Belt poly-V 762J5 for thicknesser from Kity Bestcombi 2000 and Scheppach Bestcombi 3.0
Cotton filter bag for planer and thicknesser Bernardo PT200ED
Pulley for planer thicknessers 204 mm and 254 mm width Kity, Scheppach and Woodstar brand
Tensioning mechanism for various small planer jointers
Belt 252J2 marker 183 for Bernardo PT200ED and Leman LODRA210 Planer and thicknesser
Motor 1250W for Planer thicknesser Bernardo PT200, Zipper ZI-HB204
Complete jointer fence compatible with Bernardo PT200(ED) and Leman LODRA210 jointer planers. Essential replacement part designed to ensure accurate wood guidance during jointing operations.
Bearing housing reference 3902202081, item 114, for Scheppach HMS850, HMS860, HT850, HMS2000, Kity PT8500, Woodstar PT85, Fox F22564-200, Bernardo PT200ED and Parkside PADM1250A1 planer thicknessers.
Needle bearing for various planer and thicknessers Scheppach and Woodster in width 204 mm
The Bernardo PT200ED planer thicknesser is a compact woodworking machine designed for preparing and dimensioning solid timber. It performs two essential woodworking operations: surface planing, which produces a flat reference face and a straight edge, and thicknessing, which reduces timber to the required uniform thickness.
Like any woodworking machine, the Bernardo PT200ED requires regular maintenance to preserve its performance and extend its service life. Over time, certain mechanical components may become worn, damaged or require replacement.
At Probois Machinoutils, we offer a selection of drive belts and spare parts for the Bernardo PT200ED planer thicknesser, allowing you to repair your machine without having to replace the entire equipment.
Our range includes Poly-V drive belts, a replacement motor, a planer fence, pulleys, a bearing housing and various mechanical components designed for the maintenance of this machine.
The Bernardo PT200ED drive belt plays an important role in the operation of the planer thicknesser.
It transmits movement between different mechanical components of the machine. Depending on its position, it may drive a working mechanism or another part of the transmission system.
A belt in good condition helps maintain efficient power transmission and reduces unnecessary performance losses.
Over time, drive belts may stretch, wear out, crack or lose their grip.
A defective belt can cause several symptoms, including:
Reduced machine performance.
Unusual noises coming from the transmission.
Abnormal vibrations during operation.
Belt slipping during start-up or under load.
Irregular operation of certain mechanisms.
In this category, you will find the 257J2 Poly-V belt, corresponding to part number 183 in the Bernardo PT200ED parts diagram.
This belt is also listed for the Leman LODRA210 planer thicknesser.
We also offer a 465J4 rubber Poly-V belt, used on various compact planer thicknessers.
This type of belt features several longitudinal ribs designed to transmit movement efficiently when fitted to compatible pulleys.
The 465J4 belt is listed for selected machines from Scheppach, Woodster and Bernardo, depending on the model and configuration.
Before ordering, it is essential to check the markings on the original belt and the compatibility information provided in the product description.
Two Poly-V belts may look similar while having different lengths, widths or numbers of ribs.
Choosing a correctly specified replacement drive belt is essential for proper installation and to help prevent premature wear.
The motor is one of the main components of a planer thicknesser.
It provides the power required to drive the cutting mechanisms and must be compatible with the machine's electrical and mechanical specifications.
Our selection includes a 1250 W replacement motor for 204 mm planer thicknessers, designed for selected compact machines from Kity, Scheppach, Bernardo and Zipper.
A motor may need replacing when a significant electrical or mechanical fault has been confirmed.
However, a machine that lacks power or fails to start does not necessarily have a defective motor.
Before considering motor replacement, we recommend checking:
The machine's electrical power supply.
The condition of the switch and safety devices.
The operation of the capacitor, where fitted.
Whether the mechanical components rotate freely.
The condition of the belts and transmission system.
The absence of mechanical blockage or excessive load.
These checks help avoid unnecessary motor replacement when the problem originates from another component.
The Bernardo PT200ED planer fence is an essential component for guiding timber during surface planing operations.
It provides a reference surface against which the edge of the workpiece can be supported, helping achieve consistent results and prepare timber accurately for joinery.
A fence in good condition contributes to machining precision, particularly when producing straight edges or working at specific angles.
We offer a complete planer fence compatible with the Bernardo PT200 and PT200ED, also listed for the Leman LODRA210, depending on the specific part reference.
Fence replacement may be necessary when it shows:
Significant deformation.
A damaged reference surface.
A deteriorated locking or fastening mechanism.
A mechanical defect preventing correct adjustment.
A broken component that compromises safe operation.
Before ordering, it is advisable to check whether the problem is caused by incorrect adjustment or a loose fastening mechanism rather than a damaged fence.
Drive pulleys are important components of the planer thicknesser's mechanical transmission system.
They guide and drive the belts, allowing movement to be transferred between different parts of the machine.
A damaged or misaligned pulley may cause accelerated belt wear, vibrations or unusual mechanical noises.
Our catalogue includes pulley reference 3902203020, also associated with reference 3902202059, used on selected 204 mm and 254 mm planer thicknessers.
This family of parts is associated with several machines from Kity, Scheppach, Woodstar and Zipper, depending on the reference.
It is important to check the dimensions, mounting arrangement and exact compatibility before ordering a pulley for your Bernardo PT200ED.
Bearings and bearing housings play an important role in supporting and guiding rotating shafts and mechanical components in a planer thicknesser.
They help keep mechanical elements correctly positioned and allow smooth rotation.
A damaged bearing housing or worn bearing may cause vibrations, unusual mechanical noise or excessive play.
We offer bearing housing reference 3902202081, part number 114, compatible with several compact planer thicknessers, including the Bernardo PT200ED.
This component may also be used on selected Scheppach, Kity, Woodstar, Fox and Parkside machines, depending on the model.
Needle roller bearings for various compact planer thicknessers are also available in this category.
Before replacing a bearing or bearing housing, we recommend checking the exact reference and dimensions of the original component.
A planer thicknesser produces a considerable amount of wood shavings during operation.
Suitable chip collection is essential to reduce the accumulation of debris inside the machine and maintain appropriate working conditions.
In this category, you will find a cotton filter bag for the Bernardo PT200ED planer thicknesser.
This bag forms part of the machine's designated chip collection and filtration arrangement.
It may need replacing if the fabric becomes torn, damaged or no longer provides adequate filtration.
Its condition should be checked regularly, and the manufacturer's instructions concerning dust extraction and chip collection should always be followed.
An appropriate collection system helps reduce machine contamination and improves working comfort.
A Bernardo PT200ED planer thicknesser spare part should be replaced when it shows wear or damage that may affect the machine's operation.
The warning signs vary depending on the component concerned.
A worn belt may slip or produce unusual noises. A damaged planer fence may affect surface planing accuracy. A deformed pulley may cause vibrations, while a worn bearing may produce significant mechanical noise.
However, it is essential to identify the actual cause of the problem before ordering a replacement part.
For example, a loss of power may be caused by a slipping belt, excessive depth of cut, blunt planer knives or an unsuitable electrical supply.
Similarly, vibrations may result from loose fasteners, a damaged pulley or another mechanical component.
An accurate diagnosis helps ensure that the correct spare part is selected for the repair.
Certain Bernardo PT200ED spare parts are also used on other compact planer thicknessers.
Depending on the reference, compatibility may include selected machines from Leman, Kity, Scheppach, Woodstar, Zipper, Fox and Parkside.
The Leman LODRA210, in particular, shares certain belt and mechanical component references with the Bernardo PT200ED.
However, this does not mean that all parts from these machines are interchangeable.
Dimensions, mounting systems and mechanical specifications may vary between models.
We therefore recommend checking the compatibility information on each product page before placing an order.
Regular maintenance helps preserve the performance of your Bernardo PT200ED planer thicknesser and reduces the risk of breakdowns.
Several straightforward checks should be carried out periodically:
Inspect the drive belts for cracks, deformation and signs of slipping.
Clean the surface planing and thicknessing tables to remove resin deposits and wood shavings.
Check the planer knives and replace or sharpen them when blunt, depending on their type.
Inspect the planer fence to ensure it is securely mounted and correctly adjusted.
Listen for unusual mechanical noises that may indicate a bearing or transmission problem.
Remove accumulated wood shavings to prevent them from obstructing mechanical components.
Check accessible fasteners and fixings in accordance with the machine's operating instructions.
It is also important to respect the machine's cutting capacity and adjust the depth of cut according to the width and hardness of the timber being processed.
Before carrying out any maintenance, cleaning or spare part replacement, the machine must be switched off and disconnected from the electrical supply.
All work should be performed in accordance with the manufacturer's recommendations.
When ordering a replacement part for the Bernardo PT200ED, it is important to identify the required component accurately.
Whenever possible, we recommend checking the reference marked on the original part or consulting the machine's exploded parts diagram.
For drive belts, the length, profile and number of ribs should be verified.
For mechanical components, dimensions and mounting arrangements are particularly important.
When replacing a motor, the electrical specifications, power rating and mounting configuration must also be taken into account.
These precautions help prevent ordering errors and make machine repairs easier.
At Probois Machinoutils, we offer a selection of spare parts for the Bernardo PT200ED planer thicknesser to help you maintain and repair your woodworking machine.
Our catalogue includes Poly-V drive belts, a 1250 W replacement motor, a complete planer fence, a filter bag, and various mechanical components such as pulleys and bearing housings.
Some of these parts are also compatible with other compact planer thicknessers, depending on the reference and machine model.
Our Bernardo spare parts range continues to evolve according to product availability and customer requirements.
If you are looking for a component that is not currently listed in this category, please contact us with the exact machine model and, whenever possible, the reference or position number shown in the exploded parts diagram.
Discover our selection of Bernardo PT200ED drive belts and spare parts to repair your planer thicknesser, replace worn components and extend the service life of your woodworking machine.
