essential safety components of a jobsite table saw.
The riving knife helps reduce the risk of wood pinching the blade and causing kickback, while the blade guard helps protect the operator against accidental contact with the rotating cutting tool.
These devices must be correctly installed, adjusted and maintained in good condition.
Before each use, check that the blade guard is securely mounted and that the riving knife is free from deformation or alignment defects.
A missing or damaged safety device must never be considered a purely cosmetic problem.
Restoring these components helps maintain the operating conditions intended by the manufacturer.
Regular maintenance of your JET JTS-315SP table saw helps preserve cutting accuracy and reduce premature wear of its components.
After each use, remove accumulated sawdust and wood chips from the table and accessible areas of the machine.
It is also advisable to periodically inspect the protective devices, blade clamping components and adjustment mechanisms.
A clean and properly sharpened saw blade helps reduce cutting effort. Conversely, a dull blade may require excessive feeding pressure and increase the risk of overheating or burn marks on the wood.
Using a suitable dust extraction system is recommended to limit the accumulation of sawdust and wood chips in the working environment.
All maintenance operations must be carried out with the machine disconnected from the electrical supply and in accordance with the manufacturer's instructions.
Replacing a JET JTS-315SP table saw spare part becomes necessary when a component develops a defect that could affect machine operation or operator safety.
A distorted blade flange, damaged retaining nut, bent riving knife or broken blade guard are examples of situations requiring inspection and, where appropriate, replacement.
It is important not to continue operating a machine with defective blade fastening or damaged protective equipment.
Replacement parts must be installed according to the manufacturer's instructions and checked before the machine is returned to service.
At Probois Machinoutils, we support professional woodworkers, craftsmen and woodworking enthusiasts in maintaining and repairing their machines.
Our category dedicated to JET JTS-315SP jobsite table saw spare parts includes several essential components for blade mounting and the operation of the machine's safety devices.
You can find replacement blade guards, inner and outer blade flanges, M14 retaining nuts, riving knives, mounting components and guide plates.
We place particular importance on identifying the correct references to make it easier to find components suitable for each machine.
If you are looking for a part that is not currently listed in our catalogue, you can send us the complete reference of your saw together with the position number shown on the exploded parts diagram.
This information will allow us to review your request and check whether the required component can be supplied.
Discover JET JTS-315SP table saw spare parts at Probois Machinoutils and maintain your machine to preserve its cutting accuracy, reliability and essential safety features.
