Crank n° 23 for planer thicknesser Zipper ZI-HB305 and Bernardo PT305
Crank handle reference 23 reference 1000968 for Zipper ZI-HB305 and Bernardo PT305 thicknesser planer
Crank handle reference 23 reference 1000968 for Zipper ZI-HB305 and Bernardo PT305 thicknesser planer
Blade cover reference 10001554 for Zipper ZI-HB305 and Bernardo PT305 planer thicknesser
Blade clamp for planer and thicknesser Zipper ZI-HB305 and Bernardo PT305
Single-phase KJD12 switch with emergency stop point for Zipper ZI-HB305, Zipper ZI-HB204 and Bernardo PT305 thicknesser planer
1800W single-phase motor for Scheppach HMS1250, Zipper ZI-HB305 and Bernardo PT305 planer and thicknesser
Iron clamping screw for Zipper ZI-HB305 and Bernardo PT305 jointer
This guide roller, mark 95, is dedicated to the Zipper ZI-HB305 and Bernardo PT305 planer and thicknesser
Belt Poly V 5PJ711 for Planer and thicknesser Scheppach HMS1250, Zipper HB305 and Bernardo PT305
Chip collector reference 10001313 for Zipper ZI-HB305 and Bernardo PT305 thicknesser planer
Carbon brushes for planer and thicknesser Kity, Woodster and Scheppach in 152mm, 204 mm, 254 and 305 mm
Belt Poly V 559J4 for wood machine Lurem
Are you looking for a spare part for your Zipper ZI-HB305 planer thicknesser to repair a fault, replace a worn component or carry out regular maintenance? At Probois Machinoutils, we offer a selection of replacement parts suitable for this Zipper woodworking machine.
The Zipper ZI-HB305 is a combined woodworking machine designed to perform two essential operations: surface planing, which produces flat faces and straight edges, and thicknessing, which brings timber to a consistent thickness.
With a working width of 305 mm, this planer thicknesser is particularly suitable for users who need to machine relatively wide timber while benefiting from both functions in a single machine.
Like any woodworking equipment, it contains mechanical, electrical and transmission components that may become worn or require replacement over time.
This category brings together various Zipper ZI-HB305 spare parts to make repairing and maintaining your machine easier without necessarily having to replace the entire equipment.
A planer thicknesser is subjected to significant mechanical loads during operation. The motor drives the cutterblock, while the transmission and feed mechanisms perform the various functions required for woodworking.
Regular use, natural component wear or a mechanical incident may cause certain parts to deteriorate.
To restore your machine to proper working condition, it is essential to select a replacement part compatible with the Zipper ZI-HB305.
Our catalogue includes drive belts, a feed roller, adjustment components, electrical parts, safety guard components and planer knife fixing elements.
Each component performs a specific function. Before replacing it, the defective part must be correctly identified and its compatibility with the machine confirmed.
Drive belts for the Zipper ZI-HB305 are important components that contribute to the correct operation of the machine.
Depending on their position, they transmit power from the motor to the relevant mechanisms. Their condition directly affects power transmission and the smooth operation of the equipment.
In this category, you can find Poly-V drive belts with references 711J5 / 5PJ711 and 559J4, suitable for the Zipper ZI-HB305 and certain other compatible planer thicknessers.
These two references are different and must not be confused. It is essential to identify the belt that needs replacing and its exact position before ordering.
A worn belt may show cracks, damaged ribs or a loss of tension. A broken belt can cause the driven mechanism to stop working.
If a belt repeatedly slips off its pulley or wears prematurely, the pulley alignment, belt tension and possible mechanical obstructions should also be checked.
Replacing a belt should not conceal a problem caused by another defective transmission component.
The feed roller for the Zipper ZI-HB305 is an essential component of the timber feed mechanism used during thicknessing operations.
It helps move the timber through the machine to ensure consistent machining.
A worn, damaged or incorrectly rotating feed roller may cause feeding difficulties, irregular movement or the workpiece becoming stuck during operation.
We offer a feed roller, position 95, designed for the Zipper ZI-HB305 and Bernardo PT305 planer thicknessers.
Before replacing this component, it is advisable to inspect the associated transmission elements and the general condition of the feed mechanism.
Accumulated wood chips, incorrect adjustments or a defective transmission system can sometimes produce symptoms similar to those caused by a damaged roller.
Accurate diagnosis helps identify the component that actually needs replacing.
The electric motor provides the power required to operate the planer thicknesser. It is one of the machine's main components.
This category includes a 1800 W single-phase electric motor for the Zipper ZI-HB305 planer thicknesser, also suitable for certain compatible Scheppach and Bernardo models.
A defective motor may cause starting difficulties, a lack of rotation or unexpected machine shutdowns.
However, these symptoms do not necessarily mean that the motor needs replacing.
Before carrying out any repairs, the electrical supply, control components and possible mechanical obstructions should be checked.
Motor replacement must be performed by a suitably qualified person, respecting the electrical specifications, mounting arrangements and safety devices specified by the manufacturer.
It is also important to verify the exact motor reference before placing an order.
The electrical control system allows the machine to be started and stopped according to its original design.
Among the spare parts available for the Zipper ZI-HB305 is a KJD12 10 A single-phase switch with emergency stop control.
This type of component may require replacement if it becomes defective or damaged.
A malfunctioning switch may prevent the machine from starting or cause abnormal operation of its electrical controls.
Before replacing an electrical component, its reference, specifications and compatibility with the original installation must be checked.
All electrical work must be carried out with the machine disconnected from the power supply and by a suitably qualified person.
Safety devices must never be removed, modified or bypassed in an attempt to operate a defective machine.
The cutterblock protection system plays an important role in operator safety during surface planing operations.
The bridge guard is designed to cover the part of the cutterblock that should not remain exposed during machining.
A broken, bent or incorrectly functioning guard arm must be inspected before the machine is used again.
Our selection includes a bridge guard arm, reference 10001554, suitable for the Zipper ZI-HB305 and Bernardo PT305.
Replacing this component should restore the original mounting arrangement and adjustment possibilities specified by the manufacturer.
It is essential to check that the complete guarding system operates correctly before restarting the planer thicknesser.
A machine with a missing or defective cutterblock guard must not be operated.
Correctly securing the planer knives to the cutterblock is essential for reliable and safe operation.
The fixing components must hold the knives securely in accordance with the manufacturer's instructions.
This category includes M6 x 16 mm clamping screws and planer knife clamping wedges, position 106, available in sets of two.
These components may require replacement if they become damaged, deformed or can no longer perform their intended function correctly.
A screw with damaged threads or a deformed clamping wedge should not be reused without proper inspection.
When replacing planer knives, the manufacturer's instructions concerning installation, positioning and tightening must always be followed.
Incorrectly secured planer knives present a serious safety risk. If there is any doubt about the installation or condition of the fixing components, the machine should be inspected by a qualified technician.
A planer thicknesser produces a considerable quantity of wood chips during machining.
The chip collection and extraction system helps keep the working areas clear and allows the machine to be connected to a suitable dust extraction system.
We offer a wood chip collector, reference 10001313, designed for the Zipper ZI-HB305 and certain compatible models.
A broken, cracked or deformed collector may interfere with chip evacuation and require replacement.
It is also advisable to check regularly that the chip passages are not obstructed and that the extraction hose is in good condition.
An appropriate dust extraction system helps reduce the accumulation of wood chips inside the machine and improves working conditions in the workshop.
The different adjustment mechanisms allow the machine to be adapted to the dimensions of the timber and the operations being performed.
A broken or worn adjustment handle may make certain settings difficult or even impossible.
In this category, you will find a thicknesser adjustment handle, position 23, reference 1000968, suitable for the Zipper ZI-HB305 and Bernardo PT305.
Before replacing a handle, it is advisable to check that the mechanism it operates moves freely.
Unusual resistance may indicate an underlying mechanical problem that should be identified before installing a new component.
Properly functioning adjustment mechanisms contribute to machining accuracy and comfortable operation of the planer thicknesser.
To order a spare part compatible with your Zipper ZI-HB305, it is important to check the information shown on your machine.
Zipper models ZI-HB204, ZI-HB204N, ZI-HB254, ZI-HB254N and ZI-HB305 may share certain characteristics, but their components are not necessarily interchangeable.
We recommend following these steps:
This procedure is particularly important for electrical components, transmission parts and safety-related elements.
If you are unsure which part you need, the information on the machine's identification plate and a photograph of the original component may help with identification.
Some Zipper ZI-HB305 spare parts are also suitable for other planer thicknesser models.
Our catalogue includes components listed for the Bernardo PT305 and, depending on the specific part, the Scheppach HMS1250.
This compatibility may concern drive belts, motors or various mechanical components.
However, it is essential to check each reference individually. The fact that two machines share certain components does not mean that all their spare parts are interchangeable.
To avoid ordering the wrong component, always consult the compatible models specified on the relevant product page.
Regular maintenance helps extend the service life of your Zipper ZI-HB305 planer thicknesser and reduces the risk of unexpected breakdowns.
After use, it is advisable to clean the tables and accessible areas to remove accumulated wood chips and dust.
Drive belts should be inspected periodically to identify possible signs of wear.
The timber feed mechanism should also be kept clean and operate without obstruction.
The condition of the planer knives, fixing elements and safety devices should be checked regularly.
Blunt planer knives can reduce cutting quality and increase the forces required during machining.
Before carrying out maintenance or replacing any component, the machine must be switched off and disconnected from the electrical supply.
Operations requiring significant dismantling must be performed in accordance with the manufacturer's instructions and by someone with the necessary technical skills.
Replacing a defective component can be an economical way to extend the useful life of a woodworking machine.
A broken drive belt, damaged adjustment handle, worn feed roller or defective wood chip collector does not necessarily require replacing the entire planer thicknesser.
At Probois Machinoutils, we continue to develop our selection of Zipper woodworking machine spare parts to help users maintain and repair their equipment.
Organising our catalogue by machine model makes it easier to find the correct replacement components.
We also offer spare parts for other Zipper planer thicknessers, including the ZI-HB204, ZI-HB204N, ZI-HB254 and ZI-HB254N models.
Whether you are looking for a Zipper ZI-HB305 drive belt, feed roller, switch, motor or planer knife fixing component, browse the references available in this category.
Discover spare parts for the Zipper ZI-HB305 planer thicknesser at Probois Machinoutils and extend the service life of your woodworking machine through appropriate maintenance and repairs.