Rod operating the flywheel of the circular saw Holzmann K5-260, Bernardo CWM250 and Bernardo FK200R
Turning pole for the circular saw on Holzmann K5-260, Bernardo CWM250 or FK200R
Discover our selection of spare parts for Bernardo FK200R saw and spindle moulder combination machines, designed for maintenance, repairs and replacement of worn mechanical components.
The Bernardo FK200R is a combination woodworking machine that brings together circular sawing and spindle moulding functions. This configuration allows users to carry out different cutting, profiling and milling operations in a woodworking workshop.
Like any woodworking machine, this combination model incorporates several transmission, adjustment and positioning mechanisms that must remain in good condition to ensure accurate machining.
Over time and with repeated use, certain components may become worn, deformed or develop excessive play.
At Probois Machinoutils, we offer spare parts for the Bernardo FK200R circular saw adjustment mechanism, including an adjustment rod and its corresponding nut.
These components allow the relevant adjustment system to be repaired without necessarily replacing the entire mechanism.
The circular saw handwheel adjustment rod for Bernardo FK200R is part of the machine's mechanical adjustment system.
It transfers the movement of the handwheel to the associated saw adjustment mechanism.
This component must remain in good condition to ensure smooth movement and accurate positioning.
Our catalogue includes a replacement rod for the circular saw adjustment handwheel, also listed for certain other combination woodworking machines.
According to the compatibility information provided on the product page, this part is suitable for:
Bernardo FK200R.
Bernardo CWM250.
Holzmann K5-260.
A damaged adjustment rod may make the handwheel difficult to operate or prevent the mechanism from working correctly.
Several symptoms may indicate a problem:
The handwheel becomes difficult to turn.
The saw adjustment becomes irregular.
The mechanism develops excessive play.
The adjustment rod is bent or damaged.
The thread shows significant wear.
The mechanism jams at certain positions.
However, these symptoms may also be caused by other components within the adjustment system.
Before replacing the rod, it is advisable to inspect the nut, supports and other associated mechanical parts.
The circular saw adjustment rod nut for Bernardo FK200R is a mechanical component designed to work with the corresponding adjustment rod.
It contributes to the operation of the adjustment mechanism and allows movement to be transferred between the relevant components.
A nut in good condition helps maintain smooth adjustment and limits excessive mechanical play.
Our selection includes a replacement nut for the circular saw adjustment rod, listed for several woodworking machines:
Bernardo FK200R.
Bernardo CWM250.
Bernardo TK200R.
Holzmann K5-260.
Over time, the nut's internal thread may become worn or damaged.
This wear may cause excessive play, adjustment difficulties or poor transmission of handwheel movement.
In some cases, the nut may also become stuck on the rod if the thread is damaged or the mechanism is contaminated with sawdust and debris.
Before replacing the component, it is recommended to inspect both the rod and the nut.
Fitting a new adjustment rod with a heavily worn nut, or a new nut with a damaged rod, may not restore the mechanism to proper working condition.
Replacement parts must match the dimensions and technical characteristics required by the original assembly.
The Bernardo FK200R circular saw adjustment system plays an essential role in positioning the machine's cutting components.
It allows the adjustments provided by the machine's design to be carried out.
For consistent results, the different mechanical components must operate without jamming or excessive play.
A worn mechanism may make adjustments more difficult and affect positioning accuracy.
Threaded rods, nuts and handwheel components are particularly exposed to wear through repeated adjustments.
It is therefore important to inspect them whenever unusual resistance is felt when operating the handwheel.
Never force a handwheel that has become difficult to turn, as this could further damage the threads or associated components.
The cause of the blockage should be identified before the machine is used again.
Certain Bernardo FK200R spare parts may also be suitable for other woodworking machines that use similar adjustment mechanisms.
Depending on the specific reference, the compatibility information in our catalogue includes:
Bernardo FK200R.
Bernardo CWM250.
Bernardo TK200R.
Holzmann K5-260.
These machines may share certain mechanical components, particularly within their circular saw adjustment systems.
However, compatibility must always be checked for each individual part.
The adjustment rod and its nut do not necessarily have the same compatibility with every machine listed above.
Always consult the compatibility information provided on the corresponding product page before ordering.
Before ordering a spare part for your Bernardo FK200R saw and spindle moulder, it is important to check the characteristics of the component that needs replacing.
We recommend checking:
The exact model of your machine.
The information on its identification plate.
The part number shown in the exploded parts diagram.
The shape and dimensions of the original component.
The thread diameter and specifications.
The length of the adjustment rod.
The condition of other components within the mechanism.
For an adjustment rod or nut, differences in diameter, thread pitch or dimensions may make a replacement part incompatible.
It is therefore advisable to compare the original component with the specifications of the proposed replacement.
If you are unsure, the machine's exploded parts diagram can help identify the correct reference.
Several symptoms may indicate that a Bernardo FK200R adjustment rod or nut requires inspection or replacement.
A worn thread may cause significant mechanical play.
A bent rod may make handwheel movement irregular or difficult.
A damaged nut may prevent movement from being transmitted correctly.
A jammed mechanism may also indicate misalignment, contamination or damage to other components.
Inspection is recommended when:
The handwheel becomes difficult to turn.
The adjustment mechanism develops tight spots.
Unusual play appears.
Adjustment movement becomes irregular.
The mechanism no longer operates correctly.
Before replacing a component, it is essential to identify the actual cause of the malfunction.
Cleaning, checking the alignment or repairing another component may sometimes be necessary.
Regular maintenance helps preserve the performance and service life of your Bernardo FK200R saw and spindle moulder combination machine.
Adjustment mechanisms should be kept clean and free from excessive sawdust and wood shavings.
It is advisable to check the operation of the handwheels and mechanical controls periodically.
Threads and moving components should be maintained according to the manufacturer's recommendations.
Also inspect the machine's guards and safety devices.
Any mechanism showing abnormal resistance should be checked before the machine is used again.
Before carrying out maintenance, disconnect the machine completely from the power supply and wait until all rotating components have stopped.
Never restart the machine if an essential adjustment mechanism or safety device is not functioning correctly.
At Probois Machinoutils, we offer a selection of spare parts for Bernardo FK200R saw and spindle moulder combination machines.
Are you looking for a circular saw handwheel adjustment rod or an adjustment rod nut?
Browse the available references in this category to repair the relevant mechanism.
Certain components may also be suitable for Bernardo CWM250, Bernardo TK200R or Holzmann K5-260 machines, according to the compatibility information provided on each product page.
Our spare parts catalogue may evolve depending on availability and customer requirements.
Are you looking for another part for your Bernardo FK200R, such as a drive belt, bearing or mechanical component?
Provide us with the exact model of your machine and, whenever possible, the part number shown in its exploded parts diagram.
This information will help us identify the required reference and check whether it can be supplied.
Repairing your Bernardo FK200R saw and spindle moulder with suitable spare parts helps extend its service life and maintain its performance for woodworking applications.
