Turbine dia 350x110x24 mm for differents dust collector
400V motor for Bernardo DC650/DC700/DC750 chip vacuum cleaner
400V motor for Bernardo Holzmann ABS4560 chip vacuum cleaner from 2020
Discover our selection of spare parts for the Holzmann ABS4560 dust collector, designed to make repairing and maintaining your dust extraction equipment easier. Used in woodworking and cabinetmaking workshops, this dust collector removes wood chips produced by woodworking machines and helps keep the working environment clean.
The Holzmann ABS4560 is a three-phase, 400 V workshop dust collector with a stated motor power of 5,100 W and a nominal airflow of 4,560 m³/h. It is designed to meet the needs of workshops using several woodworking machines.
Over time, certain components may wear out or become damaged. A damaged impeller or faulty motor can put the dust collector out of service.
At Probois Machinoutils, we offer a replacement impeller and two distinct motor versions depending on the production year of your ABS4560.
Important: the motor intended for machines manufactured before 2020 and the motor designed for machines manufactured from 2020 onwards must not be assumed to be interchangeable.
The impeller is an essential component of a dust collector. By rotating at high speed, it generates the airflow that transports wood chips from woodworking machines to the collection bags.
This category includes a replacement impeller measuring 350 × 110 × 24 mm, offered for certain dust collectors equipped with three or four collection bags, according to the compatibility list provided on its product page.
Its stated dimensions are:
Outside diameter: 350 mm.
Height: 110 mm.
Bore diameter: 24 mm.
These measurements are essential for identifying the part, but they are not sufficient to guarantee compatibility.
You must also check the blade orientation, mounting system, housing configuration and exact machine reference.
An impeller with apparently identical dimensions may have a different blade orientation or an incompatible mounting arrangement.
Before ordering, always consult the list of compatible machines provided on the product page.
The impeller, also known as the fan wheel, is driven by the electric motor.
Its rotation generates the airflow required to extract wood chips and transport them through the ducting.
It plays a direct role in the airflow and operation of the extraction system.
An impeller in good condition should rotate freely without abnormal contact with the housing.
Its blades must be intact, and it must be securely mounted.
Deformation or damage can cause vibrations, unusual noises and reduced performance.
A damaged impeller must always be replaced with a part whose mechanical compatibility has been confirmed.
Impeller replacement may be necessary in several situations:
One or more blades are broken or deformed.
The impeller has a crack or visible damage.
Significant vibrations occur during operation.
A rubbing noise comes from the housing.
The impeller mounting is damaged.
An impact with a foreign object has caused deformation.
A mechanical defect in the impeller has been confirmed during diagnosis.
A piece of wood or another object accidentally drawn into the system may strike the blades.
If vibrations suddenly occur, stop the machine immediately.
An unbalanced impeller must not continue operating, as it may damage other components and present a risk to the user.
After disconnecting and securing the dust collector, have the impeller and surrounding mechanical components inspected.
This category offers motor reference 98-14100, intended in particular for certain Holzmann ABS4560 versions manufactured before 2020.
This motor is also listed for several Bernardo dust collectors, including the DC600, DC650CF, DC700 and DC750CF models, subject to the exact compatibility information on the product page.
It provides a potential repair solution for a dust collector whose original motor has a confirmed fault.
Before ordering, always check the manufacturing date of your ABS4560.
The original motor reference and the information on its identification plate are also important for selecting the correct part.
This motor, intended for versions manufactured before 2020, must not be ordered for a more recent ABS4560 without explicit confirmation of compatibility.
If your machine was manufactured close to the changeover year, we recommend sending us its serial number and a photograph of the motor's identification plate.
We also offer a replacement three-phase motor for the Holzmann ABS4560 dust collector manufactured from 2020 onwards.
This distinction is particularly important: a production change may result in modifications to component specifications or mounting arrangements.
Two motors intended for a model with the same name are therefore not necessarily interchangeable.
To identify the correct motor for your machine, check:
The exact Holzmann ABS4560 model reference.
The manufacturing year.
The serial number.
The voltage and electrical specifications.
The original motor reference, if legible.
The compatibility information provided on the motor's product page.
The motor must correspond to your dust collector's version and be installed in accordance with the manufacturer's recommendations.
If you are unsure, do not order solely on the basis of a photograph or visual similarity.
The manufacturing date is an essential factor when choosing between the two motors offered in this category.
Start by checking the identification plate on your dust collector.
Depending on the machine, the available information may include a manufacturing date, serial number or other details that help identify its version.
You can also consult the documentation supplied with the machine and the references shown on the original motor.
Please note that the purchase date does not necessarily correspond to the manufacturing date.
A machine purchased in 2020 or later may have been manufactured earlier.
If you cannot determine your ABS4560's version with certainty, contact us before ordering the motor.
Send us clear photographs of the dust collector's identification plate and the motor's identification plate, together with the serial number.
This information will help us identify the appropriate part.
A dust collector that refuses to start does not necessarily have a failed motor.
Several possible causes should be considered, including:
Missing or incorrect electrical supply.
A tripped protection device.
A defective switch or control component.
A damaged electrical connection.
A blocked impeller.
An electrical or mechanical motor fault.
On a three-phase machine, the power supply and protective devices must be checked by a qualified person.
If the motor produces an unusual noise, overheats or fails to start, stop attempting to switch it on.
Repeated starting attempts when a fault is present may cause further damage.
Replacing the complete motor should only be considered after the cause of the fault has been identified.
Work on the electrical system must be entrusted to a qualified professional.
A reduction in suction power does not automatically mean that the motor needs replacing.
Before ordering a part, several points should be checked.
Collection bags too full: Excessive accumulation of wood chips may interfere with the operation of the system.
Clogged filters: A blocked filter element may restrict airflow.
Blocked hoses: A build-up of wood chips or a foreign object may reduce the passage of air.
Leaking connections: Air leaks may reduce extraction efficiency at the connected machines.
Unsuitable extraction ducting: Ducts that are too narrow, too long or fitted with numerous bends may cause pressure losses.
Damaged impeller: Deteriorated blades may alter airflow and generate vibrations.
Motor fault: An electrical or mechanical problem may prevent the equipment from operating normally.
A systematic diagnosis helps avoid unnecessarily replacing a component that is still functioning correctly.
The impeller must be kept in a condition that allows smooth rotation without obstruction.
Before any inspection, switch off the dust collector, unplug it and wait until all rotating components have stopped completely.
Never attempt to remove a piece of wood or trapped chips while the machine is running.
Once the machine has been made safe, an appropriate inspection may reveal signs of impact, deformation or abnormal rubbing.
Also check that no foreign objects are likely to enter the extraction system.
If the impeller shows visible damage, do not use the machine until suitable inspection and repair have been carried out.
A damaged impeller must not be straightened or modified using improvised methods.
Replacement must be performed using a compatible part and in accordance with the manufacturer's instructions.
Regular maintenance of the extraction system helps reduce certain risks of malfunction.
Check the filling level of the collection bags and maintain the filtration components according to the manufacturer's recommendations.
Inspect the condition of hoses and connections regularly.
Pay attention to changes in operating noise, vibrations and any unusual smells.
If the motor overheats or an electrical protection device trips repeatedly, stop the machine and have the cause investigated.
Do not repeatedly reset a protective device without diagnosing the problem.
Also ensure that the motor's ventilation areas remain unobstructed, in accordance with the manufacturer's instructions.
A new motor installed in a dust collector with an unresolved mechanical fault may also become damaged.
It is therefore essential to check the overall condition of the machine before returning it to service.
Selecting a replacement part requires accurate identification of your dust collector.
Before ordering, record:
The exact machine model.
Its supply voltage.
Its serial number.
Its manufacturing month and year, where available.
The part reference and position number on the exploded parts diagram.
The specifications of the original component.
For an impeller, check the dimensions, bore diameter, blade orientation and mounting system.
For a motor, always check the relevant production period, particularly the distinction between versions manufactured before 2020 and those manufactured from 2020 onwards.
The presence of a part in a category does not remove the need to consult its individual product page.
IMPORTANT: BEFORE PURCHASING, always check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the spare part's product page. Where necessary, also verify the month and year of manufacture and your machine's serial number.
When a workshop dust collector develops a fault, replacing the entire machine is not always necessary.
If the impeller is damaged or the motor has a confirmed fault, replacing the affected component may allow the machine to be returned to service.
This approach makes it possible to retain the other parts of the dust collector when they are still in good condition.
However, the repair must be preceded by a thorough diagnosis.
If the impeller is defective, it is particularly important to check that no other mechanical components have been damaged.
In the event of a motor failure, it is important to ensure that the electrical system and operating conditions do not present any problems that could cause another failure.
A suitable repair depends on accurately identifying the part and respecting the original specifications.
At Probois Machinoutils, we offer spare parts for the Holzmann ABS4560 dust collector, including a replacement impeller and motors corresponding to different manufacturing periods.
Our selection includes:
An impeller measuring 350 × 110 × 24 mm, subject to the list of compatible machines.
Motor reference 98-14100 for certain ABS4560 versions manufactured before 2020.
A three-phase motor for the Holzmann ABS4560 manufactured from 2020 onwards.
If you are looking for another part for your dust collector, please provide the exact model reference, serial number and, if possible, the component's position number on the exploded parts diagram.
Photographs of the original part and the machine's identification plate may also help identify the correct replacement.
Order your Holzmann ABS4560 dust collector spare parts from Probois Machinoutils to carry out a suitable repair, maintain your equipment and extend its service life.
