Laser for radial miter saw Scheppach, Dexter, Woodster and Parkside
Laser Radial saw Scheppach, Dexter, Woodster and Parkside
Laser Radial saw Scheppach, Dexter, Woodster and Parkside
Slide for radial miter saw Scheppach, Woodster, Dexter and Parkside
Table insert for radial miter saw Scheppach, Parkside, Woodster and Dexter
Guide for radial miter saw Scheppach HM100LXU and MSS10
Blade protector for radial miter saw Scheppach, Dexter and Parkside
Motor for radial miter saw Scheppach HM80, Scheppach HM80LU, Scheppach HM80LXU, Scheppach MSS8, Scheppach MSS10, Scheppach HM100LXU, Woodster SX8LU, Woodster SL10LXU, Parkside PZKS 1500 A1, Dexter MS SL 8
Motor 3901207035 for Scheppach, Woodster, Parkside and Dexter radial miter saw
Are you looking for spare parts for your Dexter MS SL 10 sliding mitre saw? At Probois Machinoutils, we offer a selection of replacement components designed for the maintenance and repair of this machine, sold under the Dexter brand, particularly through Leroy Merlin stores.
The Dexter MS SL 10 sliding mitre saw, also searched for under the designation Dexter MSSL10, is used to make straight cuts, mitre cuts and bevel cuts in wood and other materials compatible with the machine and its equipment. It is particularly suitable for woodworking, cutting skirting boards, battens, mouldings and various interior fitting projects.
Over time and with repeated use, certain components may wear out, become damaged or develop faults. Replacing a defective part can help extend the service life of your saw without having to replace the entire machine.
This category includes various replacement parts for the Dexter MS SL 10 mitre saw, including electric motors, laser guides, sliding rails, cutting fences, blade guards and table inserts.
A sliding mitre saw consists of several mechanical and electrical assemblies that contribute to its proper operation. The motor drives the saw blade, while the adjustment and sliding mechanisms allow the cutting position to be adapted to the work being carried out.
Cutting fences help position the material, table inserts provide support near the blade opening, and protective devices contribute to user safety.
When a component becomes damaged, it is important to identify the exact cause of the problem before replacing it.
A saw that no longer starts does not necessarily have a defective motor. Similarly, a loss of cutting accuracy may be caused by incorrect adjustment, a worn saw blade or a damaged mechanical component.
The Dexter MS SL 10 spare parts available in this category allow users to find suitable components for certain maintenance and repair operations.
Before carrying out any work, the machine must be disconnected from the electrical supply. Electrical repairs and work involving safety devices must be performed by a suitably qualified person.
The electric motor of a sliding mitre saw is an essential component responsible for driving the saw blade during cutting operations.
In the event of a major failure, replacing the motor may be considered after carrying out the necessary checks to confirm the cause of the malfunction.
Our catalogue includes replacement motors for sliding mitre saws from Scheppach, Woodster, Parkside and Dexter, according to the compatibility information provided on the product pages.
Among the available references is the replacement motor part number 3901207035, designed for several sliding mitre saw models.
Before ordering a motor, it is essential to check the exact reference of your machine, the electrical specifications of the component and the manufacturer's compatibility information.
A motor that no longer works may show various symptoms, such as failure to start, intermittent operation, unusual noise or loss of power. However, these symptoms may also have other causes and do not necessarily confirm a motor failure.
Preliminary diagnosis helps avoid replacing an expensive component unnecessarily. Motor installation must be carried out in accordance with the machine's specifications and electrical safety requirements.
The laser guide for a sliding mitre saw is a practical accessory that projects a cutting reference onto the workpiece before cutting begins.
On machines equipped with this feature, the laser makes material positioning easier and can improve working comfort during repetitive cutting operations.
It is particularly useful when cutting skirting boards, trim, battens and other components requiring accurate positioning.
Over time, the laser module may develop a fault, stop lighting up or produce an irregular cutting reference.
This category includes a replacement laser for Scheppach, Dexter, Woodster and Parkside sliding mitre saws, subject to compatibility with the exact machine version.
Before purchasing, the module specifications and compatibility with the Dexter MS SL 10 saw should be checked.
After replacement, the laser beam position must be checked and adjusted if necessary, in accordance with the manufacturer's instructions. The laser is a positioning aid and does not replace measurements or safety devices.
The sliding mechanism is one of the defining features of a sliding mitre saw. It allows the cutting head to move along a guided travel path, making it possible to cut wider workpieces than those typically handled by a non-sliding mitre saw.
The guiding and sliding components must remain in good condition to ensure smooth and consistent movement of the cutting head.
A damaged or worn mitre saw sliding rail may cause difficult movement, sticking points or reduced smoothness in the sliding mechanism.
Our selection includes a sliding rail designed for various Scheppach, Woodster, Dexter and Parkside sliding mitre saws.
Before ordering this part, it is necessary to compare its shape, dimensions and mounting points with the original component.
It is also advisable to check that the problem is not caused by incorrect adjustment, dirt accumulation or another component of the sliding system.
A properly maintained sliding mechanism helps preserve smooth cutting head movement and makes woodworking operations easier.
The cutting fence of a sliding mitre saw plays an important role in positioning and supporting the wooden workpiece during cutting operations.
It provides a reference surface against which the material can be placed and contributes to consistent cutting accuracy.
A damaged, bent or incorrectly secured fence may lead to poor workpiece positioning and affect cutting precision.
This category includes the mitre saw fence part number 5901202001, offered for certain Scheppach machines and capable of replacing reference 3901207012 according to the stated compatibility information.
For use on a Dexter MS SL 10 saw, it is essential to check that the replacement matches the original fence, particularly in terms of dimensions and mounting points.
After replacement, perpendicularity and angle settings should be checked to ensure cutting performance remains consistent with the machine's specifications.
The blade guard for a sliding mitre saw is an essential safety device that helps reduce user exposure to the saw blade during operation.
Depending on the saw's design, the movable guard retracts as the cutting head is lowered and returns to its protective position when the head is raised.
A cracked, broken or incorrectly operating blade guard must be inspected and replaced if necessary.
Probois Machinoutils offers a replacement blade guard compatible with various Scheppach, Dexter and Parkside sliding mitre saws, according to the relevant machine references.
Before ordering, it is important to check the guard's shape, mounting points and exact compatibility with your model.
After installation, the protective mechanism must move freely and return correctly to its original position. The machine must never be used with a missing, jammed or deliberately disabled blade guard.
The table insert for a mitre saw is located around the opening through which the saw blade passes in the cutting table.
This component helps support the material close to the cutting area and limits the open space surrounding the blade, depending on the machine's design.
With repeated use, the insert may become marked, cracked or damaged following incorrect adjustment or a cutting incident.
A severely damaged insert may no longer perform its intended function and should be replaced when its condition prevents proper use of the saw.
Our catalogue includes table inserts for sliding mitre saws compatible with various Scheppach, Woodster, Parkside and Dexter references.
To choose the correct model, it is essential to compare the dimensions, shape, mounting holes and compatibility information provided on the product page.
When ordering a replacement part for a Dexter MS SL 10 sliding mitre saw, we recommend first checking the information on the machine's identification plate.
The commercial model name is not always sufficient to identify a component, as some machines may exist in several versions or have undergone modifications during production.
Before placing an order, we recommend carrying out the following checks:
These checks help reduce ordering errors, particularly when purchasing motors, guiding components and safety-related parts.
Some spare parts for sliding mitre saws can be used on several machines sold under different brand names.
Certain components are available for Dexter, Scheppach, Woodster or Parkside saws, including specific motors, laser guides, sliding rails, fences and blade guards.
This compatibility between certain models can make it easier to find replacement parts for machines that are no longer manufactured or sold.
However, a similar external appearance does not guarantee that two saws have identical or interchangeable components.
It is therefore essential to check the references and technical specifications of each part before ordering. The compatibility lists provided on product pages are an important resource for selecting the correct component.
When a mitre saw develops a localised fault, replacing a spare part can be a worthwhile way to extend its service life.
Replacing a damaged table insert, a defective fence, a faulty laser or a failed motor may restore the machine to working condition, provided that the fault has been correctly diagnosed and all safety requirements are respected.
Repairing a machine can also help prevent premature equipment replacement and reduce the amount of electrical and mechanical waste generated.
However, the overall condition of the machine must always be assessed. A saw with structural damage, a serious guiding defect or a problem affecting its safety devices must not be returned to service without appropriate repairs.
As a specialist in woodworking machinery, tools and spare parts, Probois Machinoutils helps users maintain and repair their equipment.
In this category dedicated to the Dexter MS SL 10 sliding mitre saw, you will find a selection of replacement components, including electric motors, laser guides, sliding rails, cutting fences, blade guards and table inserts.
Each product page provides available technical specifications and compatibility information to help you select the appropriate replacement part for your machine.
If you cannot find the reference you need, you can contact our customer service team with the exact model of your saw and, if possible, a photograph of the component to be replaced.
Explore our range of spare parts for Dexter MS SL 10 and MSSL10 sliding mitre saws to maintain your machine, carry out necessary repairs and continue your woodworking, DIY and interior fitting projects.