Filter By

Price

Price

  • €0.00 - €30.00

Availability

Availability

Spare parts for Parkside PBRM 51 A1 lawnmower

Spare parts for Parkside PBRM 51 A1 lawnmower - Probois Machinoutils

Active filters

Spare Parts for Parkside PBRM 51 A1 Lawn Mower: Repair and Maintain Your Petrol Lawn Mower

Are you looking for a spare part for your Parkside PBRM 51 A1 lawn mower to repair your machine or replace a worn component? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of this petrol lawn mower sold under the Parkside brand.

The Parkside PBRM51A1 lawn mower is designed for lawn maintenance using a petrol engine and a rotating cutting blade. Like any motorised garden machine, it contains mechanical components, transmission parts and engine components that may wear out or become damaged over time.

A damaged blade, clogged carburettor, faulty recoil starter, worn wheel or transmission problem can prevent the lawn mower from operating correctly. In many cases, replacing the affected component can extend the service life of the machine without having to purchase a completely new mower.

Our category dedicated to Parkside PBRM 51 A1 lawn mower spare parts includes a 510 mm cutting blade, carburettor components, transmission parts, rear wheels, a recoil starter, air filtration components, fastening accessories and various engine maintenance parts.

A Parkside PBRM51A1 Lawn Mower That Requires Regular Maintenance

The Parkside PBRM 51 A1 petrol lawn mower is intended for cutting and maintaining grassed areas. Its operation depends on several mechanical assemblies that must remain in good condition to ensure satisfactory performance.

The engine provides the power required to rotate the cutting blade. The wheels, movement system and various operating controls allow the machine to be manoeuvred during mowing.

Depending on the lawn mower configuration, transmission components may also be involved in driving the wheels.

Over time, vibrations, grass clippings, moisture, impacts and normal wear can damage certain components.

Regular maintenance and timely replacement of defective parts help preserve the cutting performance and reliability of your Parkside PBRM51A1 lawn mower.

510 mm Lawn Mower Blade for Parkside PBRM 51 A1

The 510 mm lawn mower blade for Parkside PBRM51A1 is one of the main wear parts on this machine.

It cuts the grass through its rotating movement underneath the mower deck. To achieve an even cutting result, it must be correctly sharpened, balanced and securely attached.

We offer the 510 mm lawn mower blade, part numbers 7911200644 or 7911200628, replacing the earlier part number 7911200621 for the relevant machines.

This blade is intended for various Scheppach, Woodstar and Parkside lawn mowers according to the manufacturer's compatibility information.

Replacement may be necessary when:

  • The cutting edge is severely blunt and no longer cuts the grass correctly.
  • The blade has been bent after striking a stone or root.
  • Cracks or visible mechanical damage are present.
  • The machine produces unusual vibrations caused by an unbalanced blade.
  • Excessive wear prevents satisfactory sharpening.

A cracked or bent blade must not be reused if its mechanical strength has been compromised.

Before ordering, it is essential to check the length, shape, mounting holes and fastening system. A 510 mm blade designed for another lawn mower is not necessarily compatible with your Parkside PBRM 51 A1.

Blade Retaining Bolt and Fastening Components

The blade fastening system plays an essential role in the safety and correct operation of the lawn mower.

Our catalogue includes the blade retaining bolt, part number 5911240001, intended for various Scheppach lawn mowers.

We also offer the washer, part number 5911410040, measuring Ø35 x Ø10.5 x 2.5 mm and used on certain Scheppach, Parkside and Woodstar lawn mowers.

These components must match the specifications required by the manufacturer.

A damaged bolt, deformed washer or unsuitable fastening system may compromise the secure attachment of the blade.

When reassembling, always follow the manufacturer's instructions, particularly regarding the installation direction and specified tightening torque.

Z-750 Drive Belt and Transmission Parts for Parkside Lawn Mower

On lawn mowers equipped with a drive system, the transmission transfers movement from the engine to the relevant mechanical components.

A lawn mower drive belt may gradually wear out, become loose or deteriorate under mechanical stress.

Our catalogue includes the Z-750 drive belt, part number 5911241004, intended for various Scheppach and Woodstar lawn mowers.

Its presence in this category does not mean that it automatically fits every version of the Parkside PBRM51A1. The original belt reference and dimensions must be checked.

A worn drive belt may cause:

  • Reduced transmission efficiency.
  • Problems with the drive mechanism.
  • Unusual noises during operation.
  • Belt slipping or abnormal wear.
  • Complete belt failure, preventing movement from being transmitted.

Before replacing a drive belt, it is also advisable to inspect the condition of the pulleys, their alignment and the absence of mechanical obstructions.

Right-Hand Drive Gear and Woodruff Key for the Transmission System

Gears and keys are mechanical components used in certain transmission systems.

We offer the right-hand drive gear, part number 5911247017, intended for various Scheppach, Parkside and Woodstar lawn mowers according to the relevant compatibility lists.

Depending on the machine design, this type of component may be involved in transmitting movement to the wheels.

A worn or damaged gear can cause drive problems, mechanical noises or irregular operation.

Our catalogue also includes the key, part number 5911249004, measuring 18 x 5.5 x 4 mm and intended for certain compatible lawn mowers.

A key helps provide a mechanical connection between components mounted on a shaft, depending on the design of the assembly.

Before ordering, it is essential to check the dimensions, shape and original part number.

Double Bowden Cable for Throttle and Drive Controls

Bowden cables for petrol lawn mowers transmit movement from the operating controls to the corresponding mechanisms.

Our catalogue includes the double Bowden cable, part number 5911269002, intended for various Scheppach lawn mowers.

This cable features Z-shaped hooks at both ends, with specified lengths of 1400 and 1450 mm for the respective cable sections.

It may be used for throttle and drive functions on compatible machines.

A Bowden cable may require replacement when it becomes frayed, seized, broken or when its outer casing is damaged.

Before ordering, it is important to check the length, end fittings, mounting points and control configuration.

We also offer a set of three hook-and-loop straps, part number 5911244038, designed to secure Bowden cables on various compatible Scheppach, Woodstar and Parkside lawn mowers.

Carburettor and Primer Bulb for Parkside PBRM51A1

The carburettor of a petrol lawn mower prepares the air-fuel mixture required for the engine to operate.

A clogged or faulty carburettor can cause starting difficulties, irregular engine speed or reduced power.

We offer the carburettor, part number 5911238086, replacing the earlier part number 5911247049 for certain Scheppach and Parkside lawn mowers.

Compatibility must be checked according to the engine type and manufacturing version.

Our catalogue also includes the primer bulb, part number 5911247012, intended in particular for the Parkside PBRM51A1 lawn mower.

The primer bulb helps prepare the fuel supply system before starting, depending on the engine configuration.

A cracked, punctured or hardened primer bulb may lose its effectiveness and make starting more difficult.

Before replacing these components, it is advisable to check the condition of the fuel, fuel supply system and other parts that may affect starting performance.

Fuel Tank for Parkside Lawn Mower

The fuel tank stores the petrol required for the engine to operate.

We offer the fuel tank, part number 5911247063, intended for various Scheppach and Parkside lawn mowers according to the compatibility information.

A fuel tank may need replacing if it develops cracks, leaks or damage to its mounting points.

Work on the fuel system must always be carried out with the engine switched off and cooled down, away from flames and ignition sources.

Before ordering a fuel tank, it is important to check its shape, capacity, mounting points and connection to the fuel supply system.

Complete Air Filter Assembly and Air Filter Cover

The air filter of a petrol lawn mower protects the engine against dust and impurities drawn into the intake system during operation.

A clogged filter can restrict airflow and contribute to irregular engine performance.

Our catalogue includes a complete air filter assembly, part numbers 5911247053 or 5911249084, intended for various Scheppach lawn mowers, including certain versions manufactured from July 2021 onwards.

We also offer the air filter cover, part number 5911247068, used on certain Scheppach and Woodstar lawn mowers.

Replacing the filter or its cover may be necessary in cases of severe contamination, cracks or defective fastening.

It is essential to verify exact compatibility with the engine fitted to your Parkside PBRM51A1 before ordering these components.

Spark Plug and Recoil Starter for Parkside Lawn Mower

The spark plug produces the spark required to ignite the air-fuel mixture inside the cylinder.

We offer the F6TC spark plug, part number 3906201048, intended for various Scheppach lawn mowers and cultivators.

A worn or fouled spark plug may cause starting difficulties, ignition misfires or irregular engine operation.

Our catalogue also includes the recoil starter, part number 5911244072, intended for various compatible Scheppach, Parkside and Woodstar lawn mowers.

The recoil starter allows the engine to be turned over manually for starting.

A broken starter rope, defective recoil spring or damaged engagement mechanism may require replacement of the starter.

Before ordering, check the original part numbers and technical specifications.

Rear Wheel and Wheel Cover for Parkside PBRM51A1 Lawn Mower

The wheels provide stability and make it easier to move the lawn mower across the ground.

Our catalogue includes the rear wheel, part number 3911250012, intended for various Parkside lawn mowers according to the compatibility lists.

We also offer the rear wheel, part number 3911219011, measuring 200 mm in diameter, for certain compatible machines.

These two part numbers must not be considered interchangeable without prior verification.

Our selection also includes wheel covers, part numbers 3911250011 and 3911219009, intended for various Parkside models.

A damaged wheel may cause movement difficulties, vibrations or abnormal wear of fastening components.

Before ordering, it is important to compare the diameter, hub shape, central bore, any drive mechanism and original part number.

Grass Collector Support and Rear Wheel Housing

The grass collector of a lawn mower collects part of the cut grass during mowing.

Its supporting system must remain in good condition to ensure correct installation on the machine.

We offer the grass collector support, part number 3911250009, intended for various compatible Scheppach and Parkside lawn mowers.

Our catalogue also includes the rear wheel housing, part number 5911241022, with an internal diameter of 200 mm and intended for certain Scheppach lawn mowers.

These components must be selected according to the exact configuration of the machine.

Before replacing them, it is advisable to check the mounting points, dimensions and references shown in the manufacturer's exploded parts diagrams.

Exhaust and Exhaust Gasket for Lawn Mower Engine

The exhaust system of a petrol engine allows the gases produced by combustion to be discharged.

Our catalogue includes the exhaust assembly, part number 5911247061, intended for various Scheppach and Parkside lawn mowers and cultivators according to the compatibility information.

We also offer the exhaust gasket, part number 5911247066, intended for certain Scheppach lawn mowers and cultivators.

A damaged exhaust can cause unusual noises, gas leaks or deterioration of its mounting points.

The gasket helps maintain a seal between the relevant assembled components.

Work on the exhaust system must always be carried out when the engine has completely cooled down to avoid the risk of burns.

Magnetic Flywheel, Pin and Other Mechanical Components

The engine and mechanical assemblies of a petrol lawn mower contain various components required for correct operation.

We offer the magnetic flywheel, part number 5911238040, intended for various Scheppach, Parkside and Woodstar lawn mowers according to the relevant compatibility lists.

The magnetic flywheel is involved in engine operation and may form part of the ignition system depending on its design.

Our catalogue also includes the pin, part number 5911216015, measuring Ø5 x 21.6 mm and intended for certain Scheppach and Woodstar lawn mowers.

We also offer the belt guard, part number 5911259006, intended for various compatible Scheppach, Woodstar and Parkside lawn mowers.

This guard helps protect the relevant transmission components according to the machine design.

These parts must always be selected according to the original part numbers and technical specifications.

Cleaning Hose Connector for Lawn Mower Deck

Regular cleaning of the mower deck helps prevent grass clippings and residues from accumulating underneath the machine.

Our catalogue includes a garden hose connector for cleaning certain Scheppach and Woodstar lawn mowers.

This connector is intended for machines equipped with the corresponding cleaning system and allows a water hose to be connected to the cleaning arrangement provided by the manufacturer.

It must not be fitted to a machine without this system unless its suitability has been technically confirmed.

When cleaning the lawn mower, always follow the operating manual, particularly the precautions concerning the engine, cutting components and parts sensitive to water.

How to Identify the Correct Spare Part for Parkside PBRM51A1

Before ordering a spare part for your Parkside PBRM51A1 lawn mower, it is essential to identify the exact version of your machine.

Several details can help you select the correct component:

  • Exact model: Parkside PBRM 51 A1 or PBRM51A1.
  • IAN number: generally shown on the rating plate or in the machine documentation.
  • Actual manufacturer: to distinguish between different production versions.
  • Original part number: when indicated on the component or in an exploded parts diagram.
  • Dimensions: particularly important for blades, belts, wheels and cables.
  • Manufacturing date: certain engine parts may vary between production batches.

Probois Machinoutils supplies Parkside spare parts for machines manufactured by Scheppach. Components from machines produced by other manufacturers must not automatically be considered interchangeable.

Some part numbers in this category are also used on other Scheppach, Parkside or Woodstar lawn mowers. Their presence in our catalogue does not therefore guarantee compatibility with every version of the Parkside PBRM51A1.

We recommend checking the compatibility information on each product page and comparing the specifications with those of the original component.

Maintaining Your Parkside PBRM 51 A1 Lawn Mower for a Longer Service Life

Regular maintenance helps preserve the performance of your Parkside PBRM 51 A1 petrol lawn mower and reduce the risk of breakdowns.

After each use, it is advisable to remove grass residues accumulated underneath the mower deck while following the manufacturer's safety instructions.

The blade should be inspected regularly for excessive wear, deformation or loss of sharpness.

The air filter, spark plug and fuel supply system must be checked according to the manufacturer's maintenance recommendations.

The wheels, control cables and transmission components should also be inspected to identify signs of wear.

Before carrying out any maintenance, switch off the engine and allow it to cool. Take the necessary precautions to prevent accidental starting, including disconnecting the spark plug cap when required by the maintenance procedure.

Prompt replacement of damaged components can often prevent certain mechanical problems from becoming more serious.

Probois Machinoutils: Your Specialist in Parkside Lawn Mower Spare Parts

At Probois Machinoutils, we specialise in supplying machinery, accessories and spare parts for garden and workshop equipment.

Our experience with Scheppach and Woodstar machines enables us to offer various part numbers also used on certain compatible Parkside machines.

In this category dedicated to the Parkside PBRM51A1 lawn mower, you will find the 510 mm cutting blade, carburettor, primer bulb, transmission components, rear wheels, recoil starter, air filtration parts and various engine maintenance components.

Our selection may change depending on supplier availability and the part numbers offered by manufacturers.

If you are looking for a component that does not appear in our catalogue, you can provide us with the exact model of your lawn mower, its IAN number and, if possible, the original part number so that we can investigate potential sourcing options.

Replacing a worn blade, damaged wheel or defective transmission component is often a cost-effective way to extend the useful life of your equipment.

Discover our spare parts for Parkside PBRM51A1 lawn mower and select the correct part number for your machine to carry out maintenance and repairs under suitable conditions.