Discover our selection of spare parts for Holzmann spindle moulders, designed for the maintenance, repair and servicing of your woodworking machines. Whether you use your spindle moulder occasionally or regularly in a professional woodworking workshop, some mechanical and electrical components can wear over time and eventually require replacement.

Probois Machinoutils offers replacement parts for various Holzmann spindle moulders, including the FS160L, FS200, FS200S and FS200SF, depending on current spare part availability.

Drive belts, spindles, switches, motors, adjustment handwheels, fences, hold-down devices, guards and electrical components: replacing only the defective or worn part can considerably extend the service life of your machine.

Spare Parts for Holzmann FS160L, FS200, FS200S and FS200SF

Different Holzmann spindle moulders do not necessarily use the same components. Our spare parts catalogue is therefore organised by model to make it easier to identify and find the correct replacement part.

You can find spare parts for the Holzmann FS160L, FS200, FS200S and FS200SF, depending on the references currently available.

Depending on the model and its production generation, the spindle, transmission system, adjustment mechanisms, sliding table and electrical components may differ.

It is therefore important to search for a replacement part according to the exact model of your Holzmann spindle moulder, rather than relying only on the appearance of the original component.

Spindles and Tool-Holding Parts for Holzmann Spindle Moulders

The spindle is one of the most important components of a spindle moulder, as it supports and rotates the cutting tool.

Depending on the Holzmann model, various components may be associated with this assembly, including spindles, interchangeable spindles, clamping nuts, spindle rings, spacers, washers, clamping screws and other fixing components.

Some models may also allow the use of router bits with shanks through a specific interchangeable spindle or collet system.

It is therefore particularly important to identify the exact component required. An incorrect spindle or tool-clamping component should never be fitted, even if its dimensions appear similar to those of the original part.

Drive Belts for Holzmann Spindle Moulders

The drive belt on a Holzmann spindle moulder transfers power from the motor to the spindle on machines equipped with a belt transmission system.

Over time, a drive belt can stretch, crack, wear or eventually break. A worn or damaged belt can also cause slipping, vibrations or poor power transmission.

We offer various drive belts for Holzmann spindle moulders, including parts for the FS160L, FS200 and FS200S, depending on current availability.

Before ordering a replacement belt, always check its reference, profile and dimensions, as well as the list of compatible machines stated on the product page.

Switches and Electrical Parts for Holzmann Spindle Moulders

A Holzmann spindle moulder that no longer starts does not necessarily have a faulty motor. The problem may originate from various electrical components.

Depending on the model, the fault may involve the switch, emergency stop button, safety switch, capacitor on certain single-phase machines, wiring, contactor or motor.

Some versions may also use specific electrical components that must be correctly identified before ordering.

For spindle moulders available in both 230 V and 400 V versions, always check the voltage of your machine before selecting an electrical replacement part.

Fences, Hold-Down Devices and Guards for Holzmann Spindle Moulders

Working with a spindle moulder requires accurate workpiece guidance and correctly functioning protective equipment.

The spindle moulder fences, horizontal and vertical hold-down devices, guards, clamping systems and adjustment components can become worn or damaged during use.

Replacing a damaged fence, hold-down device or guard helps keep the machine properly equipped and ensures reliable workpiece guidance during different woodworking operations.

Handwheels, Handles and Adjustment Parts

Adjustment mechanisms are frequently used on a spindle moulder. Handwheels, handles, levers, shafts, screws and locking mechanisms can therefore develop excessive play, wear or become damaged over time.

These components are used to perform the different machine adjustments and must remain in good condition to maintain accurate machining.

On models equipped with a tilting spindle or other specific adjustment systems, it is particularly important to identify the required component using the exploded parts diagram corresponding exactly to your machine.

Sliding Table Parts for Holzmann Spindle Moulders

Some Holzmann spindle moulders are equipped with a sliding table or can accept additional equipment designed to improve workpiece guidance during moulding and tenoning operations.

These assemblies contain various components that may need replacing, including guide components, handles, clamping systems, stops, screws and other mechanical parts.

When looking for a replacement part for the sliding table, always use the exploded parts diagram corresponding precisely to your Holzmann spindle moulder model.

How to Find the Correct Spare Part for Your Holzmann Spindle Moulder

To correctly identify a Holzmann spindle moulder spare part, start by checking the exact model number shown on the machine identification plate.

Next, locate the required component on the exploded parts diagram and note its position number.

Where necessary, also check the exact machine model, 230 V or 400 V power supply, month and year of manufacture, serial number, position number on the exploded parts diagram and the dimensions or technical specifications of the original component.

Following this method considerably reduces the risk of ordering an incompatible replacement part.

IMPORTANT: Check Compatibility Before Ordering

IMPORTANT: BEFORE ORDERING, ALWAYS CHECK THE LIST OF COMPATIBLE MACHINES PROVIDED ON THE PRODUCT PAGE.

Some spare parts may have been modified during the production period of a Holzmann spindle moulder.

For certain components, compatibility may therefore depend on the month and year of manufacture or the serial number of the machine.

A replacement part that looks very similar to the one currently fitted to your spindle moulder is not necessarily identical. Visual similarity does not guarantee the same dimensions, mounting system or technical specifications.

Maintaining and Repairing a Holzmann Spindle Moulder

Regular maintenance helps preserve the accuracy, performance and correct operation of your Holzmann spindle moulder.

Periodically check the condition of the drive belts, spindle, tool-clamping systems, fences, hold-down devices, adjustment mechanisms and guards.

Wood dust and chips should also be removed regularly from around the mechanisms, transmission system and motor to prevent excessive accumulation.

A worn drive belt, bearing with excessive play, damaged handle or defective clamping mechanism should be replaced when necessary to prevent the problem from causing premature wear or damage to other components.

Probois Machinoutils – Holzmann Spindle Moulder Spare Parts

Probois Machinoutils offers a regularly expanding range of spare parts for Holzmann spindle moulders, intended for private users, woodworkers, cabinetmakers and professionals wishing to maintain or repair their machines.

Browse our dedicated subcategories for the Holzmann FS160L, FS200, FS200S and FS200SF to quickly find replacement parts corresponding to your machine.

Whether you are looking for a drive belt, spindle, switch, motor, fence, hold-down device, handwheel, handle or another mechanical or electrical spare part, always identify your exact machine model and the position number of the required component before ordering.