Spare parts for Parkside PSKO 24 A1 compressor

Spare parts for Parkside PSKO 24 A1 compressor - Probois Machinoutils

Active filters

Parkside PSKO 24 A1 Air Compressor Spare Parts: Repair and Maintain Your Machine

Are you looking for a spare part for your Parkside PSKO 24 A1 air compressor to repair your machine, replace a defective component or extend its service life? At Probois Machinoutils, we offer a selection of replacement parts for the maintenance and repair of your Parkside PSKO24A1 compressor.

An air compressor is a practical piece of equipment for many applications, including tyre inflation, blowing, cleaning certain surfaces and powering pneumatic tools compatible with its technical capabilities. To maintain reliable operation, it is important to regularly check the condition of its components.

Over time and with repeated use, some parts may become worn, damaged or defective. An air leak, an automatic starting problem, a damaged wheel or a faulty air pipe can make the compressor less efficient or more difficult to use.

This category includes a safety valve for Parkside compressors, a pressure switch, a transport wheel for the PSKO 24 A1 and a replacement air pipe.

These parts can help with various repairs, provided that their compatibility with your machine is confirmed and the cause of the malfunction has been correctly identified.

Parkside PSKO 24 A1 Compressor: Identify Your Exact Model

The Parkside PSKO 24 A1 belongs to the range of air compressors marketed under the Parkside brand. Before ordering a replacement part, it is essential to check the exact reference of your machine.

In particular, the PSKO 24 A1 must be distinguished from the PKO 24 A1, PKO 24 B2 and PKO 270 models. Despite the similarity of their names, these compressors may have different designs and require specific components.

Some parts are shared by several machines from the Parkside, Scheppach or Woodster brands. However, compatibility must always be confirmed using the manufacturer's references.

To correctly identify your compressor, check its identification plate. This generally provides the model designation and various technical details.

The IAN number and serial number may also help distinguish certain production versions.

If you have the operating manual or exploded parts diagram, locate the position number corresponding to the defective component. This method helps reduce the risk of ordering an incorrect spare part.

Safety Valve for Parkside PSKO 24 A1 Compressor

The compressor safety valve is an essential component of the compressed air system. It helps protect the system against excessive pressure in accordance with the manufacturer's specifications.

An air compressor operates by storing compressed air in a receiver tank. It must therefore be equipped with suitable safety devices to limit the risks associated with potential overpressure.

Our catalogue includes safety valve reference 5906101094, which replaces the previous reference 5906115059. This part is offered for various Scheppach, Woodster and Parkside compressors according to the compatibility information.

A safety valve may need replacing if it is damaged, develops an abnormal leak or has a confirmed malfunction.

Several situations should attract your attention:

  • A persistent air leak around the safety valve.
  • Visible damage to the valve body or its connection.
  • Abnormal operation of the safety device.
  • A missing or damaged component following an incident.

However, it is important not to confuse a defective safety valve with a pressure regulation problem. Repeated opening of the valve may also indicate a malfunction in the compressor control system.

A safety valve must never be blocked, bypassed or modified. Its replacement requires compliance with the pressure rating and technical specifications established for the machine.

If there is any doubt, have the compressor inspected by a qualified person before using it again.

Pressure Switch for Parkside Compressor: Controlling Automatic Starting

The compressor pressure switch, also known as a pressostat, plays an essential role in the automatic control of the motor.

It monitors the pressure inside the receiver tank and controls compressor operation according to the thresholds specified by the manufacturer.

When the pressure falls below the restart threshold, the pressure switch allows the motor to start again. When the specified maximum operating pressure is reached, it stops the motor.

Our selection includes pressure switch reference 5906115064, also associated with reference 5906103063 according to the manufacturer's information and compatible machines.

This component is offered for various Scheppach, Parkside and Woodster compressors.

A defective pressure switch may cause several symptoms:

  • The compressor no longer starts even though the pressure is insufficient.
  • The motor does not restart automatically after compressed air has been used.
  • The compressor operates with irregular starting and stopping cycles.
  • The control system no longer responds normally to pressure variations.

These symptoms do not necessarily mean that the pressure switch is responsible for the fault. A defective electrical supply, motor problem or pneumatic system malfunction may produce similar effects.

Before replacing the pressure switch, an appropriate diagnosis is therefore recommended.

Work on electrical components must be carried out with the power disconnected and by someone with the necessary technical skills.

It is also essential to maintain the operating specifications defined by the manufacturer, without changing the pressure thresholds beyond the authorised limits.

Transport Wheel for Parkside PSKO 24 A1 Compressor

The transport wheel for Parkside PSKO 24 A1 compressor is a particularly useful replacement part for maintaining the mobility and ease of use of your equipment.

A compressor fitted with wheels can be moved more easily around a garage, workshop or DIY area, provided that the manufacturer's handling recommendations are followed.

The wheels are regularly subjected to stress when the machine is moved. They may suffer impacts, gradual wear or structural damage.

Our catalogue includes a transport wheel specifically offered for the Parkside PSKO24A1 compressor.

Replacement may be necessary in several situations:

  • The wheel is cracked or broken.
  • The running surface is severely damaged.
  • The wheel no longer rotates correctly.
  • The compressor becomes difficult to move.
  • A damaged wheel affects the stability of the machine.

Before ordering, check the exact compressor model and the wheel mounting specifications.

During installation, make sure the wheel is correctly positioned and that the fastening components are in good condition.

An air compressor must always be placed on a stable, suitable surface before being operated.

Air Pipe for Parkside PSKO 24 A1 Compressor

The compressor air pipe allows compressed air to circulate between components of the pneumatic system, depending on its position within the machine.

It is an important component for ensuring proper operation and limiting pressure losses.

Our catalogue includes air pipe reference 5906131020, offered for various Scheppach and Parkside compressors.

This component has the following specifications:

  • Manufacturer reference: 5906131020.
  • Length: 280 mm.
  • Thread: M14 x 1.5.
  • Application: air circuit of compatible compressors.

A damaged air pipe may cause leakage, reduced performance or difficulty maintaining pressure in the circuit.

Signs of wear may include visible damage, deformation, damaged connections or a leak detected during an appropriate inspection.

Before ordering this air pipe for Parkside compressor, it is important to check its length, thread and compatibility with the exact version of your machine.

An air pipe with similar dimensions is not necessarily a suitable replacement. It must also meet the technical requirements of the relevant circuit.

Replacement must always be carried out with the compressor disconnected from the electrical supply, cooled down and completely depressurised.

Why Does My Parkside PSKO 24 A1 Compressor No Longer Start?

A Parkside PSKO 24 A1 compressor that no longer starts may have various electrical, mechanical or pneumatic faults.

Before considering the replacement of a component, it is important to understand how the machine behaves.

If the compressor does not respond to the starting control, several possible causes should be considered:

  • An absent or faulty electrical supply.
  • A defective pressure switch.
  • A triggered protective device.
  • A motor-related problem.
  • A mechanical fault preventing normal operation.

The pressure switch is one possible area to investigate, but its replacement should not be automatic.

If the motor operates but the compressor cannot reach the expected pressure, it may be more appropriate to investigate air leaks or compression losses.

Diagnosis must be carried out without bypassing safety devices or working on live electrical components.

Why Is My Parkside PSKO24A1 Compressor Losing Pressure?

A loss of pressure in a Parkside compressor may have several different causes.

A leak around a pneumatic connection, an air pipe or another component of the system may prevent normal pressure retention.

A damaged pipe or poorly sealed connection may allow air to escape, sometimes producing a hissing sound.

It is also possible that the leak comes from a different component than the one initially suspected.

To avoid unnecessary replacement, it is advisable to identify the exact location of the problem before ordering a part.

A safety valve releasing air should not automatically be considered defective. It is also important to check that the pressure regulation system is operating correctly and that pressures remain within the specified limits.

If the receiver tank or a safety component shows signs of a fault, the machine must be taken out of service until an appropriate inspection has been completed.

How to Choose the Correct Spare Part for Parkside PSKO 24 A1

To order a replacement part compatible with your Parkside PSKO 24 A1 compressor, we recommend carrying out several checks.

  • Identify the model: check the PSKO 24 A1 reference on the identification plate.
  • Record the IAN number: this information may help distinguish certain production versions.
  • Consult the exploded parts diagram: locate the position number of the component to be replaced.
  • Compare part references: check manufacturer codes and any replacement references.
  • Check dimensions: particularly for pipes, fittings and mounting components.
  • Verify technical specifications: especially for the pressure switch and safety valve.

For air pipe reference 5906131020, the 280 mm length and M14 x 1.5 thread are important specifications to compare.

For pressure switch reference 5906115064, the electrical characteristics and operating conditions must also be checked.

For safety valve reference 5906101094, the pressure rating must comply with the requirements of the machine.

Checking these references helps reduce the risk of ordering an unsuitable part.

Regular Maintenance of Your Parkside PSKO 24 A1 Air Compressor

Regular maintenance helps preserve compressor performance and reduce the risk of certain faults.

All maintenance operations must be carried out according to the manufacturer's operating instructions.

Useful checks include:

  • Regularly inspecting the general condition of the compressor.
  • Checking accessible pneumatic connections.
  • Monitoring possible air leaks.
  • Draining condensate from the receiver tank according to the manufacturer's instructions.
  • Checking that automatic starting and stopping operate correctly.
  • Inspecting the condition of the wheels and transport components.
  • Keeping ventilation openings clean and unobstructed.
  • Visually checking the condition of the power cable.
  • Respecting the pressure limits and operating times specified for the machine.

Before any maintenance operation, disconnect the compressor from the electrical supply, allow it to cool and make sure the relevant circuits are completely depressurised.

The compressed air receiver tank is a pressure vessel. It must never be drilled, welded or repaired using improvised methods.

Safety devices must always remain installed and operate according to the manufacturer's specifications.

Why Repair Your Parkside Compressor Instead of Replacing It?

When an air compressor develops a fault, replacing the entire machine is not always necessary.

If the malfunction is caused by an identifiable and replaceable component, a suitable repair may help extend the service life of your equipment.

Replacing a broken transport wheel, damaged air pipe or defective control component may be a practical solution when the rest of the compressor remains in good condition.

Repairing rather than replacing can also help reduce waste and limit the expense associated with purchasing new equipment.

However, it is essential to consider the overall condition of the compressor, the cost of repair and the relevant safety requirements.

Work involving the electrical system, pressure regulation components or safety devices should be carried out by someone with the necessary technical expertise.

Buy Parkside PSKO 24 A1 Compressor Spare Parts at Probois Machinoutils

Probois Machinoutils specialises in the sale of machinery, workshop equipment, accessories and spare parts for numerous brands.

We offer a developing selection of spare parts for Parkside PSKO 24 A1 air compressors to help you maintain and repair your equipment.

In this category, you will find:

  • Safety valve reference 5906101094, replacing reference 5906115059.
  • Pressure switch reference 5906115064, also associated with reference 5906103063 depending on the model.
  • Transport wheel for Parkside PSKO 24 A1 compressor.
  • Air pipe reference 5906131020, with a length of 280 mm and M14 x 1.5 thread.

Our catalogue may change depending on stock availability and the supply of spare parts from manufacturers.

Before ordering, carefully consult each product description and check the references, dimensions and technical specifications.

Whether you are looking for a safety valve for Parkside compressor, a PSKO24A1 pressure switch, a replacement transport wheel or an air pipe for your compressor, our selection helps you identify the components required to repair your machine.

By choosing a compatible spare part and following the manufacturer's maintenance recommendations, you can help preserve the performance of your Parkside PSKO 24 A1 compressor and extend its service life.