Key for radial miter saw and table Holzmann TK305
Carbon brush holder for Scheppach HM110T and Holzmann TK305
Inner flange for Holzmann TK305 table miter saw
Outer flange for table miter saw
Table insert for table miter saw
M8x18 left-hand thread screw for table miter saw
Discover our selection of spare parts for the Holzmann TK305 combination mitre and table saw, designed for the maintenance, repair and replacement of worn or damaged components on your woodworking machine.
The Holzmann TK305 combines the functions of a mitre saw and a table saw. This design allows you to carry out different woodworking cutting operations using a single machine, with the operating mode suited to the task.
Like any sawing machine, it contains mechanical and electrical components, as well as protective devices, that may need replacing over time.
A faulty motor armature, worn carbon brushes, a damaged carbon brush holder, a deteriorated blade flange or a broken table insert can affect its operation.
At Probois Machinoutils, we offer a range of replacement parts to help you restore your Holzmann TK305 to working order without necessarily replacing the entire machine.
Our category includes motor components, blade-mounting parts, protective elements, a dust collection accessory and a blade removal wrench.
Our aim is to help you identify the component you need and carry out an appropriate repair.
The Holzmann TK305 must not be confused with the KAP305JL or KAP305ECO sliding mitre saws.
These are different models, and their components are not automatically interchangeable.
This category includes the following parts:
Blade removal wrench.
Motor armature.
Pair of carbon brushes.
Carbon brush holder.
Inner blade flange.
Outer blade flange.
Table insert.
M8 × 18 left-hand thread fixing screw.
Blade guard.
Dust collection bag.
Some parts are also offered for other models, including the Scheppach HM110T. However, compatibility must be checked individually on each product page.
Before ordering, always compare the required part with the one fitted to your machine and consult the references provided in the technical documentation.
The motor armature for the Holzmann TK305 is an internal component of the electric motor.
Also known as the rotor, it forms the rotating part of the motor and contributes to converting electrical energy into mechanical movement.
When the armature is damaged, the motor may develop significant operating problems.
Possible symptoms include:
A motor that no longer starts.
Loss of power.
Irregular operation.
Abnormal sparking.
A smell of overheating.
Unusual noises.
However, these symptoms do not automatically indicate an armature failure.
The problem may also originate from the carbon brushes, brush holders, electrical supply or another motor component.
We therefore recommend carrying out an accurate diagnosis before ordering a replacement armature.
Replacing this component requires technical expertise and must be performed in accordance with the manufacturer's instructions.
The motor carbon brushes for the Holzmann TK305 are wear parts essential to the operation of its commutator motor.
They provide electrical contact with the armature's commutator.
Over time, the carbon brushes gradually wear down and become shorter.
When they become too short or damaged, they may cause poor electrical contact and interfere with motor operation.
Worn carbon brushes can cause starting difficulties, intermittent shutdowns or loss of power.
Our selection includes a pair of carbon brushes for the Scheppach HM110T and Holzmann TK305 combination mitre and table saws.
It is generally advisable to replace both carbon brushes at the same time when replacement is necessary.
Before installation, also check the condition of the commutator and carbon brush holders.
New carbon brushes will not necessarily solve the problem if the armature is damaged or another motor component is faulty.
Several signs may indicate that the motor carbon brushes need inspecting:
The motor is difficult to start.
The machine stops during operation.
The motor runs irregularly.
A loss of power occurs.
The carbon brushes show significant wear.
These symptoms may also have other causes.
It is therefore preferable to inspect all the relevant components before ordering.
Before working on the motor, always disconnect the machine from the mains and wait until the blade has come to a complete stop.
Electrical diagnosis and repairs must be carried out by someone with the necessary qualifications.
The carbon brush holder for the Holzmann TK305 holds the motor carbon brush in its intended position and contributes to its correct operation.
A damaged brush holder may prevent the carbon brush from moving correctly or compromise its contact with the commutator.
Replacement may be necessary if it is broken, deformed or otherwise damaged.
A faulty carbon brush holder can cause symptoms similar to those of worn carbon brushes.
It is therefore important to inspect both components.
Our category includes a carbon brush holder for the Scheppach HM110T and Holzmann TK305 saws, in accordance with the compatibility information provided on the product page.
Before ordering, check the brush holder's shape, specifications and correspondence with the original assembly.
When a Holzmann TK305 develops a motor problem, several components may be responsible.
Carbon brushes are wear parts whose condition can be inspected during diagnosis.
The carbon brush holder should also be examined to ensure that it is not broken or deformed and allows the brush to operate normally.
The armature, meanwhile, may have electrical or mechanical damage requiring a more extensive repair.
A motor that no longer starts does not necessarily mean that the complete armature needs replacing.
A systematic inspection helps determine which part actually requires replacement.
Other possible causes, including the electrical supply and control components, should also be checked by a qualified person.
This approach helps avoid purchasing several unnecessary parts when only one component is defective.
The inner blade flange for the Holzmann TK305 combination mitre and table saw forms part of the blade mounting system.
It contributes to the correct positioning and support of the blade on the machine's shaft.
Its condition should be checked when replacing the blade or following a mechanical incident.
An inner flange may need replacing if it shows:
Deformation.
Cracks.
A damaged contact surface.
Signs of abnormal wear.
A defect preventing correct blade installation.
It is essential to use a flange that corresponds exactly to the mounting arrangement specified by the manufacturer.
A part that merely looks similar does not guarantee correct blade attachment.
The outer blade flange completes the blade fixing system.
It works together with the inner flange and the fixing screw.
The two flanges occupy different positions and must not be confused.
A damaged outer flange may compromise correct blade clamping.
Before ordering, identify the exact part requiring replacement and verify its compatibility with the Holzmann TK305.
During reassembly, follow the manufacturer's instructions concerning the order of the components and blade installation.
A machine whose blade cannot be secured correctly must never be used.
Our category also includes an M8 × 18 left-hand thread screw for a combination mitre and table saw.
The distinguishing feature of this screw is its left-hand thread.
It must not be confused with a conventional M8 screw with a right-hand thread.
The thread direction is an essential specification: using an unsuitable screw may damage the assembly or prevent the relevant component from being secured correctly.
Before ordering, check the specifications of your original screw:
Thread diameter.
Length.
Thread direction.
Head shape.
Function and position on the machine.
Do not replace this screw with a standard model simply because its diameter appears identical.
Also follow the manufacturer's instructions during removal and reassembly.
The blade removal wrench for the Holzmann TK305 is an accessory designed for blade removal and replacement operations.
Using the correct tool allows you to work on the fixing components specified by the manufacturer without resorting to unsuitable equipment.
A lost or damaged wrench can make maintenance operations more difficult.
Using an unsuitable tool may also damage the fixing components.
Our category allows you to find a blade removal wrench intended for the Holzmann TK305.
Before working on the blade, disconnect the machine from the mains and wait until it has stopped completely.
Then follow the manufacturer's instructions regarding shaft locking, loosening direction and reassembly.
The table insert for the Holzmann TK305 is located around the blade opening.
It forms part of the machine's work surface.
Over time, this insert may develop cutting marks, cracks or breaks.
A damaged insert may no longer perform its intended function correctly and can affect the support of certain wooden workpieces.
Replacement may be necessary if it is:
Broken.
Cracked.
Deformed.
Damaged around its mounting points.
Excessively deteriorated around the blade opening.
Before ordering, check the insert's shape and compatibility with the TK305 model.
After replacement, make sure it is correctly positioned and does not come into abnormal contact with the blade.
The blade guard for a combination mitre and table saw forms part of the machine's safety devices.
It helps reduce the risk of accidental contact with the blade under the operating conditions specified by the manufacturer.
A broken, cracked or deformed guard, or one with damaged mounting points, may no longer perform its function correctly.
It is important to inspect its condition and operation regularly.
If the guard is damaged, it must be replaced with a part suitable for the machine.
The guard's shape and mounting system must correspond to the original assembly.
Never use your Holzmann TK305 with a missing, damaged or deliberately disabled blade guard.
Before purchasing, always check that compatibility with your machine is explicitly indicated on the product page.
The dust collection bag for the Holzmann TK305 combination mitre and table saw is designed to collect some of the sawdust produced during cutting operations.
It connects to the collection outlet provided on the machine.
A dust bag may need replacing if it is torn, punctured or damaged around its attachment system.
A damaged bag may allow more sawdust to escape and become less effective.
It is important to inspect its condition regularly and empty it according to the manufacturer's recommendations.
For more effective dust collection, a suitable extraction system may be necessary, depending on the machine and the work being carried out.
The original dust bag should not be considered sufficient protection against exposure to wood dust.
A dust collection bag in poor condition may cause several problems.
It may allow sawdust to escape into the working environment or no longer remain securely attached to its connection.
A heavily clogged bag may also become less effective.
Replacing it restores an accessory in good condition, provided that the machine's collection system is functioning normally.
Before ordering, make sure the bag offered is suitable for your Holzmann TK305.
If your Holzmann TK305 combination mitre and table saw refuses to start, several causes are possible.
The problem may originate from the electrical supply, a control component, the motor carbon brushes, a brush holder or the armature.
You should therefore not immediately conclude that the entire motor has failed.
Inspecting the carbon brushes and brush holders may form part of the diagnosis.
If these components are in good condition, further checks may be necessary to identify the cause of the fault.
Electrical work must be performed by a qualified person.
An accurate diagnosis allows you to order the correct component and avoid unnecessarily replacing parts that are still functional.
Poor cutting quality does not necessarily mean that a machine component is defective.
Several elements should be examined, including the blade's condition, its installation, the machine's settings and the supporting surfaces.
A blunt blade or one unsuitable for the material may produce irregular cuts.
A damaged table insert may also affect the support of certain workpieces.
If the blade has recently been removed, it is important to check the installation of the flanges and fixing screw in accordance with the manufacturer's instructions.
If abnormal vibrations occur, stop the machine immediately and identify their cause before using it again.
Do not replace a flange or another component without first identifying the actual defect.
Before ordering a replacement part, identify your machine precisely.
We recommend recording the following information:
Brand: Holzmann.
Exact model: TK305.
Serial number.
Manufacturing month and year.
Supply voltage.
Original part reference, if known.
Position number in the exploded diagram, where available.
Spare parts for the Holzmann TK305 must not automatically be assumed to be compatible with those for other Holzmann mitre saws.
Some parts may also be shared by several brands or models, but this compatibility must be confirmed individually.
IMPORTANT: BEFORE PURCHASING, you must check that your machine appears in the LIST OF COMPATIBLE MACHINES provided on the relevant spare part product page. Where necessary, also check your machine's manufacturing month, manufacturing year and serial number.
A visual resemblance alone does not guarantee that a component is compatible.
Regular maintenance helps preserve your machine's operation and detect early signs of wear.
Before carrying out any work, disconnect the saw from the mains and wait until the blade has stopped completely.
Inspect the condition of the protective devices regularly.
Also check the supporting surfaces, table insert and blade fixing components.
Inspect the dust collection bag and make sure it is correctly installed.
If the motor becomes difficult to start, it may be necessary to inspect the carbon brushes.
Regular cleaning also helps limit sawdust accumulation in accessible areas, provided the manufacturer's instructions are followed.
Any fault that could compromise safety must be corrected before the machine is returned to service.
A fault affecting a single component does not necessarily require purchasing a new machine.
Replacing a pair of carbon brushes, a brush holder, an armature, a table insert or a fixing component may restore your saw to working order when the repair is technically appropriate.
Our selection of spare parts for the Holzmann TK305 allows you to search directly for the component corresponding to your needs.
However, carrying out a diagnosis before ordering remains essential.
A starting problem is not necessarily related to the armature.
Poor cutting quality is not necessarily caused by a blade flange.
A dust collection problem may originate from the bag, but it may also involve another part of the collection system.
Identifying the precise cause of the malfunction helps avoid unnecessary purchases and select the appropriate repair.
At Probois Machinoutils, we offer a selection of replacement parts to maintain and repair your Holzmann TK305 combination mitre and table saw.
Discover the following parts in this category:
Blade removal wrench.
Motor armature.
Pair of carbon brushes.
Carbon brush holder.
Inner blade flange.
Outer blade flange.
Table insert.
M8 × 18 left-hand thread screw.
Blade guard.
Dust collection bag.
Looking for another spare part for your Holzmann TK305?
Send us the exact model, serial number, manufacturing date and, if possible, the part's position number in the exploded diagram to help us identify it.
Probois Machinoutils: your specialist in Holzmann woodworking machine spare parts, helping you maintain, repair and extend the service life of your TK305 combination mitre and table saw.
