Spare Parts for Holzmann HOB260ABS: Maintain and Repair Your Planer Thicknesser

Discover our selection of spare parts for the Holzmann HOB260ABS planer thicknesser, designed for maintenance, troubleshooting and the replacement of worn or damaged components on your woodworking machine.

The Holzmann HOB260ABS performs two essential woodworking operations: surface planing, which produces a flat surface and a reference edge, and thicknessing, which brings wooden workpieces to the required thickness.

Over time, certain components may wear out or need replacing, including drive belts, feed rollers, pulleys, chains, adjustment mechanisms and electrical parts.

At Probois Machinoutils, we offer a selection of replacement parts to help you identify faulty components and restore your planer thicknesser to working order.

Whether your machine has difficulty feeding wood, a transmission problem or a starting fault, it is important to carry out an accurate diagnosis before ordering a replacement part.

Drive Belts for Holzmann HOB260ABS

Drive belts transmit movement between the motor and the various mechanisms of the planer thicknesser.

Our selection includes a 940J5 (370J) Poly-V motor belt, position 116, offered for several planer thicknesser models.

We also offer a 695 × 10 mm flat belt, position 151, and a 205J fan belt.

These belts perform different functions and are not interchangeable.

A belt must match the profile, length and dimensions specified for its particular location.

Before ordering, identify the relevant belt on the exploded parts diagram and check its compatibility on the product page.

When Should You Replace a Planer Thicknesser Belt?

A belt may need replacing when it shows signs of wear or deterioration.

The most common symptoms include:

• A cracked, split or frayed belt.

• A broken belt or one that has come off its pulleys.

• Slipping during operation.

• Irregular transmission of movement.

• Unusual noise from the transmission system.

• Damaged ribs on a Poly-V belt.

If a belt slips or breaks prematurely, also check the condition and alignment of the pulleys.

A damaged pulley or a jammed mechanism may cause the new belt to wear rapidly.

Replacement must be carried out with the machine unplugged and in accordance with the manufacturer's instructions.

Motor Pulley and Transmission Components for Holzmann HOB260ABS

Pulleys transmit movement from the motor to the machine's mechanisms.

Our selection includes a motor pulley, position 113, reference 10002928, also identified under reference 10017609 according to the product information.

A damaged pulley may cause abnormal belt wear, vibrations or irregular power transmission.

Before replacing a pulley, inspect its overall condition and that of the associated belt.

Also check the specifications of the original part, including its diameter, bore, profile and attachment system.

Two pulleys that look similar are not necessarily interchangeable.

To avoid ordering mistakes, use the position number on the exploded parts diagram and the compatibility information provided on the product page.

Infeed Roller, Position 52, for Holzmann HOB260ABS

The infeed roller helps move the wood through the machine during thicknessing operations.

It feeds the workpiece towards the cutterblock under the operating conditions specified by the manufacturer.

Our selection includes an infeed roller, position 52, for the models indicated on its product page.

A roller may need replacing when its surface is severely worn, damaged or deformed.

However, feeding difficulties do not always originate from the roller itself.

The transmission components, machine settings and operating conditions should also be checked.

Before ordering, make sure that position 52 corresponds to the roller fitted to your particular version of the Holzmann HOB260ABS.

Outfeed Roller, Position 70, for Holzmann HOB260ABS

The outfeed roller helps move the wood after it has passed the cutterblock.

Our selection also includes an outfeed roller, position 70, offered for the machines listed in its compatibility information.

This component must retain a surface suitable for its function.

A worn or damaged roller may contribute to irregular wood feeding.

It is important to distinguish the infeed roller at position 52 from the outfeed roller at position 70.

These two components occupy different positions within the machine and must not be confused.

Before replacing either roller, check its position number, specifications and exact compatibility.

Wood No Longer Feeds Correctly Through the Thicknesser: What Are the Possible Causes?

Difficulty feeding wood may have several causes.

It is therefore preferable to carry out a systematic inspection rather than immediately replacing the first component suspected of being faulty.

Check the following:

• The condition of the infeed roller.

• The condition of the outfeed roller.

• The drive belts.

• The chains and other feed transmission components.

• Any possible mechanical obstruction.

• The settings specified by the manufacturer.

• The cleanliness of the surfaces over which the wood travels.

A roller that no longer rotates is not necessarily defective: the problem may originate from a belt, chain or another transmission component.

Conversely, a functioning transmission does not guarantee correct feeding if a roller's surface is severely damaged.

An accurate diagnosis helps ensure that only the components actually responsible for the problem are replaced.

Drive Chains for Holzmann HOB260ABS

Drive chains transmit movement between mechanical components equipped with suitable sprockets.

Our selection includes a 53-link chain, position 82, offered for the models explicitly listed on its product page.

Another chain, position 158 with 22 links, is also offered for certain planer thicknesser models.

Important: These two chains are different and must not be considered interchangeable.

Their number of links, installation position and compatibility must be checked before ordering.

A chain may need replacing if it has damaged links, excessive elongation, stiff links or a breakage.

During replacement, also inspect the condition of the associated sprockets.

A new chain fitted to heavily worn sprockets may not operate satisfactorily.

Thicknesser Adjustment Handwheel, Position 96, for Holzmann HOB260ABS

The adjustment handwheel operates the thicknessing table positioning mechanism according to the machine's design.

Our selection includes a thicknesser handwheel, position 96, intended for the models listed in its compatibility information.

A broken or cracked handwheel, or one with a damaged attachment, may make adjustment operations difficult.

However, if the table raising or lowering mechanism is jammed, replacing the handwheel alone may not solve the problem.

The cause of the obstruction should first be identified, and the associated mechanical components inspected.

Do not force a handwheel that offers abnormal resistance.

Before ordering, check that position 96 corresponds to your machine.

Deflector, Position 45, for Holzmann HOB260ABS

The deflector helps direct wood chips or contributes to the operation of the system in which it is installed, depending on the machine's configuration.

Our category includes a deflector, position 45, for the models indicated on its product page.

A damaged, cracked or deformed deflector may need replacing.

It is important to match the shape and dimensions of the original component.

A deflector that looks similar to one fitted to another planer thicknesser is not necessarily compatible.

Always check its position number on the exploded parts diagram and the information provided in the list of compatible machines.

Overload Protector, Position 194, for Holzmann HOB260ABS

The overload protector is an electrical protection component integrated into the machine's circuit according to its configuration.

Our selection includes an overload protector, position 194, offered for several 230 V models explicitly listed on its product page.

Its purpose is to help protect the electrical system against certain overload conditions, in accordance with the specifications established by the manufacturer.

Repeated tripping does not necessarily mean that the protector itself is defective.

It may indicate a mechanical problem, excessive load, a power supply fault or another electrical issue.

Before replacing this component, it is essential to identify the cause of the tripping.

Never install an overload protector with electrical specifications that differ from those required for your machine, and never bypass this protective device.

Work on the electrical circuit must be entrusted to a qualified person.

Emergency Stop for Holzmann HOB260ABS Planer Thicknesser

The emergency stop is one of the machine's safety devices.

Our selection includes emergency stop components intended for the models indicated on their respective product pages.

A broken button, jammed mechanism or device that no longer operates correctly must be inspected before the machine is used again.

It is essential to match the contact type, attachment system and specifications of the original component.

An emergency stop must never be replaced with an ordinary switch unless its suitability for the configuration specified by the manufacturer has been confirmed.

Do not use the machine if its emergency stop device is defective.

Capacitor and Starting Difficulties on the Holzmann HOB260ABS

When the motor of your planer thicknesser has difficulty starting, several possible causes should be considered.

A faulty capacitor is one possibility, but this diagnosis must not be based solely on a humming noise or a motor that struggles to start.

A mechanical obstruction, damaged belt, power supply problem or another electrical fault may produce similar symptoms.

Before ordering a capacitor, it is essential to check the specifications of the component installed on your machine, including its capacitance, rated voltage, type and connections.

The configuration may vary depending on the machine version and manufacturing period.

Warning: A capacitor may retain an electrical charge after the power has been switched off. Inspection and replacement must be carried out by a qualified person.

Do not attempt to force a motor to start if it is behaving abnormally.

Are Parts for the Holzmann HOB260ABS, Bernardo PT260 and Other Models Identical?

Some spare parts are offered for several planer thicknesser models, particularly within the Holzmann and Bernardo ranges.

However, visual similarity or a similar product description does not guarantee compatibility.

Components may differ depending on the supply voltage, manufacturing period or design changes introduced by the manufacturer.

The Holzmann HOB260ABS, Bernardo PT260 and PT260S must therefore not be considered completely identical machines.

A part compatible with one version may not fit another.

It is essential to check the list of compatible machines for each product and, where required, the month and year of manufacture and the serial number.

This precaution is particularly important for electrical components, belts, pulleys and transmission parts.

How to Identify the Correct Spare Part for Holzmann HOB260ABS

To avoid ordering mistakes, start by recording the information on your machine's identification plate.

You should also obtain the exploded parts diagram corresponding to your model.

Useful information includes:

• The exact brand and model: Holzmann HOB260ABS.

• The supply voltage: 230 V or another version, depending on your machine.

• The serial number.

• The month and year of manufacture.

• The part's position number on the exploded diagram.

• The manufacturer's part reference, where available.

• The dimensions and specifications of the original component.

For a belt, check its length and profile.

For a pulley, check its diameter, bore and attachment system.

For a chain, identify the number of links and its installation position.

For an electrical component, always check its rated specifications and connections.

IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.

Maintain Your Holzmann HOB260ABS Planer Thicknesser to Help Prevent Breakdowns

Regular maintenance helps identify certain signs of wear before they lead to a more serious breakdown.

With the machine unplugged and in accordance with the manufacturer's manual, periodically inspect the condition of accessible belts, transmission components and adjustment devices.

Remove wood chips and accumulated dust using the maintenance methods recommended by the manufacturer.

Also pay attention to unusual noises, vibrations and difficulties feeding wood.

A change in the machine's behaviour may indicate that a component needs inspecting.

Do not continue operating the machine if a mechanical or electrical fault is suspected.

Early intervention may prevent a damaged part from causing further damage to other components.

Repair Your Holzmann HOB260ABS Instead of Replacing the Entire Machine

A localised fault does not always require replacing the entire planer thicknesser.

A broken belt, worn roller, damaged pulley or deteriorated handwheel can be replaced individually when a compatible spare part is available.

However, identifying the underlying cause is essential.

A belt that repeatedly breaks may indicate an alignment problem or a mechanical obstruction.

Difficulty feeding wood may originate from several different components.

An electrical protection device that trips may indicate a fault requiring further diagnosis.

Replacing the visibly damaged part must therefore not conceal a more serious problem.

An appropriate repair allows you to retain components that are still functional and extend the service life of your woodworking machine.

Find Holzmann HOB260ABS Spare Parts at Probois Machinoutils

At Probois Machinoutils, discover our selection of spare parts for the Holzmann HOB260ABS planer thicknesser to maintain your equipment and replace worn or damaged components.

Explore our belts, pulleys, feed rollers, transmission components, adjustment handwheels, deflectors and electrical parts, making sure to check the compatibility information provided on each product page.

Looking for a part that is not included in our selection?

Send us your machine's exact model, serial number, manufacturing date and, if possible, the component's position number on the exploded parts diagram.

A photograph of the original part and the machine's identification plate may also help us identify it.

Order your Holzmann HOB260ABS spare parts from Probois Machinoutils to maintain your planer thicknesser, carry out an appropriate repair and extend the service life of your machine.