Drive roller (N°33 M081209 on the exploded view) of the Holzmann K5-260L combine planer
Rod operating the flywheel of the circular saw Holzmann K5-260, Bernardo CWM250 and Bernardo FK200R
Turning pole for the circular saw on Holzmann K5-260, Bernardo CWM250 or FK200R
M8x10 MM blade locking screw with hexagon head and 12 mm wrench for Holzmann and Bernardo thicknesser, planer and woodworking combination
704 mm Chain for Holzmann and Bernardo Jointed Planer and Combination Wood as listed below
608 mm chain for Holzmann and Bernardo planer and jointer as listed below
Trapezoidal belt for jointer, planer and woodworking combination according to the list below
Spindle moulder protective cover complete with cheeks and presser
Lever 10006866 for Holzmann K5260LL mortiser
Complete rip fence for circular saw compatible with Scheppach Bestcombi, Kity Bestcombi, and Holzmann K5260L combination woodworking machines. Supplied complete with the aluminium fence, locking mechanism, clamping handles, end stop and all mounting hardware (parts 1 to 13). Ideal for restoring accurate fence guidance and achieving precise, repeatable rip cuts. Please check your machine's compatibility before ordering.
Holzmann combination woodworking machines combine several essential woodworking operations in a single machine. Depending on the model, they can include surface planing, thicknessing, sawing, spindle moulding and mortising functions.
These versatile machines are particularly suitable for workshops where several woodworking operations are required while keeping the overall footprint to a minimum. Holzmann 5-function combination machines therefore provide several woodworking stations within a single machine.
With regular use, certain mechanical, electrical and transmission components may wear out or become damaged. This category contains spare parts for Holzmann combination woodworking machines, allowing you to maintain and repair various models from the Holzmann range.
The Holzmann range includes various 5-function combination woodworking machines, particularly several generations from the K5 series.
Depending on the year of manufacture, models include the K5 260L, K5 260VF, K5 260PSMW2, K5 260SMART, K5 310VPSMW2, K5 315VF and K5 320VFP, as well as different versions depending on voltage and equipment.
These machines can combine several functions:
surface planing;
thicknessing;
circular sawing;
spindle moulding;
mortising, depending on the model and equipment.
However, specifications and components can vary considerably between models and production generations.
The surface planer function is used to create a flat face and a straight, square edge before carrying out further woodworking operations.
This section of the machine contains various replaceable components, including planer knives, cutterblock, bearings, tables, planer fence, adjustment components, guards and fixing parts.
Incorrectly adjusted tables, worn planer knives or damaged adjustment components can directly affect planing quality.
It is therefore important to accurately identify the cause of the problem before replacing a component.
The thicknesser function allows a workpiece to be machined to a consistent thickness after surface planing.
The system uses the cutterblock together with feed rollers, gears, chains, belts, bearings and table height adjustment mechanisms.
If the timber no longer feeds correctly, moves intermittently or comes out with inconsistent thickness, several components may be responsible.
The condition of the feed rollers, transmission system and adjustment mechanisms should therefore be checked before ordering a replacement part.
The planer knives are essential wear parts that directly influence machining quality.
Blunt knives can cause poor surface finish, torn grain, increased cutting resistance or irregular results.
Depending on the Holzmann combination machine, the dimensions, number and mounting system of the knives may vary.
It is therefore essential to check the exact machine model and knife dimensions before ordering.
The circular saw section is used for ripping, cross-cutting and, depending on the machine equipment, panel cutting with the sliding table.
This section includes components such as the saw blade, saw spindle, bearings, belts, pulleys, blade height and tilt mechanisms, fences and sliding table components.
Excessive play, vibration or difficulty adjusting blade height or angle may require inspection of these different components.
A worn or damaged saw blade can also cause vibration and poor cutting quality without there necessarily being a fault with the machine itself.
Depending on the model, a Holzmann combination woodworking machine may be fitted with a sliding table for accurately guiding panels and timber during sawing operations.
The sliding table includes various components such as profiles, guide rollers, bearings, stops, handles, fences, locking mechanisms and fixing parts.
Over time, play may develop or individual components may become worn.
A correctly adjusted sliding table is essential for maintaining accurate cuts.
The spindle moulder function is designed for profiling, grooving, rebating and moulding wood using suitable tooling.
Depending on the model, the spindle moulder may offer several spindle speeds and height adjustment.
Replaceable components can include belts, pulleys, bearings, spindle shafts, adjustment mechanisms, guards, fences and transmission parts.
Before carrying out any work on this section of the machine, always disconnect the machine from the power supply.
Certain Holzmann combination machines can be equipped with a mortising unit for producing mortises.
Depending on the model, the mortiser may be integrated, supplied with the machine or available as an optional accessory.
The system can include a table, movement mechanisms, operating levers, stops, clamping systems and various mechanical components.
Wear or excessive play in these parts can reduce mortising accuracy.
Drive belts transmit power from the motors to the different working units of the machine.
Depending on the design of the combination machine, several belts may be used to drive the saw, spindle moulder, planer-thicknesser cutterblock or other mechanisms.
A worn belt may become loose, cracked or begin to slip.
Symptoms can include loss of power, unusual noise or a machine function that no longer reaches its correct operating speed.
Belt dimensions and profiles must always correspond to the specifications of the machine concerned.
Chains and gears are used particularly in certain thicknesser feed systems.
They transmit movement to the feed rollers that move the timber through the thicknesser.
Over time, a chain can stretch and gear teeth can become worn.
Irregular feeding, knocking noises or a feed roller that no longer rotates correctly may therefore require inspection of the complete transmission system.
It is preferable to check all transmission components before assuming that the motor needs to be replaced.
Bearings are used throughout the combination machine, including the cutterblock, saw spindle, spindle moulder, feed rollers and other rotating shafts.
A worn bearing can cause noise, excessive play, vibration or irregular rotation.
When a bearing is found to be defective, the shaft, bearing housing and associated components should also be inspected to determine whether additional parts have been damaged.
Holzmann combination woodworking machines use various switches, contactors, safety devices and electrical components to control the different machine functions.
A machine that no longer starts does not necessarily have a faulty motor.
Depending on the model, the problem may come from a switch, guard safety switch, emergency stop, contactor, electrical connection or another component in the control circuit.
A proper diagnosis should therefore be carried out before replacing an electrical component.
Depending on their design, Holzmann combination machines may use several independent motors to operate the different functions.
For example, certain K5 models use separate motors to drive the main working units of the machine.
If only one function stops working while the others continue to operate normally, this can help identify the relevant motor or electrical circuit.
However, a motor should only be replaced after checking the power supply, safety devices, transmission and control components.
Several Holzmann combination woodworking machines are available in 230 V and 400 V versions.
This difference is particularly important when ordering electrical spare parts.
Certain mechanical components may be identical between the two versions, while motors, switches, contactors and other electrical components may differ.
Before ordering any electrical spare part, always check the voltage shown on the machine identification plate.
If your Holzmann combination woodworking machine no longer starts, several causes are possible.
Check the following:
electrical power supply;
emergency stop;
switches;
safety devices;
guards and safety switches;
contactors;
wiring and electrical connections;
motors.
On a multifunction machine, it is also important to determine whether the entire machine has stopped working or only one particular function.
This distinction can help identify the cause of the problem more quickly.
If the thicknesser feed rollers no longer move the workpiece correctly, the motor is not necessarily responsible.
The problem may be caused by a chain, gear, drive belt, feed roller, shaft or another transmission component.
A significant build-up of resin, dust or wood chips may also interfere with certain mechanisms.
It is therefore advisable to inspect the complete feed and transmission system before ordering replacement parts.
The exploded diagram for your Holzmann combination woodworking machine is the best way to accurately identify the required spare part.
Individual components are generally assigned item numbers, making it easier to identify the correct replacement part.
This is particularly important with combination woodworking machines because models with similar names may have undergone several technical changes during their production life.
The item number should therefore always be compared with the compatibility information shown on the spare part product page.
The designation K5 refers to a family of Holzmann combination woodworking machines and is not necessarily sufficient to accurately identify your machine.
There are several models, generations, voltage versions and configurations.
Two components from different K5 machines may look identical while having different dimensions, mounting systems or technical specifications.
To avoid ordering the wrong part, always check the complete machine model, supply voltage and, where required, manufacturing date or serial number.
IMPORTANT: BEFORE PURCHASING, always check the list of compatible machines shown on the product page and, where required, the month and year of manufacture or the serial number of your machine.
Regular maintenance helps preserve the accuracy, performance and service life of a combination woodworking machine.
Regularly remove accumulated wood chips and dust, inspect belts and transmission components, monitor the condition of planer knives and the saw blade, and keep the machine tables clean.
Adjustment mechanisms, fences, sliding tables and safety systems should also be inspected periodically.
Efficient dust extraction is particularly important on a combination machine, as the different woodworking functions can generate considerable quantities of wood chips and dust.
Before carrying out any cleaning, adjustment, maintenance or repair work, always disconnect the Holzmann combination woodworking machine from the power supply.
A worn belt, damaged gear, noisy bearing, faulty switch or feed problem does not necessarily mean that the complete machine needs to be replaced.
Our selection of spare parts for Holzmann combination woodworking machines allows many mechanical and electrical components to be replaced individually, helping extend the service life of your equipment.
Before ordering, accurately identify the model of your combination machine, the function concerned, the item number of the required part and, where necessary, the voltage, manufacturing date and serial number.
Choosing the correct spare part for your Holzmann combination woodworking machine allows you to repair your equipment efficiently and continue using its various woodworking functions.
