Kit travel Holzmann UFE410FLEX, form expandable frame, for woodworking machines of up to 250 kg approximately.
Universal moving base Bernardo UFW300 for machine 300 kg max
Move your machines easily and without effort, up to 220 kg, with this robust kit of travel.
Bernardo UFW600 universal adaptable to almost every machine footprint caused by telescopic system
Move your machines easily and without effort, up to 400 kg, with this robust kit of travel.
Move your machines easily and without effort, up to 400 kg, thanks to this kit move, adaptable on any type of handset wood.
The Holzmann UFEK5 mobile base kit is specifically designed to make it easy to move wood combination machines in your workshop. Strong, practical, and easy to install, this machine mobility kit offers flexibility while maintaining excellent stability.
Move your machines easily and without effort, thanks to this kit move, adaptable on any type of handset wood.
Connection bar 2 x 950 mm for Bernardo UFW300 and UFW600 mobile base
The Holzmann SLRF4 is a professional heavy-duty cargo pallet trolley system designed for the safe transport of industrial machinery, woodworking machines, heavy pallets and workshop equipment up to 4 tons. It is an ideal solution for moving heavy loads easily on flat and solid floors.
The Holzmann SLRF8 is a professional heavy-duty cargo pallet trolley system designed for the safe transport of industrial machinery, woodworking machines, heavy pallets and workshop equipment up to 8 tons. Ideal solution for moving heavy loads on flat and solid floors.
Moving kit for Bernardo HBS210 / HBS275 metal band saws
Special moving carriage for planer and thicknesser
Special moving carriage for planer and thicknesser
Travel kit with drawbar and wheels specially adapted for jeans band saws cabinetmaker BS480 and BS600
Rear fixed castor for travel kit
Front swivel caster for Holzmann moving kit
A machine moving kit is a particularly useful piece of equipment for improving the organisation of woodworking, cabinetmaking, engineering and metalworking workshops. It makes it easier to move certain stationary machines, which are often heavy and bulky, so that their position can be adapted to the requirements of each task.
In a workshop where several machines share a limited amount of space, installing a mobile machine base can provide a practical solution for saving space and improving accessibility.
At Probois Machinoutils, we offer a selection of machine moving kits for woodworking and metalworking machinery from Holzmann, Bernardo, Holzprofi and JET, including solutions designed for specific machine models.
Our range includes adjustable mobile bases, swivel-wheel systems, moving kits with lifting handles, dedicated machine mobility systems and heavy-duty machinery moving skates.
These products are suitable for professionals and DIY enthusiasts who want to create a more flexible and better-organised workshop.
Stationary workshop machines often occupy a considerable amount of floor space. A bandsaw, planer thicknesser or combination woodworking machine requires not only enough room for the machine itself but also sufficient clearance to handle workpieces safely.
When workshop space is limited, keeping every machine permanently in the same position can become difficult.
A machine moving kit for woodworking machinery allows compatible equipment to be repositioned when necessary, helping to free up working areas and making certain cleaning and maintenance operations easier.
This mobility is particularly useful in smaller workshops where several machines are not used simultaneously.
It also makes it possible to reorganise the available space according to the dimensions of the materials being processed.
However, choosing a suitable moving system is essential.
The kit must be compatible with the machine's weight, dimensions and base configuration.
Moving operations should always be carried out on a suitable floor, following the manufacturer's instructions and without compromising the stability of the equipment.
An adjustable machine moving kit is one of the most versatile solutions for making certain stationary workshop machines mobile.
Its design generally features an adjustable frame that can be adapted to different machine base dimensions.
This configuration is particularly useful for workshop owners who need to move several types of machinery with different footprints.
Among the models available, the Holzmann UFE410FLEX is an adjustable moving kit designed for machines weighing up to 250 kg.
The Bernardo UFW300 features an adjustable frame suitable for machines weighing up to 300 kg, while the Bernardo UFW600 is designed for loads of up to 600 kg.
These maximum capacities correspond to the specifications of the respective models and must be respected during installation and use.
Choosing an adjustable mobile machine base also involves checking the minimum and maximum frame dimensions, load distribution and the shape of the machine's supporting structure.
A correctly sized base makes repositioning equipment easier while allowing the machine to remain suitably supported during operation.
A mobile machine base with swivel castors offers greater manoeuvrability than a system fitted exclusively with fixed wheels.
Depending on its design, it can allow machinery to be moved in several directions, making positioning easier in a crowded workshop.
This feature is particularly useful when equipment must be moved between workbenches, storage units and other machines.
The Holzprofi UNI-220OD and UNI-400OD are adjustable omnidirectional moving kits equipped with four directional castors.
The UNI-220OD is designed for machines weighing up to 220 kg, while the UNI-400OD has a stated maximum load capacity of 400 kg.
These systems can meet the needs of users looking for an omnidirectional mobile machine base for compatible woodworking machinery.
Before purchasing, it is important to check the frame dimensions, maximum permitted load and machine stabilisation requirements.
Improved mobility must never come at the expense of stability during machining operations.
Some machine moving systems use a lifting handle or lever mechanism to make machinery easier to reposition.
This type of system can be particularly suitable for machines that must remain stable during operation but need to be moved occasionally.
The operating principle varies depending on the model.
A lifting mechanism allows the wheels to support the machine during movement before the equipment is returned to its working position according to the manufacturer's instructions.
The UFE450 machine moving kit is designed for woodworking machines and combination machines weighing up to 400 kg.
It features a moving system incorporating wheels and a manoeuvring handle.
Our selection also includes a moving kit with swivel wheels and a handle for machines weighing up to 500 kg.
These solutions can be useful for workshop owners looking for a balance between mobility and a stable working position.
Before moving any equipment, it is essential to ensure that the kit has been correctly installed and that the machine cannot tip over during manoeuvring.
A combination woodworking machine brings several machining functions together in a single piece of equipment.
Depending on its design, it may combine sawing, surface planing, thicknessing, spindle moulding and sometimes mortising.
These machines can be particularly heavy and may require different working clearances depending on the operation being performed.
Installing a moving kit for a combination woodworking machine can therefore make workshop organisation considerably easier.
It allows compatible machines to be repositioned to provide additional clearance when handling long wooden workpieces.
The Holzmann UFEK5 is a moving kit specifically designed for certain compatible combination woodworking machines.
Other universal moving systems may also be suitable, provided that the base dimensions, maximum load capacity and manufacturer's recommendations are carefully checked.
It is important not to select a moving kit based solely on its stated weight capacity.
The geometry of the machine base, the position of its centre of gravity and its supporting points must also be considered.
A planer thicknesser can be difficult to move because of its weight, dimensions and the arrangement of its tables.
In woodworking workshops, however, repositioning this type of machine can be useful for providing sufficient space for feeding and receiving timber.
A moving kit for planer thicknessers makes this possible when the machine and mobility system are compatible.
Our selection includes a moving kit designed for certain JET planer thicknessers with working widths of 310 and 410 mm, as well as a solution intended for heavy-duty planer thicknessers.
These products meet more specific requirements than universal adjustable mobile bases.
It is therefore essential to check the exact machine models concerned, mounting dimensions and technical specifications of the moving kit.
Before moving the machine, all movable components must be secured in accordance with the manufacturer's instructions.
A suitable mobile base can be particularly beneficial in compact woodworking workshops where working space must be adapted to different machining operations.
Bandsaws require particular attention when being moved because of their height, weight and centre of gravity.
A suitable moving kit can make repositioning easier without resorting to inappropriate handling methods.
For woodworking applications, we offer a bandsaw moving kit designed for certain machines with wheel diameters ranging from 460 to 800 mm.
This type of system can help free up workshop space or provide additional clearance when working with large pieces of timber.
Our catalogue also includes a specific moving kit for certain Bernardo and Holzmann metalworking bandsaws, including compatible models from the HBS210, HBS275, BS210 and BS275 ranges.
For these machines, it is essential to verify that the moving system is compatible with the exact bandsaw model and its supporting base.
The total weight and stability of the complete assembly must also be considered before installation.
A properly selected mobile base for a bandsaw can help improve workshop flexibility while maintaining the conditions required for safe operation.
For particularly heavy equipment, a conventional mobile base with castors may not be suitable.
In such cases, heavy-duty machinery moving skates provide an alternative for handling industrial machines and bulky equipment.
Our range includes the Holzmann SLRF4 and SLRF8, designed for moving heavy loads.
The SLRF4 has a stated load capacity of 4 tonnes, while the SLRF8 is rated for up to 8 tonnes, subject to the manufacturer's operating conditions.
These systems differ from mobile bases intended to remain permanently installed beneath a machine.
They are designed for occasional handling operations, such as reorganising a workshop or relocating heavy industrial equipment.
Their use requires particular attention to floor strength, load distribution and the lifting equipment needed to position the moving skates.
When handling very heavy machinery, operations must be carefully planned and carried out using suitable equipment and appropriate expertise.
Several factors should be considered before selecting a machine mobility kit.
The first is the total weight of the machine, including any fitted accessories.
The maximum load capacity of the moving kit must be sufficient and must comply with the manufacturer's conditions of use.
The next step is to measure the machine's base and check the adjustment range of the support.
The shape of the base is also important. Some machines have rectangular frames, while others feature specific supporting points or irregular base configurations.
The type of wheels affects manoeuvrability.
Fixed wheels may be suitable for certain movements, while swivel castors can provide greater flexibility in confined spaces.
The workshop floor must also be considered.
A level, sufficiently strong and unobstructed surface is generally necessary to move machinery under suitable conditions.
Finally, the stabilisation system and the machine's operating position must be checked.
A machine must not be operated in its moving position if the manufacturer requires it to be lowered onto its supports or locked before use.
Choosing the correct equipment helps make workshop movements easier without compromising the stability required for machining.
In addition to complete moving systems, certain accessories can be used to adapt or maintain existing equipment.
Our range includes a 915 mm extension for Bernardo UFW300 and UFW600 moving kits, designed to extend the adjustment possibilities of these models.
We also offer replacement castors for the Holzmann UFE410FLEX, including specific references for the rear fixed wheels and front swivel castors.
These components can be useful when a part needs replacing or when an existing moving kit requires an adjustment supported by the manufacturer.
Before ordering, it is important to check the exact reference of the moving kit to ensure that the selected accessory is compatible.
Using suitable replacement parts helps maintain the correct operation of the moving system.
Installing machine moving kits for woodworking and metalworking equipment can significantly improve workshop organisation.
In a limited space, machines can be repositioned according to the tasks being performed while maintaining the necessary clearances around working areas.
This flexibility is particularly useful for independent craftspeople and DIY enthusiasts working in multipurpose workshops.
It can also make cleaning behind certain machines easier and simplify workshop rearrangement when new equipment is installed.
A mobile workshop layout may allow several stationary machines to share the same working area at different times.
However, a machine moving kit does not replace the precautions required when handling heavy equipment.
Every movement must be performed with the machine switched off and under conditions appropriate to its weight, dimensions and stability.
The correct use of a suitable moving system helps create a practical and adaptable workshop environment.
At Probois Machinoutils, we offer a selection of machine moving kits and mobile machine bases suitable for different workshop configurations.
Our catalogue includes adjustable mobile bases from Holzmann and Bernardo, omnidirectional moving systems from Holzprofi, specific mobility kits for certain JET machines and heavy-duty machinery moving solutions.
Whether you are looking for a moving kit for a combination woodworking machine, a mobile base for a planer thicknesser, a bandsaw moving system or heavy-duty moving skates for industrial equipment, you can compare the available models according to their specifications.
Pay particular attention to maximum load capacity, dimensions, wheel configuration and compatibility with your machine.
Discover our range of machine moving kits and mobile bases for workshop machinery and create a more practical, organised and flexible working environment suited to your everyday requirements.
