Return spring diameter 55 mm for Holzmann SB3116RMN, SB4116HM and Jean l'ébéniste PCR3116E drill
Discover our selection of spare parts for the Holzmann SB3116RHN radial floor drill press, designed for the maintenance, repair and restoration of your machine. Replacing a worn or damaged component can extend the service life of your drill press while helping to maintain accurate and reliable operation.
The Holzmann SB3116RHN is a versatile radial floor drill press featuring an adjustable drilling head. Its radial design allows the drilling head to be repositioned to reach different drilling positions on the workpiece, providing greater flexibility than a conventional drill press.
The machine also uses a belt-driven transmission with several spindle speeds. Over time and with regular use, the drive belt, bearings, pulleys, spindle components, radial adjustment mechanisms and electrical components may become worn and require replacement.
The Holzmann SB3116RHN radial floor drill press consists of numerous components that can be replaced individually. Depending on availability, this category includes various SB3116RHN spare parts required for the maintenance and repair of your machine.
Available spare parts may include:
Our range of spare parts for the Holzmann SB3116RHN drill press is regularly updated according to the availability of replacement components from the manufacturer.
One of the main features of the Holzmann SB3116RHN is its radial drilling head adjustment system. This mechanism allows the position of the drilling head to be adjusted to suit different drilling operations and workpiece dimensions.
The shafts, guides, locking levers and other components of the radial mechanism are regularly operated when adjusting the machine. Wear or damage to one of these components can cause excessive play, make adjustment more difficult or prevent the drilling head from being securely locked in the required position.
When replacing an SB3116RHN radial adjustment component, it is particularly important to identify the exact position number on the exploded diagram to avoid ordering an incorrect part.
The Holzmann SB3116RHN uses a belt-driven transmission that allows different spindle speeds to be selected. The drilling speed is changed by repositioning the drive belt on the pulleys.
The Holzmann SB3116RHN drive belt is a wear part and should be inspected periodically. A loose, cracked, deformed or damaged belt can cause slipping, vibration, unusual noises or poor transmission of power from the motor.
The pulleys, shafts and other transmission components should also be inspected if the machine operates irregularly. Excessive play or a damaged component can affect spindle rotation and accelerate wear on other parts.
The spindle is one of the essential components of the Holzmann SB3116RHN radial floor drill press. It transmits rotational movement to the drill bit and should operate with minimal play to maintain good drilling accuracy.
The bearings ensure smooth guidance and rotation of the spindle. With regular use, they can gradually wear and cause vibration, unusual noises, overheating or excessive spindle play.
A worn SB3116RHN spindle bearing can also directly affect drilling accuracy. If unusual vibration or excessive play occurs, the complete spindle assembly and its bearings should therefore be inspected.
The drill chuck securely holds the drill bit during drilling operations. When replacing a drill chuck for the Holzmann SB3116RHN, an arbor or another associated component, it is essential to check the mounting type and dimensions of the original part.
Two drill chucks, arbors or spindle components may look very similar without necessarily being compatible. The reference number, mounting system and dimensions should therefore be carefully checked before ordering a replacement part.
The drilling table of the Holzmann SB3116RHN can be adjusted in height using a rack mechanism to accommodate workpieces of different sizes. It can also be positioned to suit different drilling operations.
The rack, crank handle, table support, clamping elements and adjustment mechanisms are regularly used during operation. Over time, some of these components may become worn, develop excessive play or become damaged.
Replacing a worn SB3116RHN table adjustment component can help restore smooth adjustment and secure positioning of the drilling table during operation.
The spindle feed mechanism controls the vertical movement of the spindle during drilling. The feed handles allow the operator to accurately control the downward movement of the drill bit into the workpiece.
The handles, shafts, springs and return mechanism components are used every time the machine is operated. A worn return spring, damaged handle or mechanism with excessive play can make the downward and upward movement of the spindle less smooth.
These components can be replaced individually when the corresponding part is available among our Holzmann SB3116RHN spare parts.
The Holzmann SB3116RHN includes various electrical components required for the operation and safety of the machine.
Depending on availability, this category may include various electrical spare parts for the Holzmann SB3116RHN, including switches, control components, protection components, motor and other electrical parts required to repair the drill press.
Before ordering an electrical component, it is essential to check the specifications of your machine and the original part. Visual similarity alone does not guarantee that a switch, motor or other electrical component is compatible.
Before carrying out any work on the electrical system, the machine must be completely disconnected from the power supply. Repairs requiring specific electrical expertise should be carried out by a suitably qualified person.
Regular maintenance helps reduce premature component wear and maintain the accuracy of your drill press. The condition of the drive belt, pulleys, bearings, spindle, drill chuck and various adjustment mechanisms should be checked periodically.
Particular attention should also be paid to the SB3116RHN radial adjustment mechanism. The sliding and adjustment surfaces should be kept clean, and the locking mechanisms should securely hold the drilling head in the selected position.
Chips and dust accumulating around the column, rack and adjustment mechanisms can interfere with adjustments and accelerate wear on certain components.
It is also advisable to monitor the machine for vibration, unusual noises or excessive play in the spindle or drilling head. Identifying a faulty component at an early stage can prevent its wear from causing damage to other Holzmann SB3116RHN components.
Before ordering a spare part for your Holzmann SB3116RHN radial floor drill press, consult the exploded diagram and spare parts list for your machine to accurately identify the required component and its position number.
This check is particularly important because some components may vary depending on the voltage, machine version or production period. A replacement part that looks similar to the component fitted to your drill press is therefore not necessarily compatible.
IMPORTANT: BEFORE PURCHASING, always check the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Depending on the component, you may also need to check the month and year of manufacture and the serial number of your machine.
Not all spare parts for the Holzmann SB3116RHN radial floor drill press are necessarily listed in our online catalogue. If you cannot find the component you need, consult the exploded diagram for your machine to identify its position number.
To help identify the correct spare part, provide the exact drill press model, serial number, manufacturing date and position number of the required component. For electrical components, also specify the voltage of the machine.
A photograph of the original component and its main dimensions can also help with identification when a part number has changed or when several versions exist.
A worn belt, faulty bearing, damaged radial adjustment component, switch or other defective part does not necessarily mean that the complete drill press needs to be replaced. Many mechanical and electrical components can be replaced individually to restore the machine.
Replacing the faulty component can help repair your Holzmann SB3116RHN radial floor drill press, restore correct operation and extend its service life.
Probois Machinoutils offers a constantly evolving range of spare parts for Holzmann drill presses to help with the maintenance, repair and restoration of your machines.
Browse our Holzmann SB3116RHN spare parts and use the exploded diagram together with the information shown on your machine to accurately identify the replacement part you need.
Shorten the category descriptionAdd a clearer purchase call to action
