Safety valve for Scheppach, Woodster and Parkside compressors
Safety valve 5906101094 or 5906115059 for Scheppach, Woodster and Parkside compressors
Safety valve 5906101094 or 5906115059 for Scheppach, Woodster and Parkside compressors
Valve plate for Scheppach, Woodster and Parkside compressors
Cylinder gasket reference 3906107047 for compressor Scheppach, Woodster and Parkside
Gasket support plate for compressor Scheppach HC50 (Exhibit 48 on the exploded view) and other references and marks such as Woodster and Parkside
Gasket for Scheppach HC50 compressors (part n°42 in exploded view) and other models or brands such as Woodster or Parkside
Quick coupling for Scheppach, Woodster and Parkside compressor corresponding to item 57 or 58 according to the exploded views
Pressure gauge for Scheppach, Woodster and Parkside compressors corresponding to mark 55 on the exploded view
Connector for Scheppach, Woodster and Parkside compressors corresponding to mark 55 on the exploded view
Bleed screw for Scheppach, Parkside and Woodster compressors
Cover for compressor Parkside PKO 270 A1
Handle for various Scheppach, Parkside and Woodster compressors
Protective cover for Parkside PKO 270 A1 compressor
Wheel for various Scheppach, Woodster and Parkside compressors
Bleed screw for different Scheppach, Woodster and Parkside compressors
Pressure regulator for Scheppach, Woodster and Parkside compressors
Air filter for Scheppach HC50S, HC51, HC80V and Parkside PKO 270 A1/A2 compressors
Oil level plug for various Scheppach and Woodster compressors
Safety pin Ø3 x 6 mm, Ref. 5906101007, for Scheppach, Woodster and Parkside air compressors
Are you looking for a spare part for your Parkside PKO 270 A1 air compressor to repair your equipment, replace a faulty component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts designed for the maintenance and repair of your Parkside PKO270A1 compressor.
The Parkside air compressor is a practical piece of equipment for many applications in a garage, workshop or home environment. It can be used for tyre inflation, blowing and operating certain pneumatic tools compatible with its technical specifications.
Like any machine equipped with a motor and compressed air system, an air compressor requires regular maintenance. Vibrations, pressure variations, operating cycles and normal wear can gradually affect certain components.
An air leak, pressure loss, faulty pressure gauge, clogged filter or damaged gasket may reduce performance and interfere with the normal operation of the machine.
This category brings together various replacement parts for the Parkside PKO 270 A1 air compressor, including gaskets, valve plates, safety valves, pneumatic fittings, pressure gauges, pressure regulators, air filters, drain plugs, transport wheels and protective covers.
Our aim is to help you identify suitable components for your equipment, making maintenance easier and avoiding the need to replace the entire compressor whenever a safe and practical repair is possible.
Before ordering a Parkside PKO 270 A1 spare part, it is essential to check the exact reference of your machine.
The Parkside range includes several compressors with similar model names: PKO 270 A1, PKO 270 A2, PKO 270 A3, PKO 270 A4 and PKO 270 A5.
Despite their similarities, these different versions may have variations in mechanical components, pneumatic connections, electrical elements or housing parts.
A component suitable for a PKO 270 A1 is therefore not necessarily compatible with every other version.
To correctly identify your compressor, check its identification plate and record the following information:
Consulting the Parkside compressor exploded parts diagram is particularly useful for identifying the position number of the component that needs replacing.
Some parts may also be used on Scheppach or Woodster compressors. However, the manufacturer's references must always be checked before ordering.
The compressor cylinder gasket helps maintain the airtight seal between mechanical components of the compression system.
It helps prevent air leaks around assembly surfaces and maintain the conditions required for proper machine operation.
Our catalogue includes cylinder gasket reference 3906107047, offered for various Scheppach, Woodster and Parkside compressors.
A damaged gasket may cause several symptoms:
These symptoms may also be caused by other components. It is therefore important to confirm the source of the problem before replacing the gasket.
During disassembly, the contact surfaces should be carefully inspected. The replacement gasket must match the dimensions and configuration of the original part.
Valve plates for Parkside compressors are among the components involved in the operation of the compression system.
Depending on their design, they help control airflow during the intake and compression discharge stages.
A damaged or deformed valve plate can interfere with compressor operation and cause a loss of efficiency.
Our selection includes a compressor valve plate and a gasket support plate offered for various Scheppach, Woodster and Parkside compressor models.
The gasket support plate available in our catalogue corresponds to position 48 on certain Scheppach HC50 compressor exploded diagrams.
Another gasket offered in this category corresponds to position 42 on certain exploded parts diagrams.
These position numbers must always be compared with the documentation for your own machine, as they may vary between models.
If your compressor runs but can no longer reach its normal operating pressure, an inspection of the compression components may be necessary.
The Parkside compressor safety valve is an essential component for protecting the compressed air system.
It operates when pressure conditions require the safety device to activate, in accordance with the specifications established by the manufacturer.
Our catalogue includes safety valve reference 5906101094, which replaces the previous reference 5906115059.
This part is offered for various Scheppach, Woodster and Parkside compressors according to the compatibility information.
A safety valve may require replacement if it shows visible damage, abnormal leakage or a confirmed malfunction.
However, it is important to distinguish a faulty safety valve from a pressure regulation problem. If the valve opens repeatedly, this may also indicate a fault in the compressor control system.
A safety valve must never be blocked, bypassed or modified. Its replacement must comply with the pressure rating and technical specifications required for the machine.
If there is any doubt about the operation of the safety system, the compressor must be inspected before being returned to service.
The compressor pressure gauge allows the user to monitor the air pressure in the part of the system to which it is connected.
Depending on the machine configuration, it may indicate the pressure inside the receiver tank or the regulated outlet pressure used for pneumatic accessories.
Our selection includes a pressure gauge for Scheppach, Woodster and Parkside compressors, corresponding to position 55 on certain exploded parts diagrams.
A pressure gauge may need replacing when:
Before ordering a new pressure gauge, check the dial diameter, connection type, thread and measuring range.
A suitable pressure gauge makes the compressor easier to use and helps the operator monitor pressure more effectively.
The compressor pressure regulator allows the outlet pressure to be adjusted according to the requirements of the pneumatic equipment being used.
It plays an important role in adapting the compressed air supply to the specifications of connected accessories.
Our catalogue includes pressure regulator reference 5906111068, offered for various Scheppach, Woodster and Parkside compressors.
A defective regulator may cause difficulties adjusting the pressure, unstable outlet pressure or abnormal operation of the pneumatic system.
Before replacing it, it is advisable to check whether the problem comes from a fitting, pressure gauge or another component.
The replacement regulator must be selected according to its technical specifications, connection type and compatibility with the machine.
The air filter for Parkside PKO 270 A1 compressor helps prevent dust and particles from entering the compression system.
It therefore contributes to protecting internal components and maintaining the machine's performance.
Our catalogue includes an air filter compatible with Parkside PKO 270 A1 and PKO 270 A2 compressors, also offered for certain Scheppach HC50S, HC51 and HC80V models.
Over time, the filter may become clogged and restrict airflow into the compressor.
Several signs may indicate that an inspection is necessary:
The filter should be maintained or replaced according to the manufacturer's instructions.
Operating the compressor without its air filtration system is not recommended when the manufacturer specifies that a filter must be fitted.
Pneumatic fittings for Parkside compressors allow different components of the compressed air system to be connected.
They must provide a suitable connection and adequate sealing to limit pressure losses.
Our selection includes a quick coupling for Scheppach, Woodster, Zipper and Parkside compressors.
Depending on the exploded parts diagram, this coupling may correspond to positions 57 or 58.
A pneumatic connector is also offered for various Scheppach, Woodster and Parkside compressors.
A fitting may need replacing if it develops a persistent leak, suffers mechanical damage or no longer maintains a secure connection.
Before ordering, it is essential to check the fitting type, dimensions, thread and compatibility with the relevant pneumatic circuit.
The compressor drain plug allows accumulated condensate to be removed from the receiver tank, depending on its position and design.
When a compressor operates, moisture contained in the air can condense and gradually accumulate inside the tank.
Regular draining, carried out according to the manufacturer's instructions, helps limit water accumulation in the receiver.
Our catalogue includes several drain plugs for Parkside, Scheppach and Woodster compressors.
Among the available parts is drain plug reference 5906101066, also associated with reference 10003185, with a stated diameter of 16.6 mm.
It is important to check the exact dimensions and fastening system before ordering.
A drain plug may require replacement if it is damaged, no longer seals properly or develops a leak.
Draining must always be performed in accordance with the manufacturer's safety instructions, particularly regarding the pressure conditions specified in the manual.
Housing and transport parts for Parkside PKO 270 A1 compressor contribute to ease of use and help protect certain components.
Our selection includes:
A broken or severely worn wheel can make the compressor difficult to move. A damaged handle may also make handling the machine less safe.
Protective covers help protect the relevant components and must be correctly installed before operating the machine.
Before replacing a housing component, it is advisable to compare its shape, mounting points and the exact compressor model reference.
Certain compressors require regular lubrication checks according to the instructions in their operating manuals.
Our catalogue includes an oil level plug offered for various Scheppach and Woodster compressors.
The presence of this part in the selection does not remove the need to verify its compatibility with the Parkside PKO 270 A1 before ordering.
We also offer a 3 x 6 mm safety pin, reference 5906101007, intended for various compatible compressors.
These small components may be essential for retaining or operating certain mechanical assemblies.
When a part is missing or damaged, it must be replaced with a component that matches the manufacturer's specified characteristics.
A Parkside PKO 270 A1 compressor that no longer builds pressure may have several different faults.
An air leak around a pneumatic fitting, a damaged cylinder gasket or a valve plate problem may interfere with the operation of the compression system.
A heavily clogged air filter may also restrict air intake and affect performance.
Common symptoms include:
These symptoms may have several causes. It is therefore preferable to carry out a diagnosis before replacing any component.
If a fault affects a safety device or the receiver tank, the compressor must be taken out of service until it has been inspected.
To order a spare part compatible with your Parkside PKO270A1 compressor, several checks are recommended.
A part that looks similar to the original is not necessarily compatible.
Differences in threads, dimensions or operating specifications may prevent installation or compromise the proper functioning of the machine.
It is therefore important to carefully review the information provided in each product description before ordering.
Regular maintenance helps preserve compressor performance and reduce the risk of certain breakdowns.
All maintenance operations must be carried out according to the manufacturer's instructions.
Useful checks include:
Before any maintenance operation, disconnect the compressor from the electrical supply, allow it to cool and ensure that the relevant circuits are completely depressurised.
The compressed air receiver tank must never be drilled, welded or repaired using improvised methods.
Work on safety devices, electrical components or pressure regulation equipment must be carried out by someone with the necessary technical expertise.
When an air compressor develops a fault, replacing the entire machine is not always necessary.
If the problem is caused by an identifiable and replaceable component, an appropriate repair may extend the service life of your equipment.
Replacing a damaged gasket, broken pressure gauge, clogged air filter or worn transport wheel may be a practical solution when the rest of the machine remains in good condition.
Repairing rather than replacing can also help reduce waste and limit the cost of purchasing a new compressor.
However, the overall condition of the machine, repair costs and relevant safety requirements must always be considered.
Probois Machinoutils specialises in the sale of machinery, workshop equipment, accessories and spare parts for numerous brands.
We offer a developing selection of spare parts for Parkside PKO 270 A1 air compressors to help you maintain and repair your equipment.
In this category, you will find various components for the compression system, pneumatic circuit and protective or transport assemblies.
Our selection includes cylinder gaskets, valve plates, safety valves, pressure gauges, pressure regulators, air filters, quick couplings, drain plugs, transport wheels and protective covers.
Our catalogue may change depending on stock availability and the supply of replacement parts from manufacturers.
Before ordering, carefully read the product descriptions and check the references, dimensions and technical specifications.
Whether you are looking for a gasket for Parkside PKO 270 A1 compressor, a replacement air filter, a pressure gauge, a safety valve or a pneumatic fitting, our selection helps you identify the components required to repair your machine.
By choosing a compatible spare part and following the manufacturer's maintenance recommendations, you can help preserve the performance of your Parkside PKO 270 A1 compressor and extend its service life.