Spare parts for Leman wood lathe

This category is dedicated to spare parts for Leman wood lathes and covers maintenance and repair solutions for the models represented in our catalogue, including the Leman TAB040, TAB050, TAB085 and TAB110. These machines do not all share the same design. A benchtop mini lathe, a variable-speed lathe and a larger wood lathe may use different components, so the exact model must always be identified before ordering.

Our range changes with production and supplier availability. Parts may be added or withdrawn over time. This description is therefore not a fixed inventory: it explains the main assemblies of a wood lathe and helps you identify the correct replacement part.

Headstock, spindle and drive system

The headstock contains the spindle that drives the workpiece. Depending on the model, motor power is transmitted by belts and pulleys, with a speed-selection or variable-speed system specific to the machine. A worn or loose belt may slip, reduce drive or create unusual noise. Play in the spindle or bearings can cause vibration and loss of turning accuracy.

Before replacing a drive component, inspect the belt, pulleys and surrounding mechanism. Repeated belt wear may indicate poor alignment or incorrect tension. If spindle play is present, locate its source before ordering: the symptom alone does not always identify the failed component.

Tailstock, live centre and locking mechanisms

The tailstock slides along the lathe bed and is commonly used to support work between centres. Its quill accepts the centre or a compatible accessory and must move smoothly before being locked securely. Handwheels, screws, levers and clamping mechanisms all contribute to these adjustments.

If the tailstock becomes difficult to move, no longer locks correctly or develops excessive play, inspect it before replacing parts. Clean the contact surfaces, check the clamping system and look for visible wear or damage. A centre that runs roughly or has excessive play can also affect finish quality and generate vibration.

Tool rest, banjo and bed locking

The tool rest supports the turning tool and is essential for controlled, accurate work. It is mounted on an adjustable tool-rest base or banjo that moves along the bed. The assembly must adjust easily while locking firmly during use. Tool-rest stem diameter and clamping geometry can differ between models.

If the tool rest drops, twists or moves despite being tightened, inspect the lever, locking mechanism and contact surfaces. Do not compensate for a faulty clamp by overtightening the handle, as this can damage threads or locking components. A badly damaged tool rest should also be checked to maintain smooth support for the turning tool.

Variable speed, motor and electrical components

Some Leman lathes use a variable-speed drive or model-specific electronic components. Depending on model and production period, the motor, speed controller, carbon brushes, switch and other electrical parts can differ. A lathe that fails to start, runs at unstable speed or loses drive therefore needs diagnosis before parts are ordered.

Start by checking the power supply, cables and accessible connections. A blunt turning tool, an unsuitable speed or an excessively aggressive cut can place unnecessary load on the motor. Internal electrical tests must always be carried out with the machine disconnected and, where appropriate, by a competent person.

Use the exploded diagram to identify the correct part

Read the exact designation on the machine rating plate, then consult the manual and, where available, the exploded parts diagram. The item number locates the component precisely within the assembly and is much more reliable than an approximate description.

Keep the original part until the replacement arrives whenever possible. Compare dimensions, shaft diameter, thread, connectors, shape and mounting points. If you need our help, clear photographs of the rating plate, the complete area concerned and the removed component are particularly useful.

IMPORTANT: check compatibility before purchase

IMPORTANT: BEFORE PURCHASING, carefully check the list of compatible machines shown on each product page.

For some spare parts, the machine model alone is not sufficient to guarantee compatibility. Manufacturers may introduce changes during production, meaning that machines sold under the same model name can use different components.

If you are unsure, send us the exact model, month and year of manufacture, and serial number of your machine before ordering.

Maintain your Leman wood lathe for accuracy and reliability

Regular maintenance helps extend service life. Remove chips and dust from the bed and mechanisms, inspect the drive periodically and keep sliding surfaces clean. Check adjustable locking devices and the condition of accessories before use. New vibration, unusual noise, play or difficult adjustment should be investigated before the problem becomes more serious.

Probois Machinoutils – SEO tours à bois Leman Page 5

A properly sharpened turning tool cuts rather than forcing the workpiece and motor. Select a suitable spindle speed for the diameter, shape and balance of the workpiece. After a repair, perform a short no-load test at moderate speed and watch for abnormal noise, vibration or movement before resuming turning.

Repair your Leman wood lathe with Probois Machinoutils

Probois Machinoutils develops an evolving selection of replacement parts for Leman TAB040, TAB050, TAB085 and TAB110 wood lathes. If the part you need is not displayed, send us the rating-plate information, exploded-diagram item number when known and photographs of the component or affected area.

Repairing a lathe whose bed, structure and main assemblies remain in good condition can extend its useful life considerably. Correct fault diagnosis and compatibility checks prevent unnecessary orders and help you keep a machine you already know. Our aim is to help you maintain and return your Leman wood lathe to service rather than replace the complete machine unnecessarily.