Hydraulic Cylinder For Metal Band Saw
Gearbox Seal C201-8 For Metal Band Saw
Three-phase motor for Holzmann BS712N metal band saw
Discover our selection of spare parts for the Holzmann BS712TOP metal bandsaw, designed for the maintenance, repair and restoration of your machine. Replacing a worn or damaged component can extend the service life of the bandsaw and help maintain accurate and consistent cutting performance.
The Holzmann BS712TOP is a robust metal bandsaw designed for cutting tubes, profiles and various metal workpieces. It features a belt drive with several blade speeds, a professional swivelling vice, a hydraulic cylinder for controlling the lowering speed of the saw arm and a coolant system.
Over time and with regular use, certain mechanical, hydraulic or electrical components may become worn. Bearings, blade guides, band wheels, pulleys, drive belts, hydraulic cylinder, vice components, coolant pump, switches or blade tensioning components may therefore need to be inspected or replaced.
The Holzmann BS712TOP metal bandsaw consists of numerous components that can be replaced individually. Depending on availability, this category includes various BS712TOP spare parts required for the maintenance and repair of your machine.
Available spare parts may include:
Our range of spare parts for the Holzmann BS712TOP metal bandsaw is regularly updated according to the availability of replacement components from the manufacturer.
The Holzmann BS712TOP uses a belt drive system. This allows different blade speeds to be selected in order to adapt the cutting conditions to the material being processed.
The machine offers four blade speeds: 22, 33, 45 and 65 m/min. Selecting the appropriate speed helps adapt the cutting conditions to the type of metal and the workpiece being cut.
Drive belts and pulleys are important components of this transmission system. A loose, worn or damaged belt can cause irregular operation, poor power transmission or vibration. The pulleys and their bearings should also be inspected if unusual noises or drive problems occur.
If a transmission problem occurs on a Holzmann BS712TOP, it is advisable to check the condition of the drive belt, pulleys, bearings and other transmission components before ordering a replacement part.
Correct blade guidance plays an essential role in the cutting accuracy of the Holzmann BS712TOP metal bandsaw. The machine features a bearing-mounted blade guide system designed to keep the bandsaw blade correctly positioned during cutting.
The bearings and other components of the blade guide system are subjected to significant loads during operation. With regular use, they may develop excessive play, become noisy or no longer guide the blade correctly.
Worn or incorrectly adjusted BS712TOP blade guides can cause blade deviation, vibration or irregular cutting. Before assuming that a new bandsaw blade is defective, it is therefore important to check the blade guide adjustment, bearing condition and blade tension.
The Holzmann BS712TOP features a hydraulic cylinder for progressively controlling the lowering speed of the saw arm. This system allows the descent of the saw arm to be adapted to the material and cross-section of the workpiece being cut.
A worn or faulty hydraulic cylinder can cause the saw arm to lower too quickly or irregularly, or make the lowering speed difficult to adjust. The mounting points, adjustments and other components associated with the lowering system should also be inspected if a problem occurs.
Replacing the BS712TOP hydraulic cylinder or one of its associated components can help restore smooth and correctly controlled movement of the saw arm.
The Holzmann BS712TOP features a professional swivelling vice designed to securely hold tubes, profiles and other metal workpieces during cutting. The adjustable vice also allows the machine to be set up for angled cuts.
The clamping screw, jaws, swivelling mechanism, shafts, handles and other vice components are regularly subjected to mechanical stress. Wear on these parts can cause excessive play or make clamping and angle adjustment less accurate.
A vice in good condition is essential to prevent the workpiece from moving during cutting. Incorrect clamping can reduce cutting accuracy, cause irregular cuts and place additional stress on the bandsaw blade.
The Holzmann BS712TOP can perform straight and angled cuts using its adjustment system. The swivelling mechanism, locking elements and associated components must remain correctly adjusted to maintain the accuracy of the machine.
If excessive play develops or the position becomes difficult to adjust or lock securely, the various components of the adjustment mechanism should be inspected.
Replacing a worn Holzmann BS712TOP angle adjustment component may be necessary to restore accurate positioning and secure clamping of the workpiece.
The Holzmann BS712TOP is equipped with a coolant system with pump designed for metal cutting operations. Cutting fluid is supplied to the cutting area to assist the bandsaw blade during operation.
A coolant pump that no longer operates correctly, a blocked line or another faulty component can interfere with the circulation of the coolant.
Before replacing the BS712TOP coolant pump, it is advisable to check its power supply and inspect the various components of the coolant circuit to identify the exact cause of the problem.
When cutting metal, chips can remain trapped between the teeth of the bandsaw blade. The Holzmann BS712TOP features a system designed to help remove these chips while the machine is operating.
A worn, incorrectly positioned or damaged blade brush becomes less effective and may allow more chips to circulate with the blade. It is therefore important to regularly check its condition and position.
Regular chip removal also helps protect the blade guides, band wheels and other components located along the path of the bandsaw blade.
The Holzmann BS712TOP features an automatic shut-off system at the end of the cutting cycle. When the saw arm reaches the end of its travel, the system stops the machine.
The mechanical and electrical components involved in this function must remain correctly adjusted and in good condition. If the bandsaw no longer stops correctly at the end of a cut, the relevant components should be inspected before continuing to use the machine.
The electrical system includes various components required for starting, controlling and operating the machine. A damaged switch or faulty electrical component may prevent the bandsaw from starting or cause abnormal operation.
Before ordering an electrical spare part for the Holzmann BS712TOP, always check the supply voltage, the specifications of the original component and the information shown on the machine identification plate.
Before carrying out any work on the electrical system, completely disconnect the machine from the power supply. Electrical repairs requiring specific expertise should be carried out by a suitably qualified person.
Regular maintenance helps extend the service life of the machine and reduce premature component wear. Metal chips should be regularly removed from around the blade guides, band wheels, vice and other moving parts.
Periodically check the condition and tension of the bandsaw blade, blade guides, bearings, drive belts, pulleys, hydraulic cylinder, vice and coolant system. Any excessive play, unusual noise or abnormal operation should be investigated before continuing to use the machine.
A wandering cut is not necessarily caused by a defective bandsaw blade. Incorrectly adjusted guides, worn bearings, incorrect blade tension, incorrect saw arm lowering adjustment or inadequate workpiece clamping can also cause cutting problems.
Regular inspection of the wear parts on the Holzmann BS712TOP can help identify a faulty component before it causes premature wear or damage to other parts.
The blade is one of the main consumable parts of this metal bandsaw. The Holzmann BS712TOP uses a 2360 x 20 x 0.9 mm bandsaw blade. The tooth pitch should then be selected according to the material, shape and cross-section of the workpiece being cut.
A worn or damaged blade, or a blade with an unsuitable tooth pitch, can result in slow, irregular or inaccurate cutting. Replacing the blade does not eliminate the need to inspect the blade guides, bearings and tensioning system.
When purchasing a bandsaw blade for the Holzmann BS712TOP, always check the required dimensions and select a tooth pitch suitable for your application.
Before ordering a spare part for your Holzmann BS712TOP metal bandsaw, consult the exploded diagram and spare parts list corresponding to your machine to accurately identify the required component and its position number.
This check is particularly important for electrical components, transmission parts, hydraulic components and coolant system parts. Some part references may differ depending on the version or production period of the machine.
IMPORTANT: BEFORE PURCHASING, always check the LIST OF COMPATIBLE MACHINES shown on the spare part product page. Depending on the component, you may also need to check the month and year of manufacture and the serial number of your machine.
The Holzmann BS712TOP and Holzmann BS712TOP-G are two different versions. The BS712TOP uses a belt drive with several blade speeds, while the BS712TOP-G uses a geared transmission for speed selection.
Transmission components are therefore not necessarily interchangeable between these two versions. Other components may also differ.
Do not rely solely on the appearance of the spare part. Always check the exact model designation, serial number and position number shown on the exploded diagram corresponding to your machine.
Not all spare parts for the Holzmann BS712TOP metal bandsaw are necessarily listed in our online catalogue. If you cannot find the component you need, consult the exploded diagram of your machine to identify its position number.
To help identify the correct spare part, provide the exact model of the bandsaw, its supply voltage, serial number, manufacturing date and the position number of the required component.
A photograph of the original part together with its main dimensions can also help with identification, particularly when a part number has changed or when several versions exist.
A faulty bearing, damaged blade guide, worn drive belt, hydraulic cylinder problem, worn vice component, faulty coolant pump, switch or blade tensioning component does not necessarily mean that the complete bandsaw needs to be replaced.
Many mechanical, hydraulic and electrical components can be replaced individually to repair your Holzmann BS712TOP metal bandsaw, restore correct operation and extend its service life.
Probois Machinoutils offers a constantly evolving range of spare parts for Holzmann metal bandsaws to help with the maintenance, repair and restoration of your machines.
Browse our Holzmann BS712TOP spare parts and use the exploded diagram together with the information shown on your machine to accurately identify the replacement component you need.
Add a stronger category call to actionReduce repeated BS712TOP keyword phrases
