Filter By

Price

Price

  • €0.00 - €119.00

Availability

Availability

Special Products

Special Products

Metal lathe with 3-axis digital display ES-12 V Bernardo Master 165 Pro - 400V

Metal lathe with 3-axis...

€4,997.80 €5,997.80
Metal Lathe Bernardo Master 165 Pro - 400V

Metal Lathe Bernardo Master...

€4,797.80 €5,597.80
Metal lathe and milling machine Bernardo Proficenter 880 G Vario

Metal lathe and milling...

€4,697.80 €5,697.80
All Products

Spare parts for Woodstar 4-in-1 garden multi-tool

Spare parts for Woodstar 4-in-1 garden multi-tool - Probois

Active filters

Has your Woodstar or Woodster 4-in-1 garden multi-tool been helping you for years with brush cutting, grass trimming, hedge trimming and pruning branches? With this type of multi-function machine, you quickly get used to keeping the same engine unit and simply changing the attachment depending on the job. So when a recoil starter breaks, a carburettor becomes clogged, an ignition coil starts to fail or a component on one of the attachments wears out, it would be a shame to replace the entire machine when a targeted repair may be all that is needed.

This category brings together a wide range of spare parts for Woodstar and Woodster 4-in-1 garden multi-tools. These petrol-powered machines combine several functions around a single engine: brush cutter, grass trimmer, hedge trimmer and pole pruner. Depending on the model and year of manufacture, many parts may also be shared with certain Scheppach multi-tools, as Woodstar and Woodster machines were marketed within the same manufacturing environment.

You can therefore find engine parts as well as transmission components and parts for the various attachments: carburettors, recoil starters, ignition coils, air filters, fuel tanks, primer bulbs, clutches, drive shafts and flexible drive shafts, handles, couplings, blades, trimmer spools, chainsaw chains, chain tensioners, hedge trimmer parts and pole pruner parts.

Repair rather than replace your Woodstar multi-tool

A 4-in-1 garden multi-tool is particularly practical because a single engine can be used for several different jobs. This is also what makes repairing it worthwhile: when just one part is faulty, the rest of the machine and its various attachments may still be perfectly usable.

An engine that is difficult to start may simply need a new filter, primer bulb, spark plug, carburettor or ignition component. If an attachment is no longer being driven, the clutch, drive shaft or flexible drive shaft may need to be checked. If only one function has stopped working, such as the hedge trimmer or pole pruner, the problem may be located directly within that attachment.

Before replacing several parts at random, it is therefore better to look carefully at the symptoms: does the engine start? Does it idle correctly? Does the drive shaft turn? Does the problem affect every attachment or only one? This method often makes it easier to identify the area that needs checking and helps avoid unnecessary expense.

Engine parts for Woodstar and Woodster 4-in-1 garden multi-tools

The petrol engine is naturally one of the main assemblies on these machines. Depending on the model, Woodstar, Woodster and certain Scheppach multi-tools may use parts designed for engines of approximately 32.6 cc or 51.7 cc.

Maintenance and repair parts can include air filters, carburettors, carburettor and intake gaskets, ignition coils, spark plugs, primer bulbs, fuel lines, fuel tanks, recoil starters, pistons, exhaust components and engine covers.

When the engine becomes difficult to start, stalls under acceleration, lacks power or runs unevenly, there can be several possible causes. A clogged filter, faulty fuel supply or ignition problem can produce similar symptoms. It is therefore important to check the machine methodically before deciding which part needs replacing.

Recoil starter, carburettor and ignition: common problems over time

The recoil starter is used every time the engine is started. Its cord, return spring or internal mechanism can eventually wear out. If the cord no longer retracts, becomes jammed or the starter no longer turns the engine correctly, replacing it may restore normal starting operation.

The carburettor controls the air-fuel mixture. After a long period of storage or several seasons of use, deposits can interfere with its operation. If the engine is difficult to start, will not idle properly or bogs down under acceleration, the carburettor and the complete fuel system should be checked.

The ignition coil and spark plug produce the spark required for the engine to run. If there is no ignition, these are among the components to check, along with the electrical connections and engine stop system.

Brush cutter and grass trimmer spare parts

The brush cutter is generally one of the most frequently used functions on a 4-in-1 multi-tool. It is directly exposed to tall grass, brush, small impacts and flying debris, so several components can eventually wear out or become damaged.

Depending on the machine version, you may find trimmer spools, brush cutter blades, guards, protective supports, fixing nuts and flanges, gear heads, drive shafts and coupling components.

If the cutting head no longer rotates correctly, this does not necessarily mean that the engine is at fault. The clutch, drive shaft, tube coupling or lower gear head may also be responsible. Checking the transmission step by step makes it easier to locate the fault accurately.

Hedge trimmer parts for your multi-tool

The hedge trimmer attachment uses the multi-tool's engine to maintain hedges and reach higher areas more easily. Over time, the blade, gears and internal transmission components can undergo normal wear.

Parts such as the hedge trimmer blade, gear, certain seals or the complete hedge trimmer attachment may be available depending on your machine version. If the engine runs but the blades no longer move or operate abnormally, it is worth checking the attachment drive before assuming there is a problem with the engine unit.

Pole pruner parts and chainsaw chains

The pole pruner function allows you to cut branches at height using a small guide bar and chainsaw chain fitted to the end of the shaft. The chain is a wear part that must remain correctly sharpened and tensioned for efficient cutting.

Depending on compatible machines, this category includes 10-inch chainsaw chains, chain tensioners, covers and pole pruner parts. A badly worn or incorrectly tensioned chain reduces cutting performance and can place unnecessary strain on the transmission.

Extension shafts may also be available to increase the reach of certain multi-tools. Once again, compatibility with your exact machine version should be checked carefully before purchase.

An older Woodstar multi-tool can still provide years of service

These 4-in-1 garden tools often become familiar machines in the garage: they come out in spring to tidy the edges, a few weeks later to trim the hedge, and then again to prune a branch that has become troublesome. Over the years, you get to know the sound of the engine, the way it starts and even which attachment you reach for most often.

When a small part eventually fails, replacing the whole machine also means giving up all the attachments that still work perfectly well. This is exactly why spare parts for Woodstar and Woodster 4-in-1 garden multi-tools are so useful. A recoil starter, filter, carburettor, clutch or transmission component may be all that is needed to extend the life of the complete machine for several more seasons.

Repairing a machine you already know is often more economical, but also more practical: there is no need to change your habits or replace attachments that are still in perfectly good working order.

Woodstar, Woodster, Scheppach and Parkside: check compatibility carefully

Many parts in this category were used on several Woodstar, Woodster and Scheppach garden multi-tools. Some references may also fit Parkside machines manufactured by Scheppach, including certain PBK4B3 versions. However, this does not mean that all machines with similar model names use the same components.

Differences can exist depending on engine capacity, year of manufacture, attachment type and machine generation. For example, parts intended for a Parkside version manufactured by Scheppach may be incompatible with a version produced by another manufacturer.

Before ordering, carefully check the exact model of your garden multi-tool, the part reference, its position on the exploded diagram where available and, if necessary, the month and year of manufacture or the machine's serial number.

This check is particularly important for carburettors, ignition coils, fuel tanks, recoil starters, drive shafts and complete attachments, as parts that look very similar can have different dimensions or mounting systems.

Extend the life of your Woodstar 4-in-1 garden multi-tool

With the right spare parts for your Woodstar or Woodster garden multi-tool, an older machine can continue to handle many maintenance jobs around the garden. The very principle of a 4-in-1 machine is worth preserving: one engine with several useful attachments, rather than replacing the complete set because of one faulty component.

Whether the problem concerns starting, fuel supply, ignition, transmission or a worn attachment, the aim remains the same: identify the fault, select the correct reference and replace only what genuinely needs replacing. A well-targeted repair can put your Woodstar or Woodster multi-tool back to work for brush cutting, grass trimming, hedge trimming and pruning for many more seasons.