Coals for radial saw Woodster, Scheppach, Parkside blade from 210 to 216 mm
Carbon brushes for Woodstar SL8LU and Scheppach TKS1500A1
Carbon brushes for Woodstar SL8LU and Scheppach TKS1500A1
External flange reference 3901105031 for Scheppach, Woodstar, Parkside, Dexter miter saw with 210 mm blade
Internal flange reference 3901105033 for miter saw Scheppach, Woodstar, Parkside, Dexter with blade 210 mm
This sprocket corresponding to the mark 76 for Scheppach HM216SPX, HM216X, Parkside PZKS2000B2
Blade guard for radial miter saw Scheppach, Parkside, et Woodster
Brush holder reference 3901204143 for radial miter saw Scheppach, Woodstar, Parkside and Dexter according to list below
Guide for radial miter saw Scheppach HM100LXU and MSS10
Inner flange reference 5901216009 for radial miter saw Scheppach, Parkside and Manupro
Motor 3901207035 for Scheppach, Woodster, Parkside and Dexter radial miter saw
Microswitch 3901204043 for Scheppach, Woodster, Dexter, Kity and Parkside radial mitre saws
Depth stop reference 3901227019 for Scheppach, Woodstar and Parkside mitre saws according to the following list : LIST OF COMPATIBLE MACHINES
Are you looking for a spare part for your Parkside mitre saw to repair your machine or replace a worn component? At Probois Machinoutils, we offer a selection of replacement parts for various Parkside mitre saws, including certain models that share components with machines manufactured or marketed under the Scheppach, Woodster, Woodstar, Kity and Dexter brands.
Parkside mitre saws are used to perform straight cuts, mitre cuts and, depending on the model, bevel cuts in wood. These machines are suitable for various woodworking applications, including cutting battens, skirting boards, mouldings and small wooden components.
Over time, certain mechanical or electrical parts may become worn, damaged or defective. A motor that no longer starts, worn carbon brushes, a broken blade guard or a faulty switch can prevent the machine from operating correctly.
Our catalogue of Parkside mitre saw spare parts helps you find the components needed to repair your equipment and extend its service life, provided that the machine can be safely restored to working condition.
This category includes various components designed for the maintenance and repair of selected Parkside mitre saws.
Depending on the machine model, you can find:
Each replacement part has its own technical specifications and compatibility requirements. It is therefore important to check your machine reference before ordering.
Carbon brushes for Parkside mitre saws are wear components found in electric motors equipped with brushes.
They maintain electrical contact with the motor commutator and are essential for the correct operation of the motor.
After prolonged use, carbon brushes may wear down and cause various problems:
We offer motor carbon brushes measuring 14.5 x 10.8 x 6.8 mm for certain Parkside, Scheppach, Woodster and Dexter mitre saws equipped with 210 to 216 mm blades.
However, these dimensions are not suitable for every Parkside mitre saw. Always compare the dimensions of the original brushes and check the compatible machine models listed on the product page.
A motor malfunction is not necessarily caused by worn carbon brushes. The commutator, armature or other electrical components may also be responsible for the problem.
The carbon brush holder is designed to keep the motor brushes correctly positioned and maintain proper contact with the commutator.
A broken, distorted or defective brush holder can interfere with the normal operation of the motor.
Our catalogue includes the carbon brush holder reference 3901204143, suitable for certain Scheppach, Woodstar, Parkside and Dexter mitre saws.
Before ordering this component, check its reference number and compatibility with your machine.
The inner blade flange for a Parkside mitre saw is an essential component of the blade fastening system.
Positioned on the drive shaft, it provides a supporting surface that helps keep the blade correctly centred.
It works together with the outer flange and the blade fixing bolt to secure the blade during operation.
A damaged or distorted inner flange can cause incorrect blade positioning, vibration or insufficient clamping.
We offer various inner blade flanges, including:
These references are not interchangeable without checking compatibility. Always verify the dimensions, shape and technical specifications before ordering.
The outer blade flange completes the blade fastening system on the motor shaft.
It helps distribute the clamping pressure and contributes to keeping the blade securely positioned during rotation.
A worn, distorted or damaged outer flange must be replaced with a suitable component.
Our catalogue includes the outer blade flange reference 3901105031, designed for selected Scheppach, Woodstar, Parkside and Dexter mitre saws equipped with a 210 mm blade.
When replacing a blade flange, it is important to check its diameter, bore and compatibility with the machine's drive shaft.
An incorrect blade flange can compromise blade fastening and create a serious safety hazard during operation.
The blade guard for a Parkside mitre saw is an essential safety device.
It helps restrict access to the saw blade when the blade is not engaged in the workpiece.
On many mitre saws, the movable blade guard automatically retracts when the cutting head is lowered and returns to its protective position when the head is raised.
A cracked, broken or jammed blade guard can prevent this mechanism from operating correctly.
We offer replacement blade guards for selected Parkside, Scheppach and Woodster mitre saws.
Before ordering, check the mounting points, guard shape and exact machine reference.
Never use a mitre saw with a missing, damaged or incorrectly functioning blade guard.
The motor of a Parkside mitre saw provides the power required to drive the saw blade.
A motor failure may prevent the machine from starting or cause a significant loss of power.
Our catalogue includes the electric motor reference 3901207035, suitable for certain Scheppach, Woodster, Parkside and Dexter sliding mitre saws.
Replacing a motor requires checking several technical characteristics:
A motor malfunction may also be caused by worn carbon brushes, a defective switch or another electrical problem. It is therefore advisable to identify the fault before ordering a complete replacement motor.
Repairs involving electrical components should only be carried out by someone with the necessary technical knowledge and qualifications.
The microswitch for a Parkside mitre saw is an electrical component used in certain control or safety systems.
Depending on the machine design, it may be involved in controlling an electrical mechanism or detecting a particular position.
A defective microswitch can cause malfunctions or prevent certain functions of the saw from operating.
We offer the microswitch reference 3901204043, compatible with selected Scheppach, Woodster, Dexter, Kity and Parkside mitre saws.
Always check the reference number and electrical specifications before replacing this component.
Safety devices must never be removed or bypassed to restore machine operation.
The gear for a Parkside mitre saw is a mechanical component used in certain transmission or adjustment mechanisms.
Over time, a gear may become worn, develop damaged teeth or stop functioning correctly.
Our catalogue includes a gear compatible with the Parkside PZKS 2000 B2 and selected Scheppach HM216SPX and HM216X mitre saws.
This component corresponds to position 76 on the relevant exploded diagrams and has an approximate diameter of 42.7 mm, a thickness of 10 mm and an overall thickness of 17 mm including its reinforced section.
Before ordering a replacement gear, check its reference, dimensions and position on the exploded diagram of your machine.
The cutting fence of a mitre saw helps position wooden workpieces correctly and provides stable support during cutting.
A bent, cracked or incorrectly secured fence can cause positioning errors and reduce cutting accuracy.
Our catalogue includes the cutting fence reference 5901202001, designed for certain Scheppach HM100LXU and MSS10 mitre saws. It may also replace reference 3901207012 on the relevant machines.
As with all replacement components, compatibility with a Parkside mitre saw must not be assumed. It must be confirmed using the information provided on the product page.
The depth stop for a mitre saw allows the downward movement of the cutting head to be limited on machines equipped with this feature.
It can be used for certain operations requiring controlled cutting depth, within the limits specified by the manufacturer.
A damaged depth stop or a defective adjustment mechanism may prevent the cutting depth from being set correctly.
We offer the depth stop reference 3901227019, suitable for selected Scheppach, Woodstar and Parkside mitre saws.
Always check the list of compatible machines before ordering this component.
To find the correct replacement part for a Parkside mitre saw, it is essential to identify your machine accurately.
We recommend checking the following information:
Two Parkside mitre saws may look similar while using different components.
A part compatible with one model is therefore not necessarily suitable for another version of the machine.
To avoid ordering the wrong component, carefully check the compatibility information provided on each product page.
Some Parkside mitre saws share components with machines sold under the Scheppach, Woodster, Woodstar, Kity or Dexter brands.
This may be explained by similar designs or the use of common components across certain machine ranges.
As a result, the same spare part reference may sometimes be used on several mitre saws marketed under different brands.
However, a similar external appearance does not guarantee that motors, blade guards, flanges or electrical components are identical.
Compatibility must always be verified using the relevant part references and technical information.
Our selection includes components for Parkside machines where compatibility with certain Scheppach-related models has been identified.
Regular maintenance helps prevent premature wear and keeps your machine in good working condition.
After each use, it is advisable to remove sawdust accumulated around the table, cutting fence and accessible mechanisms.
The following components should also be checked regularly:
Before carrying out any maintenance or repair, always unplug the machine and wait until the blade has completely stopped.
In the event of an electrical fault or a defective safety device, the machine should be inspected by a suitably qualified person.
A mitre saw that no longer operates correctly does not necessarily need to be replaced.
Replacing a motor carbon brush, blade flange, switch or mechanical component may restore the machine to working condition when the fault has been correctly identified.
Repairing the saw can be a cost-effective solution when the defective component is available and the replacement can be carried out safely.
It can also help extend the service life of the equipment and reduce waste associated with the premature replacement of electrical tools.
Probois Machinoutils specialises in woodworking machinery, accessories and replacement parts for a wide range of brands.
We offer a selection of spare parts for Parkside mitre saws to help you maintain and repair your equipment.
Explore this category to find motor carbon brushes, brush holders, inner and outer blade flanges, blade guards, electric motors, microswitches, gears and other mechanical components.
Whether you are looking for a Parkside mitre saw spare part or a component compatible with selected Scheppach, Woodster, Woodstar, Kity or Dexter machines, browse the available references and check their compatibility with your saw.
With the correct replacement parts, you can carry out the necessary repairs and extend the service life of your Parkside mitre saw.