Laser holder for radial miter saw Kity, Scheppach and Dexter
Laser holder for radial miter saw Kity, Scheppach and Dexter
Laser holder for radial miter saw Kity, Scheppach and Dexter
Bottom handle mark 55 is dedicated to radial miter saws Kity MS255A and Scheppach HM100MP
Top handle mark 65 is dedicated to radial miter saws Kity MS255A and Scheppach HM100MP
Carbon brushes for radial miter saw Kity MS255A and Scheppach HM100MP
Are you looking for spare parts for your Dexter MS SL 10S sliding mitre saw? At Probois Machinoutils, we offer a selection of replacement components designed for the maintenance and repair of this woodworking and DIY machine, sold under the Dexter brand, particularly through Leroy Merlin stores.
The Dexter MS SL 10S sliding mitre saw, also searched for under the reference Dexter MSSL10S, is designed to perform various woodcutting operations. Thanks to its sliding mechanism, the cutting head can move along a guided path, allowing the machine to cut relatively wide workpieces according to its cutting capacities.
This saw can be used for cutting skirting boards, wooden battens, mouldings, trim and other woodworking components. It allows straight cuts, mitre cuts and bevel cuts, depending on the available settings.
Like other portable electric woodworking machines, it contains mechanical and electrical components that may wear out or become damaged over time. Instead of replacing the entire machine, it may be possible to carry out a targeted repair using a suitable replacement part.
This category includes carbon brushes for the Dexter MS SL 10S, replacement handles and a laser holder designed for the saw's cutting guidance system.
A sliding mitre saw consists of various components that contribute to its operation. The motor drives the saw blade, the handles allow the cutting head to be operated and controlled, while the adjustment and guiding mechanisms help position the workpiece.
Regular maintenance makes it possible to monitor the condition of these components and detect potential problems before they cause more serious failures.
Signs that may require inspection include difficulty starting the machine, irregular motor operation, a damaged handle or a problem with the laser holder.
It is important to distinguish normal component wear from a fault originating elsewhere in the machine. For example, a motor that no longer starts may have worn carbon brushes, but the problem could also be caused by the electrical supply or another electrical component.
Before carrying out any work, it is essential to disconnect the mitre saw from the mains supply and ensure that the blade has come to a complete stop. Electrical repairs should be entrusted to a suitably qualified person.
The carbon brushes for the Dexter MS SL 10S mitre saw are wear components that may require replacement after prolonged machine use.
In a brushed electric motor, carbon brushes maintain electrical contact with the armature commutator. This contact allows the electrical current required for motor operation to be transmitted.
Because of the friction generated during rotation, the brushes gradually wear down. Their length decreases and their ability to maintain consistent contact may eventually be affected.
When the carbon brushes become severely worn, several symptoms may appear:
However, these symptoms do not necessarily indicate worn carbon brushes. The motor and its components must be inspected to identify the exact cause of the problem.
Our catalogue includes a pair of carbon brushes for the Dexter MS SL 10S sliding mitre saw, also offered for certain Kity MS255A and Scheppach HM100MP models.
When replacing carbon brushes, it is generally recommended to replace both at the same time to maintain even wear. The condition of the commutator and brush holders should also be checked.
Before ordering, check the dimensions, shape and compatibility of the brushes with the exact version of your machine.
The upper handle of a sliding mitre saw is an important component for operating and controlling the cutting head.
It allows the user to grip the machine and guide the downward movement during cutting operations. Depending on the saw's design, it may also accommodate or surround certain control components.
A handle may become damaged following an impact, accidental drop, incorrect handling or prolonged use.
Cracks in the plastic, broken mounting points or deformation may compromise the quality of the grip and make replacement necessary.
This category includes a replacement upper handle, identified in particular as part number 65 for Kity MS255A and Scheppach HM100MP sliding mitre saws.
For use on a Dexter MS SL 10S, it is essential to check that the replacement handle matches the one originally fitted to your machine.
The overall shape, mounting points, cable passages and any housings for control components must be identical or expressly compatible.
After installation, the handle must be securely attached and allow normal operation of the cutting head without interfering with the safety devices.
The lower handle for a sliding mitre saw completes the gripping assembly and helps support the machine's control and operating components.
On certain saws, the upper and lower handles consist of two separate sections assembled around a mechanism or gripping area.
When one section is cracked or broken, it may be possible to replace only the affected component, provided that the remaining parts are still in good condition.
Probois Machinoutils offers a replacement lower handle identified as part number 55, designed for Scheppach HM100MP and Kity MS255A sliding mitre saws.
This component is also included in our selection of replacement parts for the Dexter MS SL 10S. However, it remains essential to check the dimensions, shape and mounting points before ordering.
A damaged handle should not be repaired using improvised methods such as glue or unsuitable fasteners when its mechanical strength or the machine's safety could be compromised.
Replacing it with a suitable component helps restore a proper assembly, provided that installation is carried out correctly.
The laser holder of a sliding mitre saw is a component used to position or secure the laser guidance device, depending on the machine's design.
The cutting laser provides a useful visual reference on the material before sawing begins.
It can be particularly helpful during repetitive cutting operations involving skirting boards, wooden battens, mouldings and trim, where consistent material positioning is important.
The laser holder may become damaged following an impact or an intervention on the machine. A broken or deformed mounting point may cause incorrect positioning of the module and make the projected reference less reliable.
In this category, you will find a laser holder for Kity, Scheppach and Dexter sliding mitre saws, designed for certain compatible machines.
It is important to distinguish the laser holder from the laser module itself. The holder is a mounting component and does not necessarily replace a defective laser device.
If the laser beam no longer lights up, the cause of the malfunction should therefore be investigated before replacing the holder.
After any work on the guidance system, the laser position must be checked and adjusted in accordance with the manufacturer's instructions.
There are similarities between certain sliding mitre saws sold under the Dexter, Kity and Scheppach brands.
Some components may therefore be offered for several machine models, particularly carbon brushes, handles and laser mounting brackets.
Models mentioned in our catalogue include the Dexter MS SL 10S, Kity MS255A and Scheppach HM100MP.
This potential compatibility between different machines can make it easier to find spare parts for older equipment or models that are no longer commercially available.
However, not all components from these saws should be considered automatically interchangeable.
Two machines with a similar appearance may have differences in manufacturing, mounting points or dimensions. Certain parts may also vary depending on the year or production version.
It is therefore essential to consult the compatibility information provided on each product page and compare the components with the original parts.
Before ordering a spare part for the Dexter MS SL 10S sliding mitre saw, we recommend checking the information displayed on your machine's identification plate.
The commercial reference may appear in different forms, including Dexter MS SL 10S or Dexter MSSL10S. It is important to verify the exact designation to avoid confusing it with the Dexter MS SL 10 or other models in the range.
To reduce the risk of ordering an incorrect component, we recommend the following checks:
For motor carbon brushes, dimensions and connection design are particularly important. For handles, special attention should be paid to the mounting points and the matching of the two handle sections.
If you are unsure, a photograph of the original part and the machine's identification plate may help with identification.
Replacing a spare part should be considered when its condition or operation no longer allows normal and safe use of the machine.
Motor carbon brushes should be inspected when they show significant wear or when electrical symptoms suggest a possible contact problem with the commutator.
Mitre saw handles should be inspected if they are cracked, broken or show excessive movement. A handle that no longer provides a secure grip must be replaced before the machine is used again.
The laser holder may require replacement when it is broken, deformed or no longer capable of securely supporting the guidance module.
It is also advisable to use maintenance operations as an opportunity to check the overall condition of the machine, particularly the power cable, fasteners, protective devices and cutting head movement mechanism.
A machine with a safety-related defect must not be used until the problem has been corrected.
Replacing a spare part can be an economical and practical solution when a fault affects a clearly identified component.
Changing a pair of worn carbon brushes, a broken handle or a damaged laser mounting bracket can help extend the service life of a machine that is otherwise in good working condition.
Repairing equipment can also help prevent premature replacement and reduce waste associated with electrical machinery.
This approach is particularly worthwhile when the required spare part is available and the repair can be carried out under appropriate conditions.
However, the overall condition of the saw must always be taken into account. A machine with serious structural damage or defective safety devices must undergo appropriate inspection and repair before being returned to service.
As a specialist in woodworking machinery, tools and spare parts, Probois Machinoutils supports both private users and professionals in maintaining and repairing their equipment.
Our category dedicated to the Dexter MS SL 10S sliding mitre saw includes a selection of replacement components, particularly motor carbon brushes, an upper handle, a lower handle and a laser holder.
Each product page provides available information about the component to help you select the correct spare part for your machine.
If you cannot find the component you need, you can contact our customer service team with the exact model of your saw and, if possible, a photograph of the part to be replaced.
Explore our selection of spare parts for Dexter MS SL 10S and MSSL10S sliding mitre saws to carry out necessary maintenance, repair your equipment and continue your woodworking, DIY and interior fitting projects.