Ignition coil for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Ignition coil CNW34F-LE or CNW1E32F for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Ignition coil CNW34F-LE or CNW1E32F for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Stater for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Carburetor for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Gear shaft for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Launcher reference 5910401003 for Scheppach and Woodster hedge trimmers
Launcher reference 5910703005 for Scheppach and Woodster blower and hedge trimmer
Clutch for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Fuel cap for various Scheppach and Woodster garden machines as well as Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)
Air filter for garden tool 4 in 1 and brush cutter Scheppach and Woodster
Spark plug for L8RTC / SW19 garden tools including Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)
Carburetor primer pump for Scheppach and Woodster 4 in 1 garden tools and brushcutters as well as Parkside PBK4B3 manufactured by Scheppach only (not compatible with Grizzly)
Blade for hedge trimmer Scheppach HTH250/240P and Woodstar HTW25/24P
Tank for Scheppach HTH250/240P and Woodstar HTW25/24P hedge trimmers (2 fixing points)
Reservoir for Scheppach HTH250/240P and Woodstar HTW25/24P hedge trimmers
Exhaust gasket for Scheppach HTH250/240P and Woodstar HTW25/24P hedge trimmer (before 02/2020)
Exhaust gasket for Scheppach HTH250/240P and Woodstar HTW25/24P hedge trimmer (from 03/2020)
Inlet intake for Scheppach and Woodster blower and hedge trimmer
Carburetor gasket reference 3910401006 for Scheppach and Woodster garden blower and hedge trimmer
Starter block for Hedge Trimmer Scheppach and Woodster
Has your Scheppach HTH250/240P or Woodstar HTW25/24P hedge trimmer been with you for several seasons and started to show a few signs of wear? Difficult starting, a damaged blade, a carburetor that needs replacing or a faulty engine component does not necessarily mean it is time to replace the whole machine.
In this category, we have brought together our spare parts for Scheppach HTH250/240P and Woodstar HTW25/24P hedge trimmers to help you maintain and repair your equipment. These petrol hedge trimmers were widely sold, and when the machine as a whole is still working properly, it would be a shame to put it aside simply because one component has worn out.
At Probois Machinoutils, we know that finding the right spare part for a machine that is already a few years old is not always straightforward. That is precisely why keeping spare parts available for older models matters: whenever the required part is still available, you have the opportunity to repair a hedge trimmer you already know and keep using it instead of unnecessarily replacing the entire machine.
The HTH250/240P and HTW25/24P contain a number of mechanical and engine components that can wear over time. Depending on the reference and availability, we offer a selection of parts suitable for these models.
You may find parts such as:
Ignition coil
Complete air filter assembly
Carburetor
Gear shaft
Recoil starter
Clutch
Fuel tank cap
Air filter
Spark plug
Primer bulb
Hedge trimmer blade
Fuel tank
Exhaust gaskets
Intake manifold
Carburetor gasket
Choke-related components
This selection covers both routine maintenance and certain starting, fuel supply, transmission and cutting-system repairs.
The blade is naturally one of the hardest-working parts of a hedge trimmer. Over the seasons, it can wear, become damaged by branches that are too thick or suffer an impact against a hard object hidden in the hedge.
A damaged Scheppach HTH250/240P or Woodstar HTW25/24P hedge trimmer blade can make the job less pleasant and produce a less precise cut. If the blade is badly damaged, replacing it can restore the cutting system without having to replace the entire hedge trimmer.
Before carrying out any work on the blade, the engine must of course be completely stopped and the machine secured in accordance with the manufacturer's safety instructions.
On a petrol hedge trimmer that has already been used for several years, starting problems can have several possible causes. The carburetor, primer bulb, gaskets, intake and fuel system are among the components worth checking.
A carburetor for the Scheppach HTH250/240P or Woodstar HTW25/24P may be required when the original carburetor has become defective or can no longer be restored to proper working condition. The primer bulb, which is used frequently when starting the engine, can also harden, crack or become less effective over time.
It is nevertheless preferable to identify the actual cause of the fault before ordering. Replacing parts at random is rarely the best approach, particularly when a starting problem can originate from several different components.
Several relatively simple components play an essential role in keeping the engine running correctly. The air filter allows the engine to breathe while helping to prevent dust and debris from entering. A spark plug in good condition contributes to reliable starting, while the ignition coil is directly involved in producing the spark required for the engine to run.
These are therefore useful components to inspect when a hedge trimmer becomes difficult to start, runs irregularly or has not been serviced for some time.
Regular maintenance of these smaller parts is often much simpler and less expensive than waiting for a more serious problem to leave the machine completely out of service.
The recoil starter is used every time the engine is started, so its mechanism can eventually wear or become damaged. The clutch and gear shaft, meanwhile, are essential for transmitting power from the engine to the cutting system.
If the engine runs but the blades are no longer driven correctly, different transmission components may need to be checked before deciding which part actually needs replacing.
For some references, a position number is shown on the product page. Compare it with the exploded diagram for your machine whenever possible. This small check can prevent an ordering mistake and save valuable time when fitting the replacement part.
This is particularly important for this category. Two hedge trimmers carrying the same commercial model name may have been fitted with different parts depending on their production date.
For example, some exhaust gaskets for the HTH250/240P and HTW25/24P differ depending on whether the machine was manufactured before February 2020 or from March 2020 onwards. There are also different versions of the fuel tank, including models with 2 or 3 fixing points.
Before ordering, take a few moments to check:
The exact model of your hedge trimmer
The machine reference and serial number
The manufacturing date, when available
The reference on the old part, if still readable
The number of fixing points when specified
The position number on the exploded diagram
The list of compatible machines shown on the product page
This check is particularly important for machines produced over several years, as some components may have changed during the production run.
A well-maintained petrol hedge trimmer can remain a reliable garden companion for many years. After use, removing plant residue from around the blade and regularly checking the overall condition of the machine can already help prevent many problems.
The air filter, spark plug, cutting system and starting components also deserve periodic inspection. If you notice an unusual noise, abnormal vibration or a sudden change in operation, it is better to investigate the cause before continuing to use the machine.
Very often, replacing a small worn part at the right time can prevent a much larger repair a few weeks or months later.
When you have owned a hedge trimmer for several years, you know how it starts, how it feels and how it behaves during use. If it still does its job properly, there is not necessarily any reason to replace it because of one worn part.
That is why we continue to offer spare parts for Scheppach and Woodstar hedge trimmers, including models that have already been in service for several years. Blade, carburetor, recoil starter, clutch, air filter, ignition coil, fuel tank, gaskets or small engine components: our aim is to help you keep your equipment running for as long as repair remains possible.
Browse the available parts for the Scheppach HTH250/240P and Woodstar HTW25/24P in this category, and always check the exact compatibility before placing your order.