Spare parts for Holzmann BS115 metal bandsaw

Discover our selection of spare parts for the Holzmann BS115 metal bandsaw, designed for the maintenance, repair and restoration of your machine. Replacing a worn or damaged component can extend the service life of your bandsaw and help maintain accurate and consistent cutting performance.

The Holzmann BS115 is a metal bandsaw designed for cutting tubes, profiles and various metal workpieces. Its design allows horizontal cutting as well as vertical cutting using the appropriate table. The adjustable vice also allows straight and angled cuts.

Over time and with regular use, certain mechanical and electrical components may become worn. The drive belt, pulleys, bearings, blade guides, switch, vice components and saw arm lowering mechanism may therefore need to be inspected or replaced.

Which spare parts are available for the Holzmann BS115?

The Holzmann BS115 metal bandsaw consists of numerous components that can be replaced individually. Depending on availability, this category includes various BS115 spare parts required for the maintenance and repair of your machine.

Available spare parts may include:

• drive belts;
• pulleys and transmission components;
• bearings;
• blade guides and associated components;
• band wheels and blade guiding components;
• blade tensioning mechanism parts;
• springs and saw arm lowering components;
• vice components;
• crank handles and handles;
• switches and electrical components;
• automatic shut-off components;
• shafts, screws and fasteners;
• covers and safety guards;
• other mechanical components.

Our range of spare parts for the Holzmann BS115 metal bandsaw is regularly updated according to the availability of replacement components from the manufacturer.

Drive belt and transmission for Holzmann BS115

The transmission system of the Holzmann BS115 drives the bandsaw blade at the speed required for cutting metal. Different blade speeds can be selected by changing the position of the drive belt on the pulleys.

The Holzmann BS115 drive belt is a wear part and should be inspected periodically. A loose, cracked, deformed or damaged belt can cause slipping, loss of drive, vibration or irregular blade operation.

The pulleys and other transmission components should also be checked if unusual noises or drive problems occur. Incorrect alignment or excessive wear can accelerate belt deterioration and affect blade speed.

Blade guides and bearings for Holzmann BS115

Correct blade guidance plays an essential role in the cutting accuracy of the Holzmann BS115 metal bandsaw. The blade guides keep the bandsaw blade correctly positioned as it passes through the workpiece.

The bearings and other blade guide components are subjected to significant loads during cutting. With regular use, they may develop excessive play, become noisy or no longer guide the blade correctly.

Worn BS115 blade guides can contribute to irregular cuts, blade deviation or vibration. Their condition and adjustment should therefore be checked before automatically assuming that the bandsaw blade itself is responsible for poor cutting performance.

Blade tensioning and guidance on the BS115

Correct blade tension is essential for achieving consistent and accurate cuts. A blade that is not sufficiently tensioned may deviate during cutting, while excessive tension can place unnecessary stress on the blade, bearings and other mechanical components.

The blade tensioning mechanism consists of several parts that can become worn or damaged. The tensioning handle, shafts, screws and associated components should be inspected if the blade can no longer be tensioned correctly.

When replacing a Holzmann BS115 blade tensioning component, use the exploded diagram of the machine to accurately identify the required part.

Vice and clamping system for Holzmann BS115

The vice holds the metal workpiece securely during cutting. On the Holzmann BS115, the vice can be adjusted to allow straight and angled cuts.

The clamping screw, movable jaw, pivoting elements, crank handle and other clamping system components are regularly subjected to mechanical stress. Wear or damage to these parts can make it more difficult to hold the workpiece securely.

A correctly functioning metal bandsaw vice is essential to prevent the workpiece from moving during cutting and to maintain good cutting accuracy.

Spring and saw arm lowering mechanism

The Holzmann BS115 uses a mechanism that controls the lowering of the saw arm. This system helps regulate the pressure applied by the blade to the workpiece during cutting.

The spring and associated components may gradually wear or become damaged. If the saw arm lowers too quickly, moves irregularly or becomes difficult to control, the mechanism should be inspected.

Replacing a worn BS115 saw arm spring or lowering mechanism component can help restore smoother and more controlled operation of the saw arm.

Automatic shut-off parts for Holzmann BS115

The Holzmann BS115 features an automatic shut-off system at the end of the cut. When the saw arm reaches its lower position, the mechanism operates the control system to stop the machine.

The mechanical and electrical components involved in this system must remain correctly adjusted and in good condition. If the automatic shut-off system does not operate correctly, the relevant components should be inspected before the machine is returned to service.

Switches and electrical components for Holzmann BS115

The electrical system of the bandsaw includes various components required for controlling and operating the machine. A damaged switch or faulty electrical component may prevent the bandsaw from starting or cause abnormal operation.

Before ordering an electrical component for the Holzmann BS115, check the specifications of the original part as well as the information shown on the machine identification plate.

As the Holzmann BS115 has existed in different electrical configurations, it is particularly important to check the voltage of your machine before ordering a switch, motor or other electrical component.

Before carrying out any work on the electrical system, completely disconnect the machine from the power supply. Electrical repairs requiring specific expertise should be carried out by a suitably qualified person.

Maintaining your Holzmann BS115 metal bandsaw

Regular maintenance helps extend the service life of your bandsaw and reduce premature component wear. Metal chips should be regularly removed from around the blade guides, band wheels, vice and other moving components.

Periodically check the blade tension and condition, blade guides, bearings, drive belt, pulleys and clamping system. Any excessive play or unusual noise should be investigated before continuing to use the machine.

A blade that starts to wander does not necessarily mean that the blade itself is defective. Incorrectly adjusted blade guides, worn bearings, incorrect blade tension or inadequate workpiece clamping can also cause irregular or inaccurate cuts.

Regular inspection of the wear parts on the Holzmann BS115 can help identify a faulty component before it causes additional wear or damage to other parts of the machine.

Bandsaw blade for Holzmann BS115

The blade is naturally one of the main consumable parts of a metal bandsaw. The blade tooth pitch should be selected according to the material, shape and thickness of the workpiece being cut.

A worn or damaged blade, or a blade with an unsuitable tooth pitch, can result in slow, irregular or inaccurate cutting. Before replacing the blade, it is also advisable to check the blade guides and tension to ensure that the machine is correctly adjusted.

When purchasing a bandsaw blade for the Holzmann BS115, always check the required blade dimensions and select a tooth pitch suitable for your application.

How to identify the correct BS115 spare part

Before ordering a spare part for your Holzmann BS115 metal bandsaw, consult the exploded diagram and spare parts list corresponding to your machine to accurately identify the required component and its position number.

This check is particularly important for electrical components, transmission parts and blade guide components. Some part references may have changed depending on the production period of the machine.

IMPORTANT: BEFORE PURCHASING, always check the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Depending on the component, you may also need to check the month and year of manufacture and the serial number of your machine.

Can't find the BS115 spare part you need?

Not all spare parts for the Holzmann BS115 metal bandsaw are necessarily listed in our online catalogue. If you cannot find the component you need, consult the exploded diagram of your machine to identify its position number.

To help identify the correct spare part, provide the exact model of your bandsaw, its serial number, manufacturing date and the position number of the required component.

A photograph of the original component together with its main dimensions can also help with identification when a part number has changed or when several versions exist.

Repair your Holzmann BS115 and extend its service life

A worn drive belt, faulty bearing, damaged blade guide, vice component, switch or saw arm lowering component does not necessarily mean that the complete bandsaw needs to be replaced.

Many mechanical and electrical components can be replaced individually to repair your Holzmann BS115 metal bandsaw, restore correct operation and extend its service life.

Probois Machinoutils offers a constantly evolving range of spare parts for Holzmann metal bandsaws to help with the maintenance, repair and restoration of your machines.

Browse our Holzmann BS115 spare parts and use the exploded diagram together with the information shown on your machine to accurately identify the replacement part you need.

Reduce repetition and tighten the category textAdd the missing SEO metadata block