Flywheel of the Bernardo TK200RN and TK200RSN table saw
Flywheel of the Bernardo table saw
Flywheel of the Bernardo table saw
System for raising and lowering the blade for circular saw on table Bernardo TK200RN and TK200RSN
Angle guide for table saw Bernardo TK200RN and TK200RSN
Light plate 27,4x7 cm for Bernardo table saw TK200
Protective cap for circular and combination saws as Holzmann TS200
Pulley for circular saw Holzmann TS250, Holzmann TS200 and Bernardo TK200
Switch for Scheppach HBS300 and Scheppach HBS300XWB band saws and Scheppach HS260L table saw or HD12 chip vacuum cleaner
Blade clamping flange on different Kity and Scheppach circular saws
Rod operating the flywheel of the circular saw Holzmann K5-260, Bernardo CWM250 and Bernardo FK200R
Turning pole for the circular saw on Holzmann K5-260, Bernardo CWM250 or FK200R
Sawing and spindle moulding sliding table featuring a 400 x 250 mm table, an extendable fence and a vertical hold-down clamp. Compatible with numerous Kity, Scheppach, Woodster, Bernardo and Holzmann circular saws, spindle moulders and combination woodworking machines.
The Bernardo TK200 and TK250 table saws are woodworking machines designed for cutting timber and wood-based materials in a workshop. Used by woodworking enthusiasts, demanding DIY users and craftspeople, these machines allow a variety of sawing operations thanks to their worktables, rip fences and adjustable saw blade mechanisms.
The Bernardo TK200R, TK200RS, TK250R and TK250RS, together with the TK200RN, TK200RSN, TK250RN and TK250RSN variants, belong to this family of circular table saws.
Depending on the model and its equipment, these machines can be used for rip cuts, crosscuts and angled cuts on materials suitable for woodworking, within the operating limits specified by the manufacturer.
Like any woodworking machine, a table saw contains numerous mechanical, electrical and adjustment components that may become worn or damaged over time.
At Probois Machinoutils, we offer a selection of spare parts for Bernardo TK200 and TK250 table saws to help users maintain their equipment, replace defective components and carry out necessary repairs.
Our catalogue includes components such as blade height adjustment handwheels, blade raising and lowering mechanisms, mitre gauges, table inserts, motor pulleys, switches and transmission parts.
Replacing a worn or damaged component can often restore the machine's performance without requiring the purchase of an entirely new table saw.
The Bernardo TK200 and TK250 table saws are available in several versions, with differences in design and equipment depending on the model.
The R, RS, RN and RSN variants should therefore not automatically be considered identical when selecting spare parts.
Depending on the machine, differences may involve the frame, adjustment mechanisms, guiding equipment or other components.
The TK200 range uses saw blades with a nominal diameter of 200 mm, while the TK250 models are designed for 250 mm blades, according to the specifications of each version.
This difference must be taken into account when selecting accessories and components associated with the cutting system.
Before ordering a replacement part for a Bernardo TK200 or TK250, it is essential to check the exact reference of your machine.
We recommend consulting the machine identification plate and, where available, the manufacturer's exploded parts diagram.
These details help identify suitable components and reduce the risk of ordering incompatible parts.
The blade height adjustment handwheel is an important component of a circular table saw.
It allows the operator to adjust how far the blade projects above the worktable according to the thickness of the material and the cutting operation.
A damaged or cracked handwheel, or one that no longer engages correctly with its adjustment mechanism, can make blade height adjustment difficult.
In this category, you can find a blade raising and lowering handwheel for Bernardo TK200RN and TK200RSN table saws.
This replacement component can be used when the original handwheel is damaged, provided that compatibility with the exact machine version has been confirmed.
Before replacing the handwheel, it is also advisable to inspect the adjustment shaft and the associated mechanism.
Difficulty adjusting the blade height may result from a damaged handwheel, but it can also be caused by a bent shaft, worn nut or seized lifting mechanism.
Correctly identifying the defective component is therefore essential before carrying out repairs.
The blade raising and lowering mechanism allows the cutting height of a circular table saw to be adjusted.
This system should operate smoothly to ensure accurate settings and prevent jamming.
Over time, accumulated sawdust, insufficient maintenance or mechanical wear may make the mechanism increasingly difficult to operate.
A mechanism that requires excessive force, develops abnormal play or no longer adjusts the blade correctly should be inspected.
Our catalogue includes a blade raising and lowering mechanism for Bernardo TK200RN and TK200RSN models.
Associated components, including certain adjustment shafts and nuts, may also be available for compatible machines.
When adjustment becomes difficult, we recommend cleaning accessible parts of the mechanism and checking the condition of its fasteners and moving components.
A bent, damaged or excessively worn part should be replaced with a suitable reference.
The motor pulley on a circular table saw helps transfer power from the motor to the cutting mechanism on machines equipped with a belt drive system.
It must be correctly secured and aligned to ensure smooth and consistent operation.
A damaged pulley or one showing abnormal wear may cause vibrations, unusual noises or drive transmission problems.
Our catalogue includes a motor pulley compatible with certain Bernardo TK200 table saws, also listed for selected Holzmann TS200 and TS250 machines.
Before ordering, it is important to verify the original pulley's dimensions, bore, profile and fastening system.
The condition of the drive belt and the alignment of the transmission components should also be inspected.
A loose, worn or unsuitable belt can reduce transmission efficiency and place unnecessary strain on other mechanical parts.
Pulley replacement must always be carried out with the machine disconnected from the electrical supply and in accordance with the manufacturer's instructions.
A table saw mitre gauge helps guide workpieces during certain crosscutting and angled cutting operations.
It contributes to maintaining a consistent cutting angle when the material is correctly positioned and supported.
A damaged, bent or excessively loose mitre gauge may reduce cutting accuracy.
We offer a mitre gauge designed for a 17 mm T-slot, compatible with Bernardo TK200RN and TK200RSN table saws and other machines featuring a suitable table slot.
Before purchasing a replacement mitre gauge, it is essential to check the dimensions and shape of the slot in your machine's table.
An accessory that has excessive play or does not slide correctly should not be used.
Depending on the machine and the required operation, additional equipment such as a compatible sliding table may also improve workpiece guidance.
However, the compatibility of the sliding table and its mounting components must be confirmed for each model.
The table saw throat plate, also known as a table insert or blade insert, is positioned around the saw blade.
It helps maintain a continuous work surface while providing the clearance necessary for the blade to pass through the table.
A cracked, warped or poorly secured throat plate can interfere with the movement of workpieces and create a safety hazard during cutting.
In this category, we offer a table insert for Bernardo TK200 table saws, with stated dimensions of 27.4 × 7 cm.
Before ordering this part, it is important to compare its dimensions and shape with the original insert.
The mounting system and the clearance required for blade movement should also be checked.
A throat plate must be installed correctly and must never come into contact with the blade, including during permitted blade height and tilt adjustments.
The electrical system of a Bernardo table saw includes several components required for starting and operating the machine.
Depending on the version, these may include an on/off switch, protective devices and other electrical components.
A defective switch can cause starting difficulties, unexpected shutdowns or prevent the machine from starting altogether.
Our catalogue includes a KJD12-type 16 A switch, intended for various woodworking machines when its specifications and installation arrangement match those of the original equipment.
However, this switch should not automatically be considered compatible with every Bernardo TK200 or TK250 model.
Before replacing an electrical component, it is essential to verify its reference, electrical ratings, wiring arrangement and safety functions.
Electrical repairs must be carried out by a competent person with the machine disconnected from the power supply.
Original safety devices must never be removed, bypassed or modified in a way that compromises their function.
The blade guard for a circular table saw is an essential component designed to reduce the risk of accidental contact with the saw blade during operation.
Depending on the machine, it may be associated with the riving knife and include a connection for dust extraction close to the cutting area.
A cracked, broken or incorrectly secured blade guard should be replaced with a suitable component.
Our selection includes guards intended for certain table saws equipped with 200 mm blades.
However, blade diameter alone is not sufficient to confirm guard compatibility.
The mounting arrangement, dimensions and compatibility with the machine's riving knife must also be checked.
It is essential to retain the safety devices specified by the manufacturer and never operate a table saw when the required guards or protective components are missing or defective.
A Bernardo TK200 or TK250 table saw may develop various symptoms indicating that maintenance or repair is required.
When blade height adjustment becomes difficult, the handwheel, adjustment shaft, nut and raising and lowering mechanism should be inspected.
If the machine produces unusual vibrations, check the blade mounting, transmission components and overall condition of the cutting system.
Abnormal noises may originate from a bearing, pulley or another mechanical component.
If cutting performance decreases, it is important to inspect the working conditions, blade condition, transmission system and motor operation.
When the saw no longer starts, the cause may involve the power supply, a safety device, the switch or another electrical component.
These symptoms may have several possible causes. A proper diagnosis is therefore recommended before ordering a Bernardo table saw spare part.
If a malfunction occurs, the machine must be switched off and disconnected from the electrical supply before inspection.
Regular maintenance helps preserve the accuracy and reliability of a Bernardo circular table saw.
After use, accumulated sawdust should be removed from the work surface and accessible areas of the machine.
Adjustment mechanisms should be kept clean and maintained according to the manufacturer's recommendations.
It is also important to inspect mechanical fasteners, the condition of the fences and the operation of safety guards.
The saw blade must be suitable for the material being cut and maintained in good condition.
A blunt or damaged blade may create excessive cutting resistance, reduce cutting quality and place unnecessary strain on the motor.
Using a suitable dust extraction system helps reduce the accumulation of sawdust and airborne dust in the machine and workshop.
Before each use, check the operation of the controls, the presence and correct positioning of the riving knife and blade guard, and the stability of the machine's adjustments.
These practices help reduce premature wear and maintain safer, more consistent working conditions.
Replacing a worn component on a Bernardo table saw is often a cost-effective solution when the machine remains in good overall condition.
A broken handwheel, damaged pulley or deteriorated throat plate does not necessarily justify replacing the entire saw.
When a suitable replacement part is available, repairing the machine can help restore its correct operation.
This approach also helps extend the useful life of equipment and reduce waste associated with prematurely replacing woodworking machinery.
However, it is essential to select parts that are compatible with the exact machine model and to inspect the saw's overall condition before returning it to service.
For components associated with the cutting system and safety equipment, correct installation and appropriate repairs are particularly important.
At Probois Machinoutils, we offer spare parts for Bernardo TK200 and TK250 circular table saws to help woodworking machine owners maintain and repair their equipment.
Our selection includes adjustment handwheels, blade raising and lowering mechanisms, mitre gauges, throat plates, motor pulleys, switches, shafts, nuts and sawing accessories.
Certain components may also be suitable for machines from other manufacturers, including Holzmann, Kity and Scheppach, when compatibility is specifically stated.
Before ordering, we recommend checking the exact model and version of your table saw, together with the reference of the required component.
If the part you need is not listed in our catalogue, our customer service team may be able to help identify a suitable reference using the machine identification plate or exploded parts diagram, subject to manufacturer availability.
Discover spare parts for Bernardo TK200, TK200R, TK200RS, TK200RN, TK200RSN, TK250, TK250R, TK250RS, TK250RN and TK250RSN table saws at Probois Machinoutils to maintain, repair and extend the service life of your woodworking equipment.